What song are you listening to lol it sounds awesome

Just cut mine apart. Gonna take out top also..must line up actuator ..spray lube on all moving parts

Wth. The vent door gasket goes bad have to cut out a windows to get to door clean off old sticky gasket. Cover with hvac tape .no more stuck door focus is bad for this

Can I manually adjust the temperature control?

Thanks, Ron!

I believe its not a bad power tool kit for the price i like dewalt but its more pricey i just ordered this kit from ace hardware here in town. I paid $295.23 after tax, free shipping an it was $100 off regular sell price. Normally $369.99 at ace nice set 👌 i like that this set comes with the grinder

Thanks for share ❤❤❤❤❤

Well, it looks like this is my next project. I have the Maytag Bravos top loader, and I'm guessing this is the little problem. Before I get started, I wanted to know if anyone has used the upgraded metal hub replacement from amazon? I don't want to have to make this replacement again. Please advise me if i should just use the plastic replacement or the metal one. Thank you!

Thank you!

Outer lamp easy, what about the one ducked inside...

I have a Blackmagic ATEM Pro which requires wired internet. This looks like it would work, but I need to connect Hotel WiFi, and thus change the settings for every hotel. Plus hotel systems generally have security above the router layer, where a browser pops up asking for your name and room number. How would I reconfigure for each stay? Can it handle a password after WiFi connects?

Great review, literally best vid I’ve ever watched, good thing your him

Thanks! I got them in and it worked. The resister was pretty easy. The hardest part was putting the new blower back in...the screw holes were too tight to hand start the screws. Holding the blower up with one hand and ratcheting the screws in with the other was tough...ended up having my son hold the blower up while I put in the screws.

Love this. It works. You’re a genius!!!

Beautiful dodge behind you I’ve had 2 and want another

What were the symptoms of a failed master cylinder? My truck a 1985 F150 has just one front caliper that starts to hang up as I drive (brake). After sitting a while it retracts but then hangs up again. The forums are saying to check the vacuum booster pushrod length (supposed to be a hair or two under 1 inch). They are also saying it could be the proportioning valve. I might end up saying fudge it and replacing everything, just don’t tell my wife.

Ron, this is amazing! A question: can you duct tape the exhaust pipe to the connector piece to prevent the accumulation of lint and hair in the bottom cavity?

How about just turning them off for good

Great video, my washer is agitating like new. Clicked on your link for tip jar and it didnt work, might wanna check that out. Thanks so much for the useful video!

Yeah my plate wouldn't come off so I destroyed it man handled the washer to the road and bought a new one 😂

Thanks Ron!

It was good until I realized my spark plug wouldn’t go back in. Tried the new one and then the old one, neither would go all the way in

Awesome! Thanks for being so thorough...even down to the size of the wrench one needs.

Please help - my problem is my dimplex has a motor with a third brown wire. I have no idea what that 3rd wire is for and can’t find one with three wires (mine are white, brown, black) and it’s cw, 2-5w, 10rpm, 60hz, 120v.

is this the solution if the basket WILL spin during the spin cycle, but the wash plate DOES NOT SPIN during the rinse cycle???

This was exactly my problem! Thank you!!

Hi, thanks so much for the video. How can I find the person who buys the metal? Thank you 🙏🏻🙏🏻🙏🏻❤️

This is genius thank you! Just spent an hour with my arm between the frame and the bed trying to pry off the key with some channel locks on a 2010. Will try this now. I removed the key a while ago on another truck. They hooked end of the winch rod will fit right in after. The easiest way to do this is to remove the winch (two self tapping bolts) and knock it out with a hammer. I also like to fill the winch mechanism with some kind of rust proofer/ lube (white lithium/ fluid film/ etc).

tune your fuckin piano dude jeeze

Most people want to turn off the daytime running lights while driving because they make the car look ugly. Buy a Toyota, "DRL off" right on the light switch.

Most people want the daytime running lights off while driving because they make the car look ugly. Purchase a Toyota, "DRL off" right on the light switch.

Never buy a Ford focus

My light bar on off switch is not working. The light comes on if it is plugged in and I can’t turn it off. If I take out the cord. It goes off.

The drive hub plate on mine is fine and it still won’t agitate help!

I was able to fix mine without replacing it. Just follow his instructions to remove the panel in the footwear, pop off the black mechanism, stick a large bladed screwdriver into the rotating mechanism, and twist it. It freed up on mine. BTW - 8mm bolts, not 9mm

after finding no spark , first i would have put another good sparkplug in and checked for spark, if nothing then go onto the coil check. great tips so far Ron. my fuel is premix 50:1 it always looks like shit lol. even though its fresh fuel. great video

Bought one today because my blade bolts on my riding mower are stuck,wifes car needs brakes,and my trucks tires need rotated. Im almost 50 and can use all the help i can get,lol. Hopefully itll last me a few years. On the bright side theyre selling them for $29.99 now. With their new lines of merchandise coming out theyre probably phasing the chicago stuff out.

PERFECT thank you

max out at a dollar?

When replacing the primary is it plug and play or do you have to program it?

THANK YOU! I have one in a hallway but need to add to three bedrooms per fire marshall. Should I pull power from the hallways for all or should I run a sort of chain reaction from one new one to the next?

I need your help. I am up here in communist Canada and my Kenmore 90 series dryer is not starting. I first checked the circuit breaker and it’s fine. I noticed the door switch was no longing clicking and just dangling and the light in dryer would not come on when I opened it. So I replaced it. Dryer still would not start. I tested the thermal fuse with multimeter and it was unclear so I replaced it and still the dryer would not start. I tested the start button and it is working. Is it fair to assume the terminal/electrical port is fine bc the light comes in when I open the door so there is power to the dryer? What else could it be? Help 4:06

Good stuff Ron.

Did your mower come over on the Mayflower?

What’s the part called? I don’t have a junkyard around so I’d like to order the part. My slider also doesn’t work. Light gets stuck on neutral.

Saved me tons! Bought a farmhand for 20$ and was missing the whole chainbrake assembly, 13$ on amazon and its mint along with new fuel line and diaphragm for the carb

Thank you so much for this, it's been difficult to find a good guide on how to fix this problem. Out of curiosity, how has this repair been treating you since? Still working well?

Absolute life saver.

What if you can't get the clip back in after you get the new one screwed down?

Thanks , showed this to my son and he was able to replace the blower resistance, Problem solved. 4/28/24. BEFORE: vent was only blowing air when I turn the knob on the highest level