Detrital Geo

Пікірлер

@carloserazo6004 4 ай бұрын

En mi lectora se conecta pero aparece: 0 satélites y no me aparece la antena. Llevo 2 semanas de ese problema y no sé cómo solucionarlo

@bakedto420 5 ай бұрын

No issues, what battery did you use?

@deeprootslandscaping4499 9 ай бұрын

So how does it work?

@mmbodnar 9 ай бұрын

It works just fine, pretty much identical to the LV6548 from MPP Solar

@deeprootslandscaping4499 9 ай бұрын

@@mmbodnar have you heard of the moose battery they are selling?

@bellasouldesigns 15 күн бұрын

I have the 3.5w system but all of a sudden it says my batteries aren't hooked up when they are ? Have any issues there ?@@mmbodnar

@lancefesterboyle4298 10 ай бұрын

FIX - self check is interrupted because gimbal hits the surface. Just raise the front legs slightly using 2 paper clips and double sided tape

@DroneUpp 11 ай бұрын

My gimbal was worse over a year ago! Autel had to replace my drone. No questions asked. Please watch. kzbin.info/www/bejne/o5THfoOim8p1lbssi=GRTjtyoB039_kZHq

@sipalingraska 11 ай бұрын

How to overcome every 2 minutes the video record stops

@donaldmartin7109 Жыл бұрын

same problem with mine. to late to return. piece of junk.

@josephsimpson2595 Жыл бұрын

Does anyone have a fix yet? Autel has not replied to any of my concerns via email. I have a $600 drone that is useless without a camera. I'm very disappointed at Autel for the lack of concern. WOW!!

@aloeisthestuff9622 Жыл бұрын

The fact you had to make a Damn video to get a warranty claim going is Pure ABSURDITY. Autel is nothing but a Scam Company. I'm trying to make a warranty claim for a faulty unit during it's warranty period and Now there is no way to make contact with this Fake company.

@weseehowcommiegoogleis3770 Жыл бұрын

Now my Gimbal dampeners are rotting and falling apart. What to do? Where to get new ones??

@protonx7722 Жыл бұрын

exactly same issue with mine, I believe its software bug or component fail...

@1000sofusernames Жыл бұрын

My nano+ is constantly about 2 degree out on the horizon. It's not a deal breaker as I've got a processing preset set up but it's annoying

@mmbodnar Жыл бұрын

I would do a cold IMU calibration on a surface proven to be flat and level. Cold means run the IMU the first time you start it for the day before everything warms up too much. Then make sure you do a compass calibration with absolutely no metal objects nearby including watches and jewelry.. then ruin a gimbal calibration on the flat/level surface. good luck.

@1000sofusernames Жыл бұрын

Same here. I've got my dxo software preset all configured to deal with it but I end up taking pictures with tilt crop in mind now. I sort of forgive it as the pics are so good.

@Hinckley_Biker Жыл бұрын

Yep! Me too, brand new Evo nano out of the box. Did the update and the gimbal was going crazy?? It flies well enough with great footage, but it is all shaky and wonky!! I'm going to return for a refund, and I have no confidence in getting another after reading your comments! Looks like it's going to be a DJI!!

@mmbodnar Жыл бұрын

To be fair this was a manufacturing defect and was replaced by warranty fairly quickly.

@meanderingthoughts2927 Жыл бұрын

I have exactly the same problem with the gimbal...It seems that there is a design flaw somewhere...I will return mine for refund. It's a shame since the drone video quality is superb. But the gimbal flaw makes the drone useless.

@salvor1 Жыл бұрын

Yea, I think a few of us, hopefully not all, are having gimbal issues. The replacement had the same issues! FYI, I had to turn all volumes to max to hear you.

@itilia8943 Жыл бұрын

Failed product

@ElRanshowdelMen Жыл бұрын

M epasa lo mismo cuando le cambio de bateria, no se que tenga que ver, pero me funciona bien con una de las baterias y con otra no

@astolfoio5067 Жыл бұрын

1 dismount your sd card and save all your data before format the SD CARD 2 disinstall the application and reinstall 3 reset all your impostation 4 reset gimball and compass. I had the same problem with mine. Now It work like new. I hope the same for you.

@salvor1 Жыл бұрын

come on, make a video with enough volume to hear what you are saying.

@eddie.on_bikes 2 жыл бұрын

Same issue. I reported my problem today. Did you get some sort of solution on yours? The Autel support arranged any solution? T hanks in advance

@mmbodnar 2 жыл бұрын

Yes, the unit was replaced under warranty.

@tonymcclendon-hobbytime7727 2 жыл бұрын

just had a friend that got his today, same issue out of the box, brand new. look like a common issue to me. wow! Autel need to get it together

@rosariodesanchez8538 2 жыл бұрын

ME PASA LO MISMO. ACABO DE COMPRAR EL NANO + HACE 22 DIAS ME LLEGO A MEXICO Y DESDE EL PRIMER DIA ME FALLO EL GIMBAL LO REPORTE A AUTEL Y ME SOLICITARON MUCHOS REQUISITOS TECNICOS CUANDO POR FIN LOS PUEDE OBTENER ME DIJERON QUE ENVIE EL DRONE A USA Y ESPERE UN REEMPLAZO PERO TENGO QUE GASTAR COMO 350 DOLARES PARA ENVIO E IMPUESTOS DE IMPORTACION DEL NUEVO DRONE SIN CONSIDERAR QUE PAGUE 160 USD POR IMPORTACION DEL PRIMER DRONE , SON UN ASCO ESOS AUTEL NO RECOMENDADO

@Eclipse_Central 2 жыл бұрын

Did you find a fix for this?

@mmbodnar 2 жыл бұрын

The aircraft was replaced under warranty coverage.

@Eclipse_Central 2 жыл бұрын

@@mmbodnar yeah I had to pay for mine, but I got it back after 2 months of waiting and now it's broken again since they gave me a faulty gimbal 😆 I hope I don't have to pay again because it wasn't my fault it was theirs

@bogdanbogdan7310 2 жыл бұрын

@@Eclipse_CentralMine has the same issue described in the clip. Do you have any idea who I should contact for a repair?

@richiet6381 2 жыл бұрын

So did you guys ever figure it out?

@mmbodnar 2 жыл бұрын

Reached out to autel support and they said to sent it in for inspection. Something was wrong with the gimbal so the unit was replaced under warranty.

@Matanumi 2 жыл бұрын

A shame truly

@Matanumi 2 жыл бұрын

Super lame. Wish these drones could be more affordable with better service

@mmbodnar 2 жыл бұрын

As an update, the aircraft was replaced under warranty in a very smooth process.

@charleschamberlain53 2 жыл бұрын

What's wrong with the service?

@charlie1571 2 жыл бұрын

Sorry to see this. I know how frustrating this can be. Fortunately mine is working perfectly which is contradictory to my ongoing luck. You might delete the app then reinstall it. It has worked for me on other issues.

@mmbodnar 2 жыл бұрын

Thanks for the suggestion. It didn't help on this case but I appreciate it. I was able to chat with the support people so a solution may be in the works. It always sucks to have a brand new item need to be sent for repairs immediately. In this case I don't think it was defective as the gimbal cover was installed incorrectly at the factory which caused excess stress on the gimbal assembly for weeks. It is only the roll motor that is bad but that seems to cause a motor overload condition which kills power to the gimbal for 5 seconds before it tries to reset.

@charlie1571 2 жыл бұрын

@@mmbodnar I hope you can get it fixed. I know the feeling of a new item not working. Back in 1980 I bought a new Olds Cutless. Beautiful car but anything you can think of that will break down it did from the tranny up to the steering wheel. Now that really sucks.

@lifeisfuneh 2 жыл бұрын

Sorry to hear that :(

@mmbodnar 2 жыл бұрын

Appreciate it. Autel support is very busy with questions about the recent products but they are excellent when they get to your service ticket. Looks like I can send this in for warranty service.

@MadMax-vy9hk 2 жыл бұрын

It’s a piece of shit do what I did send the fucking thing back it’s nothing but a headache. Sorry about the language but I hate the dam thing.

@Lunafilms12 2 жыл бұрын

Sorry about your issue. Autel should exchange this for you no questions asked.

@mmbodnar 2 жыл бұрын

Thanks, yeah I would say so as well. I have rarely had to invoke a warranty but this one one for sure. Have not been able to enjoy it or have meaningful contact with Autel yet. Will update when resolved.

@felixreed5381 2 жыл бұрын

I have been having these same problems

@shsechas 2 жыл бұрын

I don't own the Nano+ but came across your video as I'm a autel owner of the Evo1. Anyhow I don't know if this is your issue but I saw this on KZbin "How to fix a sticky gimbal on the Nano + Here is the link: kzbin.info/www/bejne/qXq9pWevdsuslcU

@mmbodnar 2 жыл бұрын

Hey thanks. Yes I saw this video but my issue seems to be unrelated to the gimbal dampeners that he is talking about. The range of motion of the gimbal on my (brand new) drone is limited. I have reinstalled the FW but this looks like a mechanical issue to me so waiting for Autel to approve the warranty claim. I remember when first unpacking the drone that the gimbal camera was pushed up and crocked behind the gimbal cover.. I didnt thing much of it but perhaps because of this the gimbal mechanism was damaged in shipping.

@shsechas 2 жыл бұрын

@@mmbodnar I hope it works out with Autel fixing the issue. With customer service from both DJI and Autel. It's just a matter of whom you speak with, or just happen to get lucky. They have answers for everything, but it usually doesn't fix the problem.

@DroneSyndrome 2 жыл бұрын

I see that you’re still able to access the app. Try to do a gimbal calibration, turn it off after, then do an IMU calibration. Maybe this will fix the issue. You can also try removing the battery for 15-20minutes and then reinserting it. This might force a reset.

@mmbodnar 2 жыл бұрын

Thanks for the suggestion. When I try to do the gimbal calibration nothing happens. Once I got it to start the calibration moves but the gimbal could not tilt to the left (when looking at the front of the drone) so it just kept tilting to the right over and over. The IMU calibration is fine though. I am starting to thing it is a hardware issue but i would have thought they check the drone at the factory for these basic functions.

@gbkiller007 2 жыл бұрын

When it bumps the table the gimbal isn't getting its cell endpoint on initialisation. Hold the drone in your hand away from the flat surface and let it initialise smoothly. Is the problem still apparent?

@mmbodnar 2 жыл бұрын

Thanks and I thought the same. When I start it up away from the table it does the same initialization motions and the result is the same as shown in the video. The gimbal looks slightly down and sits there.

@bogdanbogdan7310 2 жыл бұрын

@@mmbodnar same issue. how I can prove it is a factory defect?

@lifeisfuneh 2 жыл бұрын

That's unfortunate :( Was it working properly before the FW "upgrade" ?

@mmbodnar 2 жыл бұрын

Good question. I did not inspect the gimbal function before the update. The quick start guide said to install the updates after charging the batteries to that is what I did. My mistake and it is a good reason to record unboxings i guess.

@Egge33 2 жыл бұрын

Let us know what Autel did to sove this problem. I don't have this problem but I will post this Video in our Facebook Group just to see if anypody has a solution already!

@mmbodnar 2 жыл бұрын

Thanks, I will let the community know if this is resolved by software or if it needed hardware attention.

@RickaB 2 жыл бұрын

Hello, sorry to see this but in some respects I’m pleased because it’s exactly the same problem with mine, I’m in the UK. Mine does the same at start up - the gimbal moves then it just won’t work at all, the only thing I can do which seems to help, is power down and replace the battery and usually after a couple of cycles of battery replacements, the gimbal decides to work, at which point I’ve lost interest in flying! I’ve had this problem since I got it and on all firmware versions and like yourself, I have tried numerous different ways of approaching with no real solution I emailed Autel (EU) as soon as I got it, I’ve chased three times, and they said their engineers are working on it! I sent them this video kzbin.info/www/bejne/qoC2Yn6GeKypqbc There is clearly a fault, if I hear anything I’ll let you know, likewise I’ll keep looking back at your channel

@ladislavtt3240 2 жыл бұрын

Dobrý den, mám úplně nový Autel Nano + a po nahrání nového firmware V1.3.26 mám úplně stejný problém. Už se vám to podařilo nějak vyřešit ?

@review9564 2 жыл бұрын

Did you Uninstall the app then restall it. That usually fixes problems. Hope it helps

@mmbodnar 2 жыл бұрын

I tried a different device and installed the firmware another 2 times.. Same result.

@ozstrayapanoramas8610 2 жыл бұрын

Contact troubleshooter Ken Booth at Autel

@mmbodnar 2 жыл бұрын

That would be nice. I end an email to Autel Support to get some advice, will see what they say.

@aldo1993able 2 жыл бұрын

Como resolver esse erro ??

@mmbodnar 2 жыл бұрын

The data connector on the back beside the battery was replaced.

@fdocarvajal7 3 жыл бұрын

I have the same problem, did you solve it?

@mmbodnar 2 жыл бұрын

Unfortunately I did not. I had to sell the unit for parts.

@wilsonlopezpizango9029 3 жыл бұрын

Buenas tardes, veo que de mi, no se pone 78cm solo queda en 5.9 m

@mmbodnar 3 жыл бұрын

HOLA, ¿estás usando el GEOXH? Si es así, le sugiero que se asegure de que la opción SBAS esté activada. También debe estar en el área de cobertura como se muestra aquí: blog.junipersys.com/how-does-sbas-improve-gps-free-sbas-coverage-map/

@wilsonlopezpizango9029 3 жыл бұрын

@@mmbodnar Es geoxt

@mmbodnar 3 жыл бұрын

@@wilsonlopezpizango9029 299 / 5000 Translation results Hola, si tiene GeoXT, puede esperar una precisión cercana a 1 m con SBAS. Lo más probable es que esté entre 75-100 cm. El GeoXH es de doble frecuencia y puede alcanzar una precisión de 40-60 cm con SBAS. Más información: www.fieldenvironmental.com/assets/files/Literature/Trimble%20GeoXH%206000%20FAQs.pdf

@wilsonlopezpizango9029 3 жыл бұрын

Buenos días, una consulta como se realiza la ubicación de un punto.