@@paynegarage6782 in the chinese taobao marketplace

Опустил её в жидкость для очистки труб.

Hello , i have usual compressor with 3l Tank. Fengda FD-186 label on it. Thank you

@@Scaleautoshop thanks!

you can spray it before polishing. and then overspray will dissapear after sanding and polishing.

Hello Friend, this is heatgun from ali express noname brand 🙂

thanks!

Thank you very much!

thanks!

do you mean a kit or assembled model ? for kit look any webshop keywords Tamiya 24361

こんにちは、再販まで今しばらくお待ちください www.1999.co.jp/10605290

thanks my dear friend, what about blue cuttingmat ?

@ it is still there 😁

my bad 😨

Ok deal!

Обычная авто грунтовка

​@@Scaleautoshop спасибо! попробую

left and right walls in the central tunnel are symmetrical. If you mean right side under dashboard it should be covered. Left side as in the real pics. anyway there is no cf in the box at all 😁

thanks friend, i have another full detail MFH 😄

@@Scaleautoshop what exactly do you have? :D

Porsche 917/30

@ oh, that’s great. I supposed because Porsche from Tamiya coming in very soon, your next video will be about this model? 😃

i wanted to do Tamiya's 911, but seems to be it looks from every corner 😁 let me finish videos to McLaren

Thanks 👍

thanks friend!

Thank you ＼(ﾟｰﾟ＼)

why 🙂

@@Scaleautoshop don’t you have other important things to do? 😂

here is friendly vibes only please 😁🫵☝️

thank you friend

i use online webshops, there is a plenty of them. domino.be etc.

thanks my friend

(⓿_⓿)

these parts are out of box 😄

Thanks! 😁

thankx ! :)

Thank you 🤗

thanks friend, may be, after McLaren 🙂

@@Scaleautoshop I crossed my fingers hah. Btw when you will applied new video from McLaren’s build? Can’t wait

@@Krzynchuu hopefully tomorrow, i am foing it right now

ヾ(•ω•`)o

Hello, this is 1k.

thanks!

thanks! me too :)

Привет Николай! Да тогда не был искушен в типах лака, залил эмалевым, а он что-то не прижился. Я их вообще боюсь использоваться для кузовщины (эмалевые). А может быть причина - не было глянцевого слоя под декалями и они там номинально держались. А может быть причина случай так выпал.

@@Scaleautoshop А сейчас бы какой лак применил?

модельный полуглянцевый прозрачный 😄 C181 mr Hobby

Hey man, you need a LOT of effort to build this model 😄i would it not recommend, only if you are Mr. Prini 😁

@@Scaleautoshop that bad???🙁

not bad, but if you want to get a very good result, must work.

@@Scaleautoshop I'm used to it. Will probably pick it up. I'm working on an old reissue of an 80's monogram kit at the moment. Mold lines, flash, parts shrinkage...anyway, thanks for the quick response Oleg. You should consider doing tips and tricks videos my man. You do good work. LMAO, share the knowledge

Glad it was helpful!

thanks!

Hello man, thanks! step by step. 1. used 1k primer. this is an automotive primer from ebay like this one (mine is not available more). www.ebay.de/itm/371362413684 2. GX100 dilute it with mr levelling thinner on your own rate suitable for room temperature and nozzle diam. I do not have here exact ratio, just not too thin and not too thick. 3. 4x layers with about 2 hours between. In my case 1st layer in the evening after work then 2nd layer in about 3 hours. Next day the same, i do not hurry with clearcoating. 4. let it cure about 1x week or more. 5. godhand 4000 is enought for sanding as first step. then 6000 and 8000 (may be 6000 enough if you sand it thorougly. 6. polishing tamiya coarse then fine and then finish. i use proxxon and sponge. 7. wax optionally (helps to prevent fingerprints for a short time)

Thank you! 😊

Many thanks man

thank you!

need a kit for that. =)

thanks , i am trying

i will try, thanks !

Great to hear Karl

thanks mate

Thanks 👍 My Friend