No, that cannot be done simultaneously. The CSV files can be created afterward, either by using the RAVI Converter or by saving them in PIX Connect. You can save the temperature-time diagram at any time or take snapshots of the entire IR image or the temperature profile. If you wants to record data during the process, it can be done either via an analog signal into a data logger or by continuously querying the COM port using serial communication. For further information regarding the PIX Connect, please contact us at +4930500197-0 or by e-mail at [email protected] Best regards your Optris Team

Dear Dudihermawandi446, you can put together your offer at the following website. www.optris.com/en/product/infrared-cameras/xi-series/xi-400-cm/ As we have a selection of 4 different optics, we will have to ask you to put this together yourself or send an e-mail with your requirements to [email protected]. Best regards your Optris Team

Hi Adrien, We offer the following optics (Field of View) for the Xi 400: 18° x 14° (f = 20) 29° x 22° (f = 12.7) 53° x 38° (f = 7.7) 80° x 54° (f = 5.7) In principle, the focus is infinite. However, for precise measurement, a pixel grid of at least 3x3 is required. You can always use our Calculator app to determine your exact measuring field: www.optris.com/en/optris-calculator/ Best regards your Optris Team

@@Optris Thank you for your reply.

Hi Dustin, thanks for your comment. It is indeed intentional that the audio in this video is muted after the intro to focus on our unique XI series.

Glad you liked it!

Thank you so much 😊

Many thanks!

Thank you! Cheers!

Hi Njaha8123, the laser can be activated/ deactivated via the programming keys on the unit or via the software. If the laser is activated a yellow LED will shine (beside temperature PIF display). At ambient temperatures >50 °C inside the electronic box the laser will switch off automatically. Hope this helps you, otherwise please send an email to [email protected] we will be happy to help you.

Thank you! Cheers!

Hi Tilen, the alarm signal (or the temperature value) can be output as an analogue value via the analogue output. This can be connected to a PLC controller, a siren or an alarm light. I hope this helps you. Alternatively, please send us your question again to [email protected] and we will certainly be able to help you.

Hi Hamid, should the water be measured through the PTFE? That is not possible, unless its very thin (<200 µm), which will not exist. Then simply measure the PTFE with LT device. Otherwise with LT device directly on the water if possible. For example CTfast LT or CT LT could be used. Simply contact us at [email protected] and we will be able to advise you.

Unfortunately , it is not possible to retrieve the time information from the exported .dat file header direct from the RAVI file.

Thank you for your very quick response @@Optris! What I do not get however is, how the PIX Connect Software would then be able to export this information? Is it simply the case that the information is in the .ravi file and you just do not want to disclose the way it could be retrieved or is it really actually not encoded in the .ravi file?

@@YannickDaniel-j9u Please excuse the late reply the temperature-time diagram can be exported from the RAVi: To do this, the video file must be run through completely once in PIX connect. Then you should find the item "Save Temp/Time diagram data" under the menu item "File", which provides you with exactly this functionality. Alternatively, feel free to send us an email to [email protected].

Hello, unfortunately, it is not possible to adjust the time interval for the data. You have only the possibility to delete the not needed lines (times) manually in the *dat file.

Yes, it is possible to enlarge a specific area (digital zoom) and then save it as a snapshot. To do this, you have to go to the Pix connect software under Configurations --> IR Image arranging --> "Zoom" Pick rectangle for user defindes zoom: --> if the desired area is visible, an image can be created using the normal screenshot function. If anything is still unclear, please send an email to [email protected] and we will be happy to help you.

The resolution regarding the camera image of the recorded RAVI file will not change , if you change the speed of the replayed video But the temporal resolution changes if you speed up the video. There is currently no possibiltiy to employ a video codec instead of storing the camera feed as uncompressed YUV frames. With the software PIXConnect you can only do a capture screen and as result you will have a WMV file. Another possibility is to use the ConnectedSDK to transfer all pixels of the live image as temperature- ,color- or as ADUs matrix to your own programmed software. You can handle the data for yourself. You can find the ConnectedSDK in the software PIXConnect. For further information regarding the PIX Connect, please contact us at +4930500197-0 or by e-mail at [email protected] Best regards your Optris Team

Hallo, auch für die Xi 410 gibt es ein entsprechendes Tutorialvideo; dieses finden Sie hier: kzbin.info/www/bejne/h4KrdKutnNyJbKs Die Xi 410 und die Xi 400 besitzen die selbe Tubuslänge und eine unterschiedliche zur Xi 80, daher kommt es zu dem, von ihnen beschriebenen Problem. Ich hoffe diese Antwort hilft Ihnen weiter, ansonsten wenden Sie sich bitte an unseren Optris Service via: [email protected]

Hello, Usually, the web server function works on any smart phone. It is important that the smart phone is connected to the same WiFi network as the PC or laptop with the PIX Connect software installed. We hope that this answer helps you. If you need further help, please contact our support team via: [email protected]

Hello, within the PIX Connect software you can create as many measurement fields as you like and link each one with an alarm (so you get an alarm message in the software). On the hardware side you can link up to 9 alarm systems to the software with our industrial process interface (PIF). I hope the answer helps you, otherwise please contact our support at: [email protected]

@@Optris It was a big help! Thanks for helping

Hi Heinrich Hein, Thank you for your advice and apologise for the inconvenience. We will pass it on to the appropriate departments. For further information regarding the PIX Connect and the corresponding download options, please contact us at +4930500197-0 or by e-mail at [email protected] Best regards your Optris Team

Hi Heinrich Hein, Thank you for the compliment. We are always open to suggestions for improvement and optimization just contact us on +4930500197-0 or [email protected] Have a nice day and greetings from your Optris Team

Hi Алексей Михайлович, When using the Xi 410 camera, an important additional setting must be made for autonomous operation. When all the configurations have been made, it is important to write them to the device. This is done in the menu under Devices and Set configuration to device. See also the Xi operators manual, page 80. Hope this answer helps you! You can also find the user manual here: www.optris.global/xi-410 (see the manual tab) Best regards and come well into the new year, your Optris Team

yes, you can do this via file - save temp/time diagram data. But the video should be playing from the beginning to the end when you select to save

You can create with the software PIXConnect a temperature profile where you can see the temperature distribution on the line. You can also bind in an automatic way some measure areas on the temperature profile line. (See menue: Configuration => Temp Profiles => Bind measure areas to profile.)

Hello Mohd Iqbal Mustaparudin , please contact our support via @Mail: [email protected]. Our application engineers will be able to help you with your request. Thank you very much and greetings, Your Optris Team

Hello Kenneth Meinert, please contact our support via @Mail: [email protected]. Our application engineers will be able to help you with your request. Thank you very much and greetings, Your Optris Team

Hello Mohd Iqbal Mustaparudin the water flows through the entire cylinder.

@@Optris Thanks for quick reply.I assume so because it seems like the straight part of the cylinder has no gap in it. Glad you clarify it. Currently waiting to receive 2 units of this model. Is there any specific pressure limit for the water flow? 5 l/min through hose of 6 mm ID, the pressure must be quite high, right?

@@mohdiqbalmustaparudin4700 you are welcome The water flow rate is approx. 1-5l/ min. We recommend not to exceed a water flow of 5l/ min. In addition, the cooling water temperature should not exceed 30°C. Greetings, your optris team