Needs stage 2 performance parts. Then that engine I rebuilt would shred those rear tires
@dereksgarage1856Ай бұрын
Please not my tires they aren't cheap!
@RedlineNitroWerksАй бұрын
@@dereksgarage1856 like that matters??? I got parts to hook you up always
@favulus1Ай бұрын
@@dereksgarage1856 it's fine just the way it is. All your wanting to do is enjoy the moment. Some people are looking to destroy and repair which is insane to me.
@dereksgarage1856Ай бұрын
Not looking to destroy the car in any way but I would like to make it run as good as I can. The header and pipe are redlines stuff he wanted me to try out I plan on doing a side exhaust and maybe a gear change to help off road Im currently im on vacation and im finding I would like more low end on it don't care to much to go fast.
@favulus1Ай бұрын
@@dereksgarage1856 same here I'm going to set my mp9 up for offroading not so much speed.
@TexasHillАй бұрын
Good Job man ! came out Great !!!
@stuartj9842Ай бұрын
You should just put the traxxas 3.3 engine as its 3.3cc !!!
@joezambrano9651Ай бұрын
Very cool bike amigo
@RedlineNitroWerksАй бұрын
Oh fuck yeah 👍 you got the os 12cv I rebuilt for you running and swapped into the hawk. Glad to see the old girl back and running again
@RedlineNitroWerksАй бұрын
I want to see you upload videos of the traxxas nitro hawk up and running again with that os 12cv I rebuilt for you
@dereksgarage1856Ай бұрын
Patience young Padawan
@jayvlog9841Ай бұрын
how do u install front break
@voneboyАй бұрын
A Kyosho Nitro Viper GT ,that’s dope dude🤟😎 To tune nitro boats even when you don’t forget the tuning screwdriver is on the beginning kind of tricky ,because the engine behavior acts completely different as soon it is on load on the water.Let me give you a little advice: As soon as the engine is running on load on water the mixture which is reaching the combustion chamber gets a lot „richer“ because of the lower rpm the engine runs on the Same trottle setting as soon as it’s under load ! I’ve run between other nitro related stuff some nitro boats, some of them I’ve already uploaded here on my little KZbin channel ,feel free to check these like my Kyosho Lamborghini C1 cat frp 😊 However,if you run in issues or have further nitro boating related questions ,just ask, since I’m always happy to see other guys running nitros on 💦💥
@dereksgarage1856Ай бұрын
Yeah I was thinking that. I've been working on a remote starting system to get it back to shore when the engine dies on me
@voneboyАй бұрын
@@dereksgarage1856 I use to bring an rc rescue boat with me for the case that I must recover one of the boats I would say that it’s almost easier and safer to build a rescue boat, In fact it would be enough if you put on a dirt cheap little electric boat a slightly tilted pool noodle or some kind of a longer foam piece on his front😉 Because the downside on a „recovery system“ is the extra weight and also the fact that you wouldn’t have the capability to recover it if it flips😊
@vdubvanceАй бұрын
Carry a measuring tape, you can extend a fat max about 20 feet before it falls on you.
@dereksgarage1856Ай бұрын
Not a bad idea
@needmoreboost6369Ай бұрын
I remember these! I’ve still got an air streak although it’s got more repairs than original hull! That margarine tub abs isn’t made for decades of use. it ended up being brushless swapped for it’s last run’s before retirement
@StevenGilbert88Ай бұрын
Sounds over propped
@tonydetwiler2624Ай бұрын
are you giving it all that thing is slow for being 3s my vxl rustler is way harder on pulling with 3s in it
@dereksgarage1856Ай бұрын
If you give it all the beans it will flip. So no
@tonydetwiler2624Ай бұрын
@@dereksgarage1856 add a wheely bar 💨
@RedlineNitroWerksАй бұрын
Cool
@LaqkaraczaАй бұрын
kamerzysta za nie cale trzysta
@LIFEISGOOD1972 ай бұрын
Those Traxxas NITRO HAWKS have a special kool vintage chassi design just as Tamiyas TR15T with Drum brakes&fiber glass components.
@dereksgarage18562 ай бұрын
I am hoping to get a new engine for it soon
@RedlineNitroWerksАй бұрын
Well you will have the new os engine swap coming to you soon once I’m done working on it
@user-yd4fp9jw2s2 ай бұрын
pretty cool man
@dereksgarage18562 ай бұрын
Thanks
@RedlineNitroWerks2 ай бұрын
Sweet
@RCDUSSE2 ай бұрын
Oh yeah I have a jato coming Sunday! 🎉
@dereksgarage18562 ай бұрын
I really should fix up this jato. One of the wheels is off the cage is off and the panels I did are sitting under it.
@RCDUSSE2 ай бұрын
@@dereksgarage1856 yeah I have mainly Traxxas nitros at the moment so I can’t wait to add the jato this weekend has os 11k carb as well should be fast
@RCDUSSE2 ай бұрын
So damn cool as well you got some goodies for sure! 👍
@RCDUSSE2 ай бұрын
So freaking cool!!! 🎉Nitro Gang is alive and well nice collection I’m on my way haha 🎉
@RedlineNitroWerks2 ай бұрын
Hell yeah 👍
@TheKing-dm3br2 ай бұрын
Fast, slow, mid, idc. She's a beaut! ❤️
@RedlineNitroWerks2 ай бұрын
Sweet
@RedlineNitroWerks2 ай бұрын
Nice 👍
@Whisperingwindofsecrets2 ай бұрын
cant hear you fix your volume please how fast did you go and can you regular peddle like a bike . i said this backward you get it thanks
@dereksgarage18562 ай бұрын
You're not the first person to complain about the volume change I didn't spend enough time editing the video and I can't fix it now. Yes you can still pedal it like a normal bicycle
@Whisperingwindofsecrets2 ай бұрын
lolo . i need help with my stuff nobody are around lol keep up the good work can i peddle like bikecycle
@Whisperingwindofsecrets2 ай бұрын
like to get one how fast does it go .imlooking to peddle for exercise and ride with the wind and dont need to regis....
@dereksgarage18562 ай бұрын
Mine will hit 30mph down hill with some good wind behind me im about a180lbs. Lighter person might go faster
@Whisperingwindofsecrets2 ай бұрын
lolo thanks where did your getyours, u had to assemble it yourself correct? and you dont need a license plate correct? no peddle for fitness lol i do need it
@waynehamblin11282 ай бұрын
I was wearing sandals on my occ when i laid it over in a cirner, the front sprocket chopped half my big toe off. You made the right call.
@erichzann29663 ай бұрын
What did you use for the rear brake light?
@joedoran69943 ай бұрын
Great video mate awesome car the body looks like something I’d have made on need for speed most wanted back in the day love it
@dereksgarage18563 ай бұрын
That was the idea I've played nfs underground 2 a lot growing up
@andyarcos89513 ай бұрын
I have a nitro hawk and broke my front left control arm. You guys know where I can get a replacement arm.
@dereksgarage18563 ай бұрын
EBay maybe. But the nitro rustler front arms should work if you cant find hawk arms
@michaelgraham29433 ай бұрын
Looks great 👍
@dereksgarage18563 ай бұрын
Thank you
@ChristinanathanWesterfie-pr4jj3 ай бұрын
I got one of these but it's needing parts (rear tire, tube, rim, front fork assembly including bearing cups). If u can recommend a site, individual selling parts or other source plz reply. Cheers!!
@dynamicdirector51563 ай бұрын
I would love to have been that seat on that bike
@dereksgarage18563 ай бұрын
Aye yo wtf?
@dynamicdirector51563 ай бұрын
@@dereksgarage1856 😂
@diatonicdoug65254 ай бұрын
Where is rear brake?
@dereksgarage18564 ай бұрын
The stock break mounting point broke off
@michaelgraham29434 ай бұрын
Surprised it would even run.
@dereksgarage18564 ай бұрын
Ive made this mistake twice. Once when I first rebuilding my jato 3.3 and now years later with this t maxx.
@RedlineNitroWerks4 ай бұрын
Hell yeah can’t wait to get my car
@brenthood23374 ай бұрын
I don't miss nitro at all.
@dereksgarage18564 ай бұрын
That is completely understandable. At the end of the day what ever makes you happy is what you should be doing. For some reason I just am fascinated when these tiny engines do work.
@David-0694 ай бұрын
That’s a nice Traxxas what happened did the rod break
@dereksgarage18564 ай бұрын
No the rod is not broken from what I can tell. I haven't been able to pull the head off to check the top end. The engine locked up when I was trying to start at home. I am hoping the it was just the fly wheel being loose and the crank then wasn't help on place and the rod just took off the edge of the case material. All that said I don't really know if the engine is toast or just beat up a little and will be ok once I clean it out.
@David-0694 ай бұрын
@@dereksgarage1856 it sounds like the edge of the crank has been catching on the bottom of the crank case. on the 15cv there’s a shim on the inside of the back plate it goes between the backplate bushing and the starter shaft check to see if it’s still there and hasn’t fallen off have a look at the piston and sleeve and check the rod bushings there could be more damage in there.
@MR.B.16204 ай бұрын
Oh Man...i have an OS I've got to check and fear the same thing has happened... race you to Jennys!
@dereksgarage18564 ай бұрын
Head bolts are striped im going to have to drill them out
@MR.B.16204 ай бұрын
@@dereksgarage1856 Im new to all of it so this is the first engine I'll actually open up. There's a need to open a couple more that I have too, about time to get dirty
@dereksgarage18564 ай бұрын
Go sub sub to the bug 404 he has many great videos on taking nitro engines apart and cleaning them
@MR.B.16204 ай бұрын
@@dereksgarage1856 that's awesome, will do!!!
@official.kishon79324 ай бұрын
I let the Bubble out then put em back together
@official.kishon79324 ай бұрын
Nice just got one
@dereksgarage18564 ай бұрын
Got one of what?
@87ricer4 ай бұрын
Load it up and take it to your local bike night gathering 😎
@dereksgarage18564 ай бұрын
Trying to take this thing to any area where there would be a bike Meetup would probably end of me getting ran over
@laser69beam5 ай бұрын
The problem with the gear mesh on those is that the chassis is too flexible, you can adjust the mesh by pulling back on the top of the rear shock tower ;))) still got mine, also still have the Nitro Street with the old traxxas engine. Havent ran in decades, but fun as heck machines. I e always wanted to try one with a steering gyro. PS omg apologies for the horrible spelling I just noticed 🫶
@dereksgarage18565 ай бұрын
Im getting ready to make my next video on this. I put some off road wheels on it and took it in the back yard and snapped another axle. Old plastic don't like me I guess.
@laser69beam5 ай бұрын
As for tuning the small guys, keep the low leaner and the top rich. Adjust the idle stop lower, do t try to bring the idle down with just the low speed by richening it. Rich idle is less stable and prone to stall. Take the filter off, lower the idle gap for more control. Make sure you see good puffs of smoke on throttle blips. No filter helps visually confirm whether the gap is already minimal or could be reduced, tune to a stablest idle at the lowest gap (opening) 🔥👍
@dereksgarage18565 ай бұрын
It really dose need a tune just always seems to be something getting in the way 😁.
@laser69beam5 ай бұрын
@@dereksgarage1856 I know the pain ;) those things are not perfect but what is…? 👍
@dereksgarage18565 ай бұрын
@laser69beam my wife!😄
@suchenderw98905 ай бұрын
nice
@dereksgarage18565 ай бұрын
If you all like the video , please leave a comment , like ,subscribe . almost to 500 subscribers!🎉 LET'S GOOOOOOO
@jackofalltrades83945 ай бұрын
Awesome job man👍 i think the rock crawler suspension with the inner springs would work for your front forks? (Like what you have on the rear) They'd definitely look the part! But with working front forks wheelies might be in your future for sure a little bit of droop and travel you might be designing wheelie bars too. Keep it up man 👍👍👍
@dereksgarage18565 ай бұрын
Oh it wheelies it just needs a wheelie bar if I wanted to ride them out
@williamquick61535 ай бұрын
I'm not gunna lie....that's pretty bada$$. Sucks it flips over so much but there aren't many rc's that don't flip over. And I mean, come on its a three wheeler, that's just what they do. 😅
@dereksgarage18565 ай бұрын
After I lowered the rear and removed the weights its much more predictable. Some thing else that will help is making my own front forks . no front end suspension makes it really bumpy upfront. Which can throw the trike over