TAKU.2X

Пікірлер

@kaidenn 2 күн бұрын

I did the same thing

@shivasniKrishna 4 күн бұрын

That must have smell good.

$@nebilgueffrache2859$

@nebilgueffrache2859 4 күн бұрын

Nabeil ⭐⭐⭐⭐⭐👮👌👍🚘💸💸💸💸🍰☕🍰☕🍰✍️☝️🇹🇳🇹🇳🇹🇳🇹🇳💙👰 7:26 7:27

@StevenJozat-xp2be 25 күн бұрын

gatta call ya the jaguar boy ye sir

@StevenJozat-xp2be 25 күн бұрын

and the kid runs lol he had ti lol

@davcuts2897 Ай бұрын

Nice car. I love my 24 Cooper S. They are a lot more reliable now than they where in the past.

@s2000. 2 ай бұрын

My dream also rn. Just need to find a clean one with good spec, the base soundsystem was terrible on the one i drove.

@Exotic_St4rxxx 2 ай бұрын

🔥🔥🔥 that’s lit bro congrats I’m also eyeing on a mini myself they are great cars

@StevenJozat-xp2be 2 ай бұрын

Mini Cooper S turbo? be sure to use Good oil, warm it up slow before hitting the gas hard, let it idle for a while to cool the turbocharger gradually after a spirited drive, - Your turbo will thank you. has the speed, but don't be a hero.

@LifeWithEmin 2 ай бұрын

Yessir Bro Im soon to join you lol on these good financial decisions lmao but ima do it as a project drift car for my yt channel i wish you luck on this journey bro

@jpadicecoffee9812 2 ай бұрын

what's the plan on fixing\modding the XJR?

@kylepatton2423 2 ай бұрын

Put an S52 in there or get rid of it.

@cryptojosh369 2 ай бұрын

bro just buy m54b30 motor 1k Canadian and manual trans zf 5 speed for 1200 slap it in list it for 6-7k 3k all in 3k profit (cad whatever the exchange rate is for you)

@robsweekendgarage 3 ай бұрын

Is that a coyote or a deer? Guess we know who was smoking what 😂😂 So next time just unbolt the ac compressor and there is enough slack to drape the condenser over the fender. No need to open the ac system. Power steering cooler can also lay across the other fender without disconnecting.

@joshdevdoss9041 3 ай бұрын

There's a guy called "M539 Restoratations" He specializes in restoring BMWs and has a lot of information about torque specs and engine work. I'd recommend checking him out if you are planning to rebuild that engine,

@joegoh1968 3 ай бұрын

Great car to rebuild.

@kelpodelpog5395 3 ай бұрын

My guy simply checking the oil before you buy could’ve avoided this

@ccpm8049 3 ай бұрын

Plugs/ injectors/ thats the place to start. Then could be tune, timing etc

@SHORTABRAIN 3 ай бұрын

Fresh plugs

@eurohouse8788 3 ай бұрын

Come on bro. Pull the head and get the head resurfaced, replace the valve stem seals, check the block deck, install new head gasket with new bolts! Replace any other parts while there such as water pump, thermostat, hoses, gaskets etc. It's not hard

@TAKU.2X 3 ай бұрын

I understand where you’re coming from but most likely the head bolt threads have been pulled and it’s not advised to rethread thread bolts due to it being aluminum. I’m just looking at worst case scenario and what would be much more easier. Junkyard lengine has a warranty as well.

@eurohouse8788 3 ай бұрын

@@TAKU.2X I’ve revived tons of these engines that were overheated and they have all been okay. And your engine may or may not have been overheated

@robsweekendgarage 3 ай бұрын

And go thru all that, just to strip the threads out of the block on final torque. Replacement engine is $800 or so. Couple hundo for maintenance items and you’re good.

@eurohouse8788 3 ай бұрын

@@robsweekendgarage you’re a rookie and have probably never touched a BMW engine before 😀😀

@05Elantra98GSGang 2 ай бұрын

@@eurohouse8788facts he is in school still learning so I’m sure he has asked his teacher idk why his teacher didn’t just recommend exactly what you said bc it’s the cheaper option and it’ll be better long term

@sclogse1 3 ай бұрын

Transmission. Labor gonna jack you.

@deandremitchell6790 3 ай бұрын

Take it from a E46 owner here, if you plan on just replacing the head gasket before you disassemble the engine re-torque the head bolts (this is to check to see if the threads in the block get pulled out since the engine is also aluminum). If the bolts don't get loose tightening them then you are fine with just doing the head gasket, but if they do get loose then the block is no good and just better off replacing the engine. With the M54s in the e46 with the block being aluminum when they overheat the material gets soft and ends up pulling the threads out of the block when you tighten the head bolts. It all depends on how long and how hot the previous owner let the engine get before the head gasket finally failed. Hope this little bit of info helps with your decision

@TAKU.2X 3 ай бұрын

Thank you very much. I was actually doing research about that so I’ve decided just to put new engine in it just to save myself the hassle of that potentially happening thanks!

@uselessDM 3 ай бұрын

You didn't have to put blown head gasket in the title when talking about a BMW. It's redundant.

@Jonathan-xj4pb 3 ай бұрын

please restore it, it will be worth it 100%

@TAKU.2X 3 ай бұрын

Yes! More videos on the way

@nonstopbg 3 ай бұрын

All I see is just a BMW making BMW noises. Seems pretty normal to me. All that's missing is the redneck behind the wheel.

@Abilich822 3 ай бұрын

How can you be disappointed after buying one of the most unreliable, expensive to fix beamer there is in existence??

@deandremitchell6790 3 ай бұрын

They're not unreliable, just owner's don't know how to maintain the car properly. You can't let any of the bmw cooling systems get neglected or you'll be in this situation. BMW cooling system is the down fall of the car, most people think it's like a Japanese or American car to if it gets hot and continue to drive it'll be fine but it will not be.

@brandonisfat6775 3 ай бұрын

@@deandremitchell6790my 323i survived cracked heater hoses 👌

@dexietyy7922 3 ай бұрын

M54 unreliable are you mad? Most reliable petrol bmw engine made in existence along with the M52 😂 mines on 261k and still runs flawlessly

@robsweekendgarage 3 ай бұрын

The worst thing about an old bmw is its previous owners

@05Elantra98GSGang 2 ай бұрын

@@deandremitchell6790no they absolutely are unreliable my uncle bought a 323 in 2000 and had the car until 2016 drove it 175k miles he put almost $60k in dealer repairs into it over the life span of owning it that is extremely unreliable in my book where as my family friend put only a few thousand into their 1998 Lexus GS300 with the inline 6 3.0l 2jz through its whole life span until I bought it in January this year an they owned it 10 more years than my uncle owned his 323

@BittaThisBittaThat 3 ай бұрын

Bros the king of yappin, jeez

@arathsalgado1904 3 ай бұрын

Like why’d you buy it for lmaoo

@deandremitchell6790 3 ай бұрын

@@arathsalgado1904He thought it was a good deal, but cheap German cars are never a good deal really. There maybe that one out there but most of the time not really. Sometimes is worth it if you specialize in that brand or vehicle and REALLY know the problems those certain cars have and know what your getting into

@Miyamoto-Rain 3 ай бұрын

This me with my 1995 toyota Celica gt. Legit bought it for $550 with my first pay check after spotting it on Craigslist. Legit never drove a trailer before but hooked one up, drove 1 hour to CT, brought it home, couldn’t get it off the trailer so paid 150 bucks to a tow company to yank it off cause it’s got 2 seized brakes, needed a new starter, and had been sitting for 8 year. Just gutted the interior today to do clean up of the mold and get it looking smexy. Do i have the money to insure the car? Nope. But it was worth it.

@TAKU.2X 3 ай бұрын

Does it run and drive?

@awesomegamerman2452 3 ай бұрын

its probably worth more in parts than that, so you could part it out if its unsalvageable

@TAKU.2X 3 ай бұрын

For sure thanks !

@ChicagoItalian 3 ай бұрын

I had a heavily modified 1998 XJR8. Upper and Underdrive Supercharger pulley, large Intercooler up front, larger faster water pump and a carbon BMC filter and aluminum intake tube. You might be losing power as your intake is sucking in the warm air from the engine…..beautiful car.

@TAKU.2X 3 ай бұрын

Oh wow that’s nice 👌🏾. Yea I’m planing on purchasing a Mina Galaxy intake soon. Stay tuned.

@ChicagoItalian 3 ай бұрын

@@TAKU.2XHave you changed out your plastic tensioners for metal ones? Also, be careful with your transmission, they fail, as mine failed.

@TAKU.2X 3 ай бұрын

@@ChicagoItalian previous owner did the tensioners luckily. Actually recently did a transmission service I don’t drive it too hard lol

@ChicagoItalian 3 ай бұрын

@@TAKU.2X ok good…you might also want to change out the supercharger oil as well. You can go to a GM dealership and get it there.

@StevenJozat-xp2be 3 ай бұрын

Ең жақсы KZbin

Пікірлер