The CMOS in an actual line film scanner is much better. The software can take out scratches and dust by IR, balance color for the type of film, restore faded color, and minimize grain. Just scanning is the least amount of time. The post-processing is where the time is.

Can you share the STL files so I can print one of the adapters?

what was your download speed with windscribe running on the pi?

I will definitely use it for penetrating wrecks. Can also use it as a spare secondary light.

Definitely for crayfish spotting

Thank you so much for sharing this video. I am about to try to fix my old sewing machine with the same problem, feed dog gear broken. Do you know if I can find online the appropriate gear for my Singer Starlet 495? It is a very old model and the local shop doesn't have it on its records to order the appropriate part. It would be good to know if I can still find the spare parts. Thank you so much

Thank you so much for posting this. I have a Singer 502 and the feed dog gear had sheared in the same way as the one in the video. My usual repair shop is shut due to covid so I ordered the parts and followed your instructions. My 2 horizontal axles were a little stiff/unco-operative and the 502 power block has an additonal wire so it doesn't pop out of the way as neatly as the one in the video. Other than that, I was able to easily follow your lovely clear instructions, helped by your very useful close-ups showing exactly what you were doing. I found sorting the timing of the feed dogs/needle a little tricky, but kzbin.info/www/bejne/hZa0g4eaq9mAesk suplemented the helpful information in your video and I got it sorted out. I was then caught out by the bobin hook timing. Undoing the bobin gear at the end of the long horizontal axle and messing about with the feed dogs timing had thrown things out slightly. This meant that the needle now caught on the plate under the bobin holder, as the hook moves round. Although it's a video for a different sewing machne model, kzbin.info/www/bejne/rWmngquphL-co7s showed me what was happening and gave me the pointers I needed to fix it. I undid the grub screws for the drive belt, feed gears and bobin gear on the horizontal axles. I aligned both the feed dogs and the needle and tightened the feed dog gear grub screws. I fixed the alignment of the needle and the bobin hook so that timing would be correct by moving the needle into place and adjusting the bobin hook into the correct alignment before tightening the bobin gear and drive belt grub screws. Once everything was tightened up, I gave the whole machine a clean/dust and oil before reassembling and to my suprise, it works fine. I am delighted! Thank you so much for your video. (I didn't replace the bobin gears as they're fine but, thanks to you, I now know how to do these when they need doing and you've given me the confidence to know it's something I can do myself.)

thank you very much for your video, it was very helpful, I have the exact same machine, but I couldn't take one of the gears off... I sent you an email with a picture and a video, I hope you can see it soon.

Thanks for sharing, I've just picked up a Singer 437 with broken drive gears, similar set-up to your machine but different things need removed to slide out the shaft that is driven by the belt. Just a quick question, when you replaced the 2 bevel gears did you need to reset them to correct the bobbin hook/needle synchronisation?

this is outdated I think

Nice work

Great video❕Hope u visit Sipadan Island for amazing diving experience.✌①♥

You need to have windscribe pro feature to do this.

Hey guys I need some help. I use the Xenyx X1204usbfx for live djing and Karaoke. Here is my issue. I use the Phones/Control room output for my booth monitor. For some reason if I use an effect on any channel, (mainly mic delay fx for singers) I cant here the effect through my Phones/Control Room Monitor output. The Main outputs work fine. Effects and all. I can hear everything except the effects. I could use the tape output but theres no control over the volume. Ive tried everything. Mono/Stereo plugs, Main mix button pressed others off and visa versa. Any help would be great. Thanks

Very well done. Clean, concise, to the point with loads of information that was presented well.

Very good. Thanks, mate.

Great simple but comprehensive overview of how to use this desk. Thanks.

Did you make or did you buy the outrigger mount for the BCD. What’s it made out of?

please i need help on my mixer.

option 2 not at all steramlined

Amazingly clear and helpful. We use this mixer currently for live performances, but will also use it for simple recording mixes and thanks to your explanations much better monitoring for on stage fold backs or in-ears.

Damn! You know your mixer. Thank you. Now my feedback problems are gone. Woo hoo!

Excellent tutorial. I use this with my students.

Finally someone managed to explain me how to set up a mixer. Thanks, mate!!

THANKS BRO

very nice video

nice vid mate

Thanks!😊

Will I be able to record with this in garageband?

under surface stuff are welcome. Cool.

Mate, that is just what I've been looking for, thanks. 11/10

Great information about mixers! Thanks.

Hi I am new to using this mixer. Is Aux 1 a stereo. I am not sure about the Aux return. The Alt 3 & 4 are they Left and Right? Or is each stereo?

Got a GX200tb that I'd love to try that on! (She screeches quite a bit). Thx for the tip!

Thank you so much for your excellent video. Your instructions are clear and the demonstration for every knob and button is just awesome Keep on with your videos! Cheers!!

This was truly informative and very well produced, thank you!

nice video

Thank you so much for really detailed but concise presentation. I hope Behringer will use your presentation as an official demonstration of the unit. I was using this for years, but today, I understood every bit of the operation. Grate, keep it up your good work. Eng. Chandana Dalugoda

Any suggestion as to why all of the sudden my main mix/ VU meter stopped working even if I am getting power to the unit?

Which one is better for karaoke recording at home and occassional karaoke parties? QX1222USB or QX1204? I don't need too many inputs, but I'd like to be able to record the performances too, PREFERABLY, with live voices affected by EFX processor, but the final mix signal sent to the computer without effects.

Great video man loads of info

This is great. Where'd you get the extension for the saw table?

Hi, does anyone know is it possible to record vocals where there effects recorded too. I mean what you hear in headphones the same sound is recorded?

hi there i wonder if you could help me .. should i be able to hear the effects through the headphones when using mic 1 channel 1 and the controlls both at 12 any help gratefully accepted as i think my unit is faulty and need to return it as its new ..thanks

Hi how can I use the effects in DAW for live performances as q1204 doesn’t have inbuilt effects .. thanks

Szar

Too much information at one time. Think of beginners! I began to get a headache! What about basics - like connection to speakers. Is this a powered mixer?

Excellent explanation that I can easily transfer to my desk. Thanks.

I have same Behringer mixer and your video was a grate lesson. Please keep up your grate work. Many Thanks.

If only the people using these actually understood all this - there are far too many crap sounding gigs these days.