Where is best place to get parts for Kabolite k963 parts . Are any parts store in USA? Thank you. Ken
@RCconstructionJP3 күн бұрын
There are no parts in the US unless you find someone selling them on Ebay.com. If you send a message to www.toucanhobby.com/ they will probably get you what you need.
@carltontweedle57246 күн бұрын
Was the filter dirty or blocked because, I work on the big stuff. Oil gets changed when it needs to be changed. As with the filters but we test the oil if it comes back fine back in.
@RCconstructionJP6 күн бұрын
The filter didn't look dirty. However, if it was it would be a major undertaking to remove it and clean it. The whole hydraulic assembly would have to come out.
@artagain89777 күн бұрын
Time and time again the Chinese retailers claim they have quality products and everything is tested constantly. Yet, he is another example of poor quality and building. Glued a speaker onto a fan??
Hey.. Can you show the quickcoupler and change to a nother bucket? Greetings
@RCconstructionJP12 күн бұрын
Currently I only have one bucket, but I have another one being delivered. I should have it and will make a video in a couple weeks when it arrives.
@Albert-cf9hx12 күн бұрын
@@RCconstructionJP thank you 🤝🏻
@MicaseHD13 күн бұрын
What battery are you using? and how long is the run time?
@RCconstructionJP12 күн бұрын
3S battery, it's size is about 136*43*29mm (5.35" x 1.69" x 1.41"). They last 25 minutes. I purchased four extra ones from Amazon so I don't have to wait for them to charge. Also, with the charger that came with the machine the charge time is close to 9 hours. I use a different charger and the charge time is 70 minutes at a 5A rate. kzbin.info/www/bejne/eGTJoXd_rZ5rfq8
@Vito20ve13 күн бұрын
This is wild
@DVS53514 күн бұрын
It is, but too much play on the slewbearing.
@boreyrc82914 күн бұрын
Wow I like excavator how much brother ❤
@RCconstructionJP9 күн бұрын
$3,700 approximately
@boreyrc8299 күн бұрын
@@RCconstructionJP like this ❤️
@RCconstructionJP9 күн бұрын
@@boreyrc829 $3,700
@artagain897714 күн бұрын
You need a dump truck Jerome ;)
@RCconstructionJP14 күн бұрын
I had one from Huina. I sold it because I never really used it. I probably would use one if I have a very big area to play in.
@SavageX12514 күн бұрын
How has the machine been reliability wise? I want to buy one but keep hearing very mixed reviews some say do not buy some say I should have bought one yesterday. Opinion?
@RCconstructionJP14 күн бұрын
This has been a very reliable machine. I've had Huina and Double D Volvo excavators and they broke all the time. They also had much less power so I was always trying to modify them to dig better. The Kabolite K961 is very reliable. I've had it 9 months and it only had one or two minor issues.
@thd567815 күн бұрын
Thank you very much! That was what i was looking for!
@RRCCONSTRUCTIONMININGREC-tl8yf16 күн бұрын
They are awesome diggers big like my Friend.😊😊👍👍❤❤❤
@artagain897716 күн бұрын
Didn’t you recently get this Jerome? How many hours do you think you have on it?
@RCconstructionJP15 күн бұрын
I had 5 hours on it! I know a lot of oil tanks are dirty when they are manufactured and they don't get cleaned. I wanted to change the oil when I got it but the quick connect wasn't delivered until yesterday.
@RRCCONSTRUCTIONMININGREC-tl8yf16 күн бұрын
Very Nice new sub thanks for sharing my Friend.😊😊👍👍🚜🚛🚚🛻🚙🚧🚧🚧🚧
@artagain897716 күн бұрын
Thanks for sharing Jerome.
@whaylay108916 күн бұрын
I want one!
@DarkVoidIII16 күн бұрын
It might be small but it sure beats digging and moving it all with a shovel! 😁👍
@artagain897716 күн бұрын
Just subscribed as well.
@artagain897716 күн бұрын
Congrats. I have the Lesu CAT 335 (ET 35). I think I’ve seen you commenting on some of the RC FB pages.
@mrcheeso879616 күн бұрын
how much does that excavator cost?
@RCconstructionJP16 күн бұрын
Approximately $3,600
@ahayy174817 күн бұрын
Price?
@RCconstructionJP16 күн бұрын
$3,700 approximately
@Joe85IBMOR17 күн бұрын
Love this model nice to see it working
@thd567817 күн бұрын
Awesome model. Can you show it with the boom and bucket curled up? Like it is in the box but with the bucket curled (scooped) all the way. Thank you.
@RCconstructionJP16 күн бұрын
Yes I can
@RCconstructionJP16 күн бұрын
I uploaded a video kzbin.info/www/bejne/hmeUcoOIjbmBbac
@will400r17 күн бұрын
I need this for the deck up at my cabin in the winter.
@CLAUDIOSRC952917 күн бұрын
@RcAjae18 күн бұрын
멋진 장비네요.파워가 좋아보입니다.
@tony5247mittens19 күн бұрын
We're did you buy the metal syringe I need one to fill hyd tanks on my dozer and track hoe's
It's 1/10 scale that machine. Kaboilte never get there scale to actual scale mate 😂. It would tower over a Tamiya truck id never buy there crap
@user-ej4vy6yw5sАй бұрын
حفاره لعبة جميل تاخذ الراحه
@RussellHawkins-TRUАй бұрын
Hey JP my name is Russell and I have a kabolite K336GC and K966 I have been making the switch to lesu let me know if you are interested
@RCconstructionJPАй бұрын
Hey Russell. I have a Lesu SK500LC on order. It won't be here for another two months. I'll start posting videos when it arrives. I'm not looking to purchase anything else at this time.
@CharlesZweckАй бұрын
so is that scale you buy is 114
@CharlesZweckАй бұрын
isnt the 114 scale bigger than 118 scale
@CharlesZweckАй бұрын
not really sure 114 scale is one just asking questions to maybe figure it out
@RCconstructionJP22 күн бұрын
1:14 is bigger than 1:18. The 1:18 works better in the sandbox on my porch.
@CharlesZweckАй бұрын
so is that scale you run 114 scale i think that would be scale for me price that i seen for them isnt to bad price
@RCconstructionJPАй бұрын
Yes, I started with 1:14 scale Huina excavators. They are not as powerful, but they are less expensive for you to figure out if this is a hobby you want to stick with.
@CharlesZweckАй бұрын
what scale rc do you prefer in this type of rc
@RCconstructionJP22 күн бұрын
I like the 1:18 or 1:16 size of the Kabolite.
@CharlesZweckАй бұрын
what scale do you have in rc what scale are these
@RCconstructionJPАй бұрын
The most common is 1:14 scale. If you get bigger than that they start to weigh over 100 pounds. My excavator is 1:18 scale and the loader is 1:14 scale. They each weigh 20 pounds.
@hoverhead047Ай бұрын
Think I would have put some grease back in that gearbox though.
@RCconstructionJPАй бұрын
You're right. I thought about that once I started digging again.
@Excavator700Ай бұрын
Create
@Maikel1500Ай бұрын
Nice, looks like it best preforms on the sand. Cation with the salt water, the sand could also contain some still.
@bobosmith20462 ай бұрын
thank you now I know what to do have a great day
@janines43142 ай бұрын
Very nice
@DiggingDirtRC2 ай бұрын
Glad you’ve got it sorted out. The k963 is my favorite. Hydraulics suck, I work on them in real life. And they suck even worse at a 1/16 scale 😂
@Maikel15002 ай бұрын
Cool, I was curious how it looked inside. Thank you for sharing your experience and show us the solution.
@user-ob3kn6lk6b2 ай бұрын
Waste of money. Scam
@Aussiem8e2 ай бұрын
Kabolite would sell more if they made them a little bit bigger, 1/14 scale. To match tamiya truck's.
@RCconstructionJP2 ай бұрын
I sometimes wish they had smaller ones. That way my indoor play area would be much bigger in scale.
@Aussiem8e2 ай бұрын
Have you got a tamiya truck to put it next to for scale?
@RCconstructionJP2 ай бұрын
@@Aussiem8e No I don't.
@Maikel15002 ай бұрын
Hey Jerome, I been watching your videos, I like to see these models do their thing. Your videos are to the point and I appreciate that. I would like to see the tracked load in action in the garden to see how it behaves with more compacted ground. I would like to hear / see more of your experience.
@RCconstructionJP2 ай бұрын
Hey Maikel thanks for watching. All of my digging at home is in the sandbox on my porch. However, I'm creating a spot outside at my girlfriends house and will record some videos near the end of the month.
@Maikel15002 ай бұрын
Ah, I see, well I will be looking out to the new videos than.
@RCconstructionJP2 ай бұрын
@Maikel1500, I posted 7 videos today.
@Maikel15002 ай бұрын
@@RCconstructionJP I saw the first one drop, great I am looking forward to them and the next.
@trevorrigo95172 ай бұрын
what did you plug the blue hydraulics sounds wire into?
@RCconstructionJP2 ай бұрын
I connected it in line with the hydraulic pump on Ch5
@trevorrigo95172 ай бұрын
@@RCconstructionJP exactly what i did. figured can i skip the mixing if i just hook it to the pump channel? worked great. thanks!
@trevorrigo95173 ай бұрын
Awesome idea. Are the pin points the same of the k966 model? I am wondering for 3d printing if the dimensions are the same for the k963 and the k966. Thanks!
@RCconstructionJP3 ай бұрын
I'm not sure. I've never seen the K966. I know the tracks on the K966 are bigger.