Got rid of mine early on for the oring and clip reasons… For the price it should be ALOT better ..
@TheBigCanuckerКүн бұрын
No doubt, but I used the Phillips today and it was handy. I do t think this is going to be a super long term pry for me, but I want to try it in a pocket slip before I give my final judgement.
@CNYKnifeNutКүн бұрын
13:00 - Putting it in raw; bangin' around... You Canadians are wild!
@TheBigCanuckerКүн бұрын
lol That we are sir.
@Thomas-dz4eg3 күн бұрын
Bought my Rambo knife from Consumers Distributing for $10 when l was a teenager. It looked pretty cool until you had to actually use that piece of garbage. Only own two fixed blade knives. The mrs bought me a Buck 119 Special in 1989. It’s a great easy to sharpen camping knife but, its too heavy to carry. Was constantly having to pull up my pants and tighten my belt! Brought my first new fixed blade a few months ago. Picked up a North Arm Bird and Trout knife. l’m very happy with it :)
@TheBigCanucker3 күн бұрын
lol I think we all wanted that Rambo Knife Lol. Yes I’ve always wanted a 119, but I think it’s mostly nostalgia lol. Take care sir.
@singingtoad4 күн бұрын
I think that's a really cool knife and thanks for sharing! 😎👍Take care my friend and Cheers!
@TheBigCanucker4 күн бұрын
Thanks brother and you take care too.
@mfridmanyt5 күн бұрын
sheesh I need subtitles for some of this LOL
@simonstokes3696 күн бұрын
Small is good.
@stevepiazza87705 күн бұрын
That's not what she said.
@Thomas-dz4eg8 күн бұрын
CRKT can make a good knife, when they want too!
@TheBigCanucker8 күн бұрын
Yes they can, but they can also make some terrible knives as well. lol.
@Thomas-dz4eg8 күн бұрын
A little too to big for my pocket. Getting in/out of my pocket would be difficult too!
@TheBigCanucker8 күн бұрын
Which Is Part of the reason it got sold today lol.
@ar007r12 күн бұрын
Not sure what you are talking about. The leather strop is for honing. Leather is by far the best material to sharpen edc knives and put a very fine edge on a knife. You dont use compound if it is very expensive high grade material. The higher the grit the more it takes off. Leather is for making it razer sharp. Obvioulsy you cant use leather to make a completely new edge on a knife. And yes you can use that setup to sharpen knives. Most people free hand it.
@Thomas-dz4eg15 күн бұрын
l have the Ken Onion Worksharp. You have to be really careful or you will damage your knife. l only use it on my kitchen knives
@TheBigCanucker15 күн бұрын
@@Thomas-dz4eg Yes sometimes you need too be careful especially with the belt sharpening systems cause they can get away quickly. This one isn’t as quick to ruin an edge, but it can sure mark up a side in a hurry if you get careless. Practise makes perfect….take care.
@TheBigCanucker15 күн бұрын
@@Thomas-dz4eg yup for sure these electric sharpeners can mark up a blade pretty quickly, but this one isn’t as powerful and is a bit more forgiving. Take care.
@CanadianCuttingEdge15 күн бұрын
Certainly better than carbide pull-through sharpeners. Seems like it is a decent choice for a regular joe, but probably a poor choice as a primary knife sharpening choice for a knife nerd. Lately, I've not been careful enough resulting in cutting and stabbing myself too. Thankfully very minor in the grand scheme of things.
@TheBigCanucker15 күн бұрын
@@CanadianCuttingEdge You are exactly right and that was what I was trying to say, just not as good lol. I hope you’re doing well my friend.
@Thomas-dz4eg17 күн бұрын
Very nice!!
@TheBigCanucker17 күн бұрын
Thanks man!
@eltonwinkel53217 күн бұрын
A microtechs on the “list “ At some point . Have fun with it !
@TheBigCanucker17 күн бұрын
@@eltonwinkel532 It’s damn fun and a beast.
@CanadianCuttingEdge22 күн бұрын
Good stuff brother! That drop point recurve is probably my favourite EDC blade shape on there, and yours also has my favourite stonewash finish. I rarely get down to Fort Macleod, but I will check Alberta Firearms out someday. Thanks for that top coat tip for the drivers.
@TheBigCanucker22 күн бұрын
Thanks for watching my friend and I’m so glad to see you back bro, by the way just got the new Worksharp top line sharpener and it’s awesome buddy.
@mojavedesertsonorandesert953123 күн бұрын
Hard pass Openals knives.. have a couple- not for me... Too many better options..
@TheBigCanucker23 күн бұрын
Yes there are so many options, but some people still like their knives cheap and simple. Take care sir.
@blueclothes124 күн бұрын
Beautiful knife big guy! 👍
@TheBigCanucker24 күн бұрын
Thanks so much man, look for it to be on sale soon lol.
@Thomas-dz4eg24 күн бұрын
l scored a great deal on a CF 90CV Mini Crooked River from BC for only $289 two years ago. I would like the full size Crooked River but, dam they have gotten expensive!! Oh sad news. Adam has shut down CKC. The Sleeper is now history :(. I spoke with Adam and he got nailed by 3x by CBS for customs and storage fees. Hopefully, he got most of his cost back :(.
@TheBigCanucker24 күн бұрын
That’s too bad, I hope he at least broke even. Sometimes our laws just don’t make sense. Yes they are both great knives. I always felt a lot of Benchmades were too light and felt flimsy, but the full size Crooked River isn’t flimsy. Take care man.
@blueclothes126 күн бұрын
👍👍
@eltonwinkel53229 күн бұрын
Great blade shape.. And the fact that it has a pocket clip .. Peaks my intrest.. Ill have to keep my eyes open for one . Great review !
@TheBigCanucker29 күн бұрын
Thanks very much I appreciate it, this one is going up for sale today On CKG a Facebook knife and gear group or if you want email me. I like the knife a lot, but I need to see keep the collection fluid until I win the lottery lol.
@eltonwinkel53229 күн бұрын
@@TheBigCanucker I ll keep an eye out for it .. Never know ..
@Thomas-dz4eg29 күн бұрын
My niece is a teacher in Brandon Manitoba! Very nice Knife.
@TheBigCanucker29 күн бұрын
@@Thomas-dz4eg Thanks man. Yes Brandon is a great town. It’s very similar to Lethbridge. Yes it’s a great knife.
@randomescuАй бұрын
I have the black version and i flickers when i dim it inside the case. I have to step in the normal way it up to stop that. But its not a huge problem, i mostly use it between medoim and high.
@TheBigCanuckerАй бұрын
Try calling Olights support line. I’ve heard they have a great warranty department. Let me know what happens and if they help you out.
@Thomas-dz4egАй бұрын
Olights customer service were great to deal with. The tail cap went on my Titanium i5R. Used the warranty link, sent them a video of the problem and they will replace the product. The problem l had was that they did not have any Titanium flash lights left so, they offered me the new Carbon Fibre model instead. Then l found an online hack to fix my Ti tail cap and it worked!!! Now l have two i5Rs.
@TheBigCanuckerАй бұрын
Nice I love it when companies I like have good warranty. It always makes me feel better about a purchase.
@LovingIdahoАй бұрын
The 110 is one of my favorite knives . When i was growing up , every hunter or fisherman carried a buck 110 . I have broke a lot of lockbacks in my day (50 plus years of use ) but never had the lockback break on a 110 . i have my father’s 110 and my grandfather’s 110 . They last forever . 110 is available in many steels. I have them in 440, 420,s30v, s35vn, s45vn, 5160,d2 and more
@TheBigCanuckerАй бұрын
Yes when I was a kid the Buck 110 or Buck 119 were The God Blades to have lol.
@Thomas-dz4egАй бұрын
Replaceable blade work knives are very popular where l work. l have a few customers who have no interest in sharpening their knives and like being able to just replace the edge. Mind you, they are a bunch of old guys who would never spend the money on a Reate! The same guys will spend lots of money on a fine firearm but, won’t spend more than $50 on a knife lol
@TheBigCanuckerАй бұрын
I used to be one of them...lol. I remember my first spyderco and I figured the $80 I spent was way out of the ballpark....Those were the days..lol.
@Thomas-dz4egАй бұрын
@@TheBigCanuckerl think a lot of use to be that way lol. l carried a swiss army knife in a leather sheath my entire life. That first assisted Gerber cost me $50 and it was junk! These days, l only sell those $50 China Bucks. And to be honest, it’s all most people need. But the knife snob in me would never buy one lol.
@Thomas-dz4egАй бұрын
Yes!!! Good to see ya again :) Like my Mini-Crooked River lol. Its full size knife too! Nothing mini about it.
@TheBigCanuckerАй бұрын
Thanks so much, by the way I’ve got a full size and mini crooked river to review soon.
@Thomas-dz4egАй бұрын
They are nice knives. The mini is one of my favourite edc knives. l like the WE Kitefin
@gizmocarr3093Ай бұрын
Good to see you again.👍
@TheBigCanuckerАй бұрын
Thanks my friend.
@chuckschillingvideosАй бұрын
First thing I do with any pocket knife I buy is remove the clip. As far as I'm concerned, this is the only folding knife would ever need.
@TheBigCanuckerАй бұрын
@@chuckschillingvideos It’s a great knife and I just put it up for sale if you’re interested $125 CAD shipped and $130 CAD shipped if it’s going to the US.
@bevshaw94Ай бұрын
Why staples instead of stitches
@TheBigCanuckerАй бұрын
@@bevshaw94 I’m not entirely sure, but I think it was to train the other new Dr and I wasn’t too worried and how the scar looked and I also think they are pretty simple to remove as he gave me the removal tool to take home to remove them.
@1TruePatriotАй бұрын
Stop beating around the fucking bush! And your lighting is so inadequate that we can't see the inside of the pouch. Less jabber and more thought/light/planning, please.
@thefightdoctor1257Ай бұрын
Only in southern Alberta.
@TheBigCanuckerАй бұрын
Lol yup.
@CSGravesАй бұрын
I was gonna say, I wouldn't be surprised to see a similar scene in the north end of Saint John, but then again, we can't afford the apples. 😄
@beeble2003Ай бұрын
Those aren't wind chimes. It's the sound his antlers make.
@TheBigCanuckerАй бұрын
Lol 🦌
@gizmocarr3093Ай бұрын
Thanks for sharing that video.👍🦌
@TheBigCanuckerАй бұрын
Your welcome my friend, Lol that damn deer is like a puppy dog.
@Thomas-dz4egАй бұрын
lt’s not really a good idea to make Deer associate food with direct human contact. It will loose its fear of humans. Not a good thing for the Deer during hunting season.
@TheBigCanuckerАй бұрын
@@Thomas-dz4eg Normally I would agree with you, but there are a group of deer who pretty much reside in the city and I think this one has been back 3 years in a row and hangs out all summer.
@annettttАй бұрын
Just ordered one in akron ohio, thank you my Canadian brother
@TheBigCanuckerАй бұрын
You are so welcome my friend. Enjoy
@emcehaАй бұрын
If you are doing any kind of a professional tradesman, Surge is the king. It is super easy to modify or create own bits and blades for tshank.. Normal bits can be grinded down to thickness to vreate your own bits. To not waste space, its easy to add flat on the hidden part of the bit.
@TheBigCanuckerАй бұрын
Bingo.
@MattRWilson2 ай бұрын
Beauty build pal. You've sold me on the nub delete and choil. That's a good call on polishing up the detent track with the dremel!
@TheBigCanucker2 ай бұрын
Thanks man I appreciate the props sir. Take care.
@rosedale482 ай бұрын
Too many useless details
@TheBigCanucker2 ай бұрын
Thanks for the input take care.
@TheBigCanucker2 ай бұрын
Thanks for the input take care.
@CosmicJhana4442 ай бұрын
It’s just gorgeous!!
@TheBigCanucker2 ай бұрын
Yes and eventually I’m going to mirror polish the bolsters.
@CosmicJhana4442 ай бұрын
@@TheBigCanucker I hope you do a video on your Vallotton after you polish the bolsters, so we can see how it looks. That’ll be something!
@Rubes1602 ай бұрын
Just got my Police 4 K390 fully serrated. Man, it is big but I love carrying it and using it whenever I can. I am a Police model addict! After my next used Police 4 G10 K390 arrives, I will have a total of 4 Police models! Cheers from Minnesota.
@TheBigCanucker2 ай бұрын
Nice collection of pocket swords. If you ever want to try something a bit different try out the Native Chief it’s also a beast, but a bit more refined. Take care and stay safe.
@Peter-der-gute-vegane-Hirte3 ай бұрын
Beautiful woman
@TheBigCanucker3 ай бұрын
Thank you kindly
@jimoneill76573 ай бұрын
My girlfriend insist that spit is the best lube.
@TheBigCanucker3 ай бұрын
Lol
@billjohnson79043 ай бұрын
added water, and then slightly tilted the knife to the side, while running it through. Did it about 15x, knife was way sharper.
@TheBigCanucker3 ай бұрын
Cool I’ll have to give it a try, but so far any sharpness I’ve gotten from the sharpener has been underwhelming, but never give up lol.
@billjohnson79043 ай бұрын
@@TheBigCanucker I am a total amateur, all I know is after I used it, it cut my veggies easier.
@shamonejohnson94603 ай бұрын
This worked! Thank you so much
@TheBigCanucker3 ай бұрын
Glad it helped!
@TonyRIKKI4 ай бұрын
The fine and the ultra fine feel the same to me, I picked up the ultra fine rods for my sharpmaker, the red dots on the uf rods wore off and now I can't tell which is which now, when I compared the fine bench stone with the uf, they feel the same, when I run something along the stones I'm feeling for which stone feels smoother but again they feel the same.
@TheBigCanucker4 ай бұрын
Weird I know there’s a subtle difference and I can definitely feel a difference in the stones with my finger and with a knife. Just wondering if both are cleaned up, try using a magic eraser and giving them a good clean and see if that helps.
@TheBigCanucker4 ай бұрын
I’m going to have to have a look at my sharpmaker rods and my fine and ultra fine stones and look closer. I’ve sprayed my ultra fine stone with .1 micron diamond spray and it’s gotten shiny now on one side, but I will look on the other and see. By the way that combo was a killer finisher on my knives when I hand sharpened.
@dualsportoutdoors4 ай бұрын
How do you get S30V on a Surge? I've never seen that option
@TheBigCanucker4 ай бұрын
Sorry I don’t have S30 on the Surge, it’s been a bit since I recorded this video, but I think I was mentioning there are some aftermarket S30v blades out there and I would like to get one. I will have to rewatch and see for sure. Take care.
@RuneInternational4 ай бұрын
I was shown this video on my home list after making a video about the same kit. Think you missed the point about how well this will stand up, with the tray folded down, making it a perfect mini worktop with a tool holder wall behind it. I am using mine for residential lock repinning, where I use the tray to not drop dirty parts directly on peoples horizontal spaces
@Kdb2TACTCreighton-ez4dq4 ай бұрын
About 2 weeks ago had a oblique spiral fracture super bad but getting better slowly Ian’s I hope you do to
@mistersmith39864 ай бұрын
No matter what knife I pull out, NOBODY is scared of it where I live. Cause I no longer live in Kommiefornia.
@Allan80804 ай бұрын
Du skal køre frem og tilbage
@TheBigCanucker4 ай бұрын
Jeg har prøvet flere måder, og det kan forbedre en kant, men aldrig nok til at få mig til at føle mig godt tilpas ved at bruge skærperen, men tak så meget for dit input, pas på og vær sikker.
@muxmurki14975 ай бұрын
Hello and Greetings from Germany. I do research for a book on multitools, pocket tools & stuff right now; therefore, I attend the KZbin-University for many great vids. One thing I do agree with you on the spot is: the LM Crunch. Doutbtless the single most capable multitool there ist.
@TheBigCanucker5 ай бұрын
People under estimate it all the time. When your book is published I would love to read it. Take care and stay safe.