@@siriusj7987 delta-force-hawk-ops-cn.en.uptodown.com/android/download

The game is just DESPERATELY optimized. RX480 has support for dx12 and can also work with fsr3. While with this game it is impossible to run it in dx12 or use fsr3 and FG. In my opinion, this is a category of GARBAGE.

Probably because you want to run the game on dx12, which doesn't work. Run it in dx11 and you shouldn't have any problems.

If you haven't looked at the better settings I set in the game, then try again and you'll see that there is no fps limit. From 5:59 it is clear that the problem is in the "crack" itself. As soon as I replaced the other version the fps improved.

@@kaurazmaj even the legit game is so poorly optimized on pc.

On my board, I can't overclock the ram memory higher than 2400 MHz, that seems to be the maximum for my motherboard. My board supports RAM overclocking up to 3100+ MHz. There is a 6-phase power supply on my motherboard. Motherboards with 8 or 12 phase power supply have even better potential for overclocking.

@@kaurazmaj Alright, i got the corsiar vengeance too with a Asus Z87 i try it today

@@AlexanderWagner264 If you know the full name of the motherboard I can see what you can expect.

@@AlexanderWagner264 ASUS Z87-A has an 8-phase voltage section ASUS Z87-Pro has a 12 phase voltage section ASUS Z87-Plus has an 8-phase voltage section ASUS Z87 Maximus VI Hero has an 8-phase voltage section

@@AlexanderWagner264 You can try at 2600 MHz with latencies CL12-14-14-38 and a voltage of 1,700v. For ddr3 memory, it is not recommended to exceed the voltage of 1,650v because you reduce the lifespan of the memory or you will degrade it. But if you are only interested in stability testing, you can try it, although I would not exceed the voltage of 1,650v for 24/7 computer use.

For video recording, I use the AMD recorder, which is in the graphics card driver itself. I don't use an external recorder. I use MSI Afterburner to display component load.

@@kaurazmaj thanks, i see that it works very well. My question was because many people say that only nvidia cards could record and stream in a good way.

@@andresuribe8929 I don't trust anyone until I test and try it myself. We live in a world of LIARS. I usually shoot in 1440p resolution and I set the video bit rate to 60 Mb/s. By increasing the bit rate, you get even better video quality, but you also increase the size of the video file itself in GB. It all depends on what you want to record and in what quality.

Truth. Also take into account that the graphics card lost support for driver optimization for new games, and to make everything even sweeter, the game developers decided that the graphics card that has support for dx12 and fsr3 is not able to do it because only fsr 1 has enabled it anymore. considering that it is a native resolution without scaling, it is still good considering that the drivers are "just enough to exist". The fps is higher than 25-30, you probably concluded that from the scenes that are locked in 30 fps.

max settings lol

@@kaurazmaj actually its quiet impressive that they just released the 24.9.1 recently for the polaris cards, it doesnt change much but i feel like they still care about these cards because of the big community that are using it!

@@Jrdn07 yea bro runs pretty good since capcom did a great job on the optimization and all, u can check videos on the youtube

@@nkzbda It's true that they released a new driver for Polaris and Vega cards 24.9.1, but as I told you before, there is no more "fine tuning" or optimization for newer games as it was before. These are now drivers with security patches only.

I expected a worse experience considering that it is in UE5.

Motion blur is set to default (high), so it's not turned off and that's the reason for the blur in the video and youtube compression doesn't like it. Change the video quality from auto to 1440p.

Something is probably not set up correctly on your computer. I have overclocked the processor, ram memory and for some games I additionally overclock the graphics card if I think it needs a little more power. All UNNECESSARY processes on Windows have been turned off, which additionally contributes to better performance, and the system itself must be CLEAN.

@@kaurazmaj I have ReviOS.. So it's good for performance. I settet power on Performance have 750 +80 bronze BeQuit cpu Its 4,20 clock.

@@Dremora MY SPEC: CPU: i7-4790K (4.7 GHz OC) 1.220v CPU Cooler: ID-COOLING FROZN A410 Black GPU: PowerColor RX480 Red Devil 8 GB MBO: ASRock Z97 Pro3 RAM: Corsair Vengeance 32GB 1600 MHz CL9-9-9-24 (4*8GB) XMP 1.3 2133 MHz CL12-12-12-28 1.650v OC PSU: EVGA 600W 80+ I think it is now clearer to you why my performance is better.

@@kaurazmaj but how it is sk smooth? My game feels like 30 - 20 fps..

@@Dremora There is a big difference when your processor works at 4.2 GHz and does not have boost 4.4 GHz and mine which is overclocked to 4.7 GHz. Not to mention other things.

8 GB

I have no intention of changing that cpu for at least another 5-6 years. It just needs a stronger graphics card than the current one. RTX3070 or RX6700XT would be quite enough for him to maintain a good balance. Change the video quality from auto to 1440p.

I don't have the game yet, but I recorded a benchmark.

Red Devil! In my opinion, this graphics card is better than many RX580 models.

Have you tried 2400MHz CL11-13-13-35-CR2 1.650v?

@@kaurazmaji tried but it still not working, maybe other latency for 2400Mhz ?

Attempt to increase latency to CL11-14-14-38. I don't have your copy of the memory so I don't know what latency would suit it best and how well it is able to stay at that frequency. My samples are 2x8 GB CMZ8GX3MA1600C9 and 2x8 GB CMZ16GX3M2A1600C9. So my total 32 GB work in dual chanell mode at a frequency of 2400 MHz with latency CL11-13-13-35-CR2 with a voltage of 1,650v without problems.

It's just a benchmark that showed absolutely nothing but levels. There is no bottleneck between the i7-4790k and the RX480. The RX480 does not receive new driver updates for newer games. It probably creates a negative effect on the gpu.

I do not believe that these performances will remain because this is only a representation of the level design, no activities or combat is shown, which is more complex than rendering an empty map.

I guess you're not very lucky when it comes to the silicon lottery. Your processor obviously requires a much higher voltage to maintain stability. I suggest you keep it at 4.7 GHz with a voltage of 1.220v. With this, you reduce unnecessary heating, the voltage is low and it maintains stability.

The i7-3770 is a much weaker processor than the i7-4790k + overclocked to 4.7 GHz. I think that the GPU has a bigger role here.

In the first minutes, you have the settings set in the game.

You should probably change the thermal paste on your gpu. How much did you set the vcore for the gpu when overclocking to 1400 MHz? You should be able to work at 1400 Mhz without any problems. Try these settings. Core Voltage (mV) : +50 Power Limit (%) : +50 Temp.Limit (°C) : 90 Core Clock (MHz): 1400 Memory Clock (MHz): 2125 Confirm changes or save them to a certain number so you don't have to manually adjust the values ​​every time.

The driver is 24.3.1. This can be caused by several sources. Maybe your graphic needs a cleaning treatment and a change of thermal paste. What processor are you using, how much RAM and whether your power supply has enough power. The cause can also be an unhealthy system.

@@kaurazmaj @kaurazmaj Actually for other heavy games, it's fluid with high fps. But only this game is really strange. Do you mean 'unhealthy system' is like a failed windows update or something? I'm curious about that

@@nanangadiw Is it a purchased or pirated version of the game? If he probably downloaded the pirated one together with the junk that has no place on the system.

​@@kaurazmajit's pirated. I'm using 8gb ram btw

@@nanangadiw Then don't be surprised, if you take a closer look at the 32 GB ram sometimes it takes up 18+ Gb in my gameplay.

I will also try 4.8 GHz, so if it works, I will go higher. I'm waiting for a better cooler to arrive. This is cooled with a DeepCool Gammaxx 300 cooler. And it is not intended for aggressive overclocking.

kzbin.info/www/bejne/paOQYZh-g9-eb9U

@@kaurazmaj What new cooler have you gone for?.

@@tonetonic2013 I am satisfied with the cooler and its performance in relation to the price. 4.8 GHz with a voltage of 1.265v with a maximum load not exceeding 80 degrees. Otherwise the temperatures are ridiculous. I'm trying cheaper cooler variants. Now I use www.idcooling.com/Product/detail/id/411/name/FROZN%20A410%20BLACK . I bypass water cooling. I see that there is not much about that cooler.

The voltage of the processor is 1,200v, the thermal paste Artic MX-6 and the coller is one of the cheaper ones, so it is not stock, DeepCool Gammaxx 300.

@@kaurazmaj Cool. I just got the new Deepcool AK400 and its amazing. Running 1.251,4.449,and turbo at 4.7 temps no higher than 55c!.Coming from FX9590 and this chip is so much better. I will try to get lower v-core if you are on 1.2 though, thanks .👍

@@tonetonic2013 You should be able to work without problems at 4.6 Ghz with 1,200v, with that voltage you could even try at 4.7 GHz. Since you have better cooling. My cooling can't cool the processor enough while it is overclocked to 4.7 GHz because it is not designed for stronger overclocking.

@@kaurazmaj At 4.140 now and seems stable, will go lower because i like this chip and i want to keep it,I think i got a lucky strike with the silicon though. I only like a few games and as long as i can get 60fps in them im happy at that, early gen intel is cheap and plentiful around.

@@tonetonic2013 You can easily set all cores to 4.6 GHz with a voltage of 1,200v. Anything above 1,300v is no longer a safe voltage and I do not recommend it. I always try to get as low a voltage as possible with as high an overclock as possible. And to remain stable. As soon as the voltage is lower, the temperatures are also lower.

You probably had a problem somewhere in the graphics driver. I suggest that you uninstall the graphics driver with DDU in safe mode and install it again. 1. Download the new driver 2. Do an uninstall in safe mode with a DDU (recommended) graphics card. 3. Go back to normal Windows and do a new driver installation, but disconnect the cable from the Internet or Wi-Fi so that Windows doesn't update.

@@kaurazmaj Hello, I just ran DDU, and put again the drivers but this time minimal, and it gives me the same error. Could it be my Windows at fault ? I have Win10 20H2

@@spacegodmurder Did you maybe install the necessary visual c++ redistributable packages that are needed for the game? It could also be that there is an error with your system.

It's easiest to lower everything to minimum details and get a decent fps. My goal is not to capture the highest possible fps in the game, but to see if an 8-year-old graphics card with lost support for optimizing new games is still capable of running games at maximum settings with fsr and what results it achieves.

I never test games on low settings, but always put them on ultra or minimally high. My goal is to get the maximum out of this graphics model at the highest settings. If necessary, I only add fsr. 0:07-0:43 You have a view of the settings in the game.

Is the game installed on your HDD or SSD? While launching the game, try to wait a few minutes for shader optimization. You probably won't be shown a percentage, but wait a minute. You shouldn't have any problems later. Go to graphics settings and click on restart shaders compilation. And when you start the game, wait a few minutes.

If you have MSI Afterburner installed, you can monitor the fps during startup. When it jumps from the current values ​​that you get at startup, you will know that it has done shaders optimization.

@@kaurazmaj Its on hdd..

@@kaurazmaj Owh ok.. i will updated soon if the issue are still there..

@@razmanrhoads2078 Shader optimization usually takes a little longer on HDD. I will install it again so that I know exactly where the problem is.

Then you are really behind the times. And if you don't know how to crack it, that's another topic. 😉

Недостаток видеопамяти. Видеокарта на 4 ГБ уже не подходит для новых игр, а тактовая частота у вас наверняка ниже, чем у моей видеокарты, что тоже влияет на производительность.

@@kaurazmaj Вцелом согласен.Но конкретно с этой игрой хз что происходит.Вот тут у чувака на 570 4 gb и у него на первой локации нормально всё,фпс в 2 раза больше почти. kzbin.info/www/bejne/hojSqJpniJaDbac

@@_IIURI_ Когда вы установили последнюю версию графического драйвера, вы установили ее правильно? Возможно, у вас что-то осталось от предыдущей версии, поэтому теперь это создает проблемы и снижает производительность. На вашем месте я бы снова загрузил графический драйвер и снова удалил его с помощью программного обеспечения DDU в безопасном режиме. Потом новая установка.

I would not recommend RX 4xx, RX 5xx or Vega graphics cards because they have lost support in drivers for optimizing newer games. I would recommend the RX5700xt.

@@kaurazmaj should i get gtx 1070 8gb or rx 5600 6gb its the same price

@@Real-mtta The GTX 1070 has the advantage due to the amount of video memory, while the RX5600XT does not lag behind it, it is even better in some segments, but it is limited to 6GB, which can be a problem with high details in the game. That's why I suggested the RX5700XT, which you shouldn't have any problems with.

@@Real-mtta In my opinion, the RX5600XT is a better option if you are hungry for performance and speed than the GTX 1070 if you just decided between those two cards.

@@kaurazmaj well no they arent legacy they have driver support there is non-rdna branch and rdna branch the rdna branch gets all updates instantly while in non-rdna they have it later.

Я использовал последний доступный для моей карты номер 24.3.1.

@@kaurazmaj я тоже проверил с самыми новыми ,но к сожалению не решилась проблема...

@@EXPERT_YT Какая у вас видеокарта, сколько оперативной памяти и какой процессор? Сбой может быть вызван чем-то другим, кроме самой видеокарты. На видео видно, что у меня оперативная память достаточно загружена, но учитывая, что у нее 32 ГБ ОЗУ, эти загруженные 15-18 ГБ не доставляют проблем.

@@kaurazmaj gigabyte rx 480 4gb OC,i7-3770,16gb в двух канале.Проблема написано было в драйверах видяхи или же сам файл игры плох,но может быть и из-за инструкции ф16с

@@EXPERT_YT Я думаю ваша проблема в видеопамяти видеокарты. Попробуйте уменьшить детализацию, и тогда у вас не должно возникнуть проблем. Вы можете установить MSI Afterburner и дополнительно следить за интенсивностью использования графики и температурой. Не ждите многого от 4 ГБ видеопамяти. Когда вы запустите игру, нажмите ctrl+shift+o, чтобы отобразить загрузку графики программного обеспечения AMD в игре.

Probably, when I was recording, the driver version was 23.11.1, while now it is 24.1.1

I'm getting very similar fps with my 4790. thought this was a problem with my cpu only. but seems like those i7s r really bad for warzone these days. @@kaurazmaj

@@Dark.Syndicate It depends on which graphics card you paired the processor with. Try it with an RTX 3060 or RX6700XT and you'll get a completely different impression. The processor still does the job very well. My graphics are "beaten by time" but it still copes with all new games in an acceptable fps. The only game that causes the problem is Alan Wake 2.

​@@Dark.SyndicateIn 1080p resolution at the maximum settings that the game allows.

It depends on your settings in the game, but I think that 8GB of RAM can create certain limitations for you.

In the left upper corner