Thank you very much for the video with a great idea. It's very frustrating when the bike slows down after exceeding a certain speed, but now it's pure joy. Thank you!

Can anyone help me at all to try and speed my bike up ?

My claud butter wrath don’t have this magnet and I don’t know how to do it this is my first e-bike and 15mph is to slow

Won't this also give the incorrect speed display?

I moved the sensor as you said and after 30km the syncdrive warning appeared on the display and it doesn't work anymore... what can be done, I put the sensor in its place and it doesn't work? Giant bikes

I'm the owner of HaiBike All Track 4 Bosh motor. I did it exactly like on video. It is actually working. Now from 25 km/h I can make easily close to 40 km/h and THIS is enjoyable riding! I got 9 rear gear, if I put a 12 gear cassette on the back, I would hit probably 60 km/h. But I don't need that. 40km/h is enough for me to fully enjoy the ride. I'm still safe when society is around. Thank you for this video.

Swifty 650 ped assist bike thanks

How do u bye pass one with a crank type magnetic

I am afraid my battery is going to be very bad because of this is that so ?

Anyone know if it has to be same magnet cos I de restricted mine a while back and I’ve managed to lose the magnet

Ok. Tried this too and 2 times got the dreaded E014 error To fix it i followed this procedure. To clear the Shimano Steps E014 error, follow these steps: Check Sensor Position: Ensure the speed sensor and magnet are correctly positioned. The magnet should be aligned with the sensor on the wheel spoke Adjust and Test: If repositioning doesn't work, try adjusting the magnet closer to the sensor mounting bolt. Turn on the power and rotate the crank clockwise for up to 200 Wheel rotations Reset System: Power off the bike, remove the battery, and press the power button to drain residual power. Reattach the battery and test again. Once fixed I taped my speed sensor 1" closer to the wheel center and now I have about 29kph of assist instead of 25kph. Just enough and no errors or random gear changes if I stop pedaling

IF YOU'RE PLANNING TO DO THIS, DON'T FORGET IT'S ILLEGAL!

I'd be careful with this. Some mid drivers also have internal crank sensors and will brick the motor and void warranty after detecting identical values from wheel speed and crank speed for too long. Setting wheel size to minimum possible is a bit safer but less effective.

How do we hack the new AMFLOW?

I used this hack to de-restrict my Merida21eSpresso 300 SE EQ . It worked perfectly for 15km then dropped out with the dreaded EO14 error. I tried setting the sensor & magnet back to original positions & doing the 100 revolution thing several times with no success. Took the bike back to the bike shop & they attempted to re-install & update firmware with no success. I am now facing a motor replacement cost of around AU$1200 unless someone is able to come up with a solution. I have been told that I have probably "bricked" the motor. HELP PLEASE

Immediately successful 2019 Giant Explore E+3.

thanks for this Ebike brother.

I love your accent your explained everything so well 100 out of 100 stars ⭐️ for you mate

Stick magnet on pedal flip sensor over cable ties

How to brick your e-bike for free :D Don't do this on 2020+ or newer e-bikes or the manufacturer will block your bike

Would this still work if I moved the sensor so its still detected by the wheel just further back to the front casette?

Im here in the states. Purchased my first ebike. Jasion roamer and it already goes about 25-28 mph have to say thats pretty fast for a bike !

Why not use a zip tie instead of tape for the sensor and M3 tape for the magnet?

When you started talking about the magnet, I was thinking about a mechanism to convert the wheel's speed from 2 to 1, basically setting the limit to 50 km/h. Crank arm is a good idea, but it's a known method by these brands. I'm not trying this on my bosch smart system, because it has a built-in GPS and it could probably detect the mismatch and brick it.

How to hack a Scott e bike with Bosch motor

After about 150 miles this will give you a 050 code fault now I can't fix my shimano ep8

Will any magnet work on the pedal

This really is a hack. How dumb...if you want to restrict your bike buy a chip tuner so the rest of shit actually works.

Won’t this make your speedo readings incorrect?

Possible for riverside 500e?

So can you really do this on any e bike? Like for sure ?

i notice my ebike motor does that too but i not gonna do i not a ebike expert lol.

Rockrider eSt 520 still worked!

Perfekt

Just don't get caught by the law... they know about this and will do you for it.

If you remove the magnet entirely, then what happens?

How did you fix error E014?

Tried this with latest 2024 bosch cx gen 4 motor doesn't work at all just thrown a code up within 20 metres of riding motor made a funny noise switched it off and converted back to the original all fully working again looks like the speedboat will be an investment

Hello what if the sensor is hiding inside the wheel, inside the motor on the back wheels of the bicycle! 😢 is there a chance to make it happen? I’m using Ducati scramble scr-e , thanks in advance !

Thank you that literally helped me so much!

WHO is in w10 club

how to do it on a bafang rear motor, plastic sensor with magnets on front chainring?

is the cadence sensor or torque sensor?

Can you guarantee that the police will be unable to catch me with this speed mod? I am worried they see the taped magnet and start chasing me.

Can you add a throttle to these giant e bikes?

Does this only work if the original magnet is on the frame of an e-bike, because I cannot find any external magnets on mine?

How does this actually work? If the magnet passes just the same as it does on the tyre magnet how does it de-restrict? Is it because the crank arm passes quicker than what it does on the rim?

Watch out new models have tampering sensor

I just got the new Gyrocopters Fury Fat Tire Electric Bike and it's stucked at 25 km/h... Can you look into it? I am ok at figuring these things out but now I'm lost. There is no speedometer or magnets, it seems... and I don't know what to look for anymore! Help would be greatly appreciated! Please and thanks!

Hi, thanks, but what happens if you completely remove the magnet, does the motor assist at all?