Don't like looking at these , especially on an RC Channel 🫣 . If we wanted to see NONE RC's , we would be on another you tube channel , NOT an RC channel 🫣 .
@offsetrc11 күн бұрын
@ianjohnhorwood2605 some times not all ways good weather for rcs
@ianjohnhorwood26058 күн бұрын
That's why you can get tiny RC's for indoors , brother 🤣🤣🤣 .
@ianjohnhorwood26058 күн бұрын
I wouldn't have minded so much , if you had some lego speed champions cars , and you'd put your own spin on some custom builds 🤣🤣🤣
@offsetrc8 күн бұрын
@ianjohnhorwood2605 well I have zero interest in LEGO cars if you want to do that why don't you put some your channel see how it goes 👍
@DenbyEvans12 күн бұрын
Cool! Thanks for mentioning that the parts for MM01 and MD001 are interchangeable. I'd been trying to find out if the ThreeZero version and the MM01's parts were interchangeable, but no-one had said anything about that. So, it's great to find out that they are!
@offsetrc12 күн бұрын
@DenbyEvans I'm not sure on the three zero as that one is the dark of the moon Optimus the other ones are from the bumblebee film so I'm not sure bud the 2 that you see most is the mn01 and md01 if you have the three zero octimus I gess it would but you would have to see umif it's got the panel on the arms I will be held on with a magnet so it will just pop of easy
@DenbyEvans12 күн бұрын
By the way, if you want to get the perfect decals for these figures, then you should check out the website for Magic Square, specifically the OD-03 Autobot Sticker - Cartoon Style - White Edge Only - Gloss decals, which are specifically for the Bumblebee movie Autobots.
@offsetrc12 күн бұрын
My three zero is the one with the swords
@DenbyEvans12 күн бұрын
@@offsetrc Thanks! As far as I understand, the MD001 and the ThreeZero Bumblebee DLX Optimus Prime are the same size, so if the wheel covers are interchangeable then that probably goes for most of the parts. By the way, if you want the perfect decals, look for the OD-03 ones on the Magic Square site.
@offsetrc12 күн бұрын
@DenbyEvans definitely gess it will do
@Matze1316216 күн бұрын
Where do you buy the tires? Please let me know with a link if it’s possible.👍🙏
@offsetrc16 күн бұрын
@Matze13162 AliExpress I'll see what I can do
@offsetrc16 күн бұрын
@@Matze13162 I just found this on AliExpress: £6.80 | 1:18 LDRC AE86 A86 LD1801 LD1802 LD1803 A01 A02 4pcs 31mm RC Hard Drift Tire Wheel Hard Tyre 1/18 RC Car Upgrade Parts a.aliexpress.com/_EwuilzE
@offsetrc16 күн бұрын
@@Matze13162 this should help you out 👍
@Matze1316216 күн бұрын
@@offsetrcthanks a lot 👍
@offsetrc16 күн бұрын
@Matze13162 your very welcome 👍
@michaelgraham294320 күн бұрын
Cool 👍
@IsaacBanuelosTVАй бұрын
Love it getting into it again ❤
@BosphorusBashingАй бұрын
Nice driving. I really love this little guy. Quick, small, easy to carry around. I proudly display it next to its big brother, WR8 :)
@offsetrcАй бұрын
@@BosphorusBashing ya there a blast to rip a bout ya I got a couple of wr8s but not much space left to display stuff running out of room definitely not happy a bout that as I got so much more I what to do
@drawinorangesАй бұрын
awesome!
@drawinorangesАй бұрын
nice
@offsetrcАй бұрын
@@drawinoranges many thanks much appreciated 👍
@drawinorangesАй бұрын
whats the model kit?
@offsetrcАй бұрын
@drawinoranges hi I'm not sure on the make but I found them on AliExpress
@keilarodriguez7322Ай бұрын
🎉🎉🎉🎉🎉🎉❤❤❤❤❤❤❤😮😮😮😮😮
@offsetrcАй бұрын
@keilarodriguez7322 thanks wait till you see the new one 😊😊
@keilarodriguez7322Ай бұрын
You’re welcome I hope you get 2 million subscribers
@offsetrcАй бұрын
@keilarodriguez7322 wow ya that would be amazing 👏 my be one day 😏🙏🙏👍
@offsetrcАй бұрын
I got a video coming on the model kits only small ones but the figure after is what it's about so should be video after this next one 🤞👍
@jimboslice12-o7mАй бұрын
Nice one mate I might back there soon for another rip , appreciate you posting it
@tittentei7331Ай бұрын
Btw. I have a radiolink RC8X Transmitter. Should i use that on this cars?
@offsetrcАй бұрын
@tittentei7331 that's up to you m8 you what to find radio with a small receiver so it wouldn't take up louds of space as there is not louds in there to begin with
@tittentei7331Ай бұрын
@@offsetrc I can get very small receiver to this transmitter so i will try:)
@tittentei7331Ай бұрын
Hey. Nice video. Where can i buy the tires you have on the ken block rc? Can i upgrade the motor to brushless on this RC? I have that and it fit. I'm taking metal on my car. So wonder about to upgrade the motor and ESC with a hobby wing combo. Love these cars. Have 4 of them in different bodys:)
@offsetrcАй бұрын
@tittentei7331 yes you can put it in there put in on KZbin k989 brushless conversion there are qwiq a few videos on it wheels on AliExpress and there 22mm bud
@tittentei7331Ай бұрын
@@offsetrc Thank you so much, mate, for both the answer. Great!
@offsetrcАй бұрын
@tittentei7331 no probs it's what it's a bout anti it sharing information to help others and not just your self 👍
@tittentei7331Ай бұрын
@@offsetrc Hi again. Can i order metal pinion and gears for this RC also? I change the gear box from stock to metal, and know it will not go around when i try to drive. It is because the others parts are plastic gear? sorry, my bad English mate.
@jimboslice12-o7mАй бұрын
And the kyosho looks sick
@offsetrcАй бұрын
@@jimboslice12-o7m thanks bro ya I got the tamiya version of it and it's got a light kit and it's brushless I think it's on a tt01 chassis
@jimboslice12-o7mАй бұрын
Fiesta looks cool mate 👌 nice wheels
@offsetrcАй бұрын
@@jimboslice12-o7m cheers pal AliExpress wheels gonna get some for miniz just looking at some think they will help as they are more slider than the stock kyosho ones
@offsetrcАй бұрын
This car belongs to James pond 0011 check out his channel 👍
@jimboslice12-o7mАй бұрын
Yo mate can you post that 80mph infraction from last night please ta
@offsetrcАй бұрын
@jimboslice12-o7m I would but it's only short bud
@user-wp9mz2 ай бұрын
A lot of people don't know what to think of the hyper go but after I give them a demonstration their attitude changes real quick LOL hypergo doesn't get enough credit very durable RC car
@offsetrc2 ай бұрын
@@user-wp9mz ya there are good fast and tough as well love mine especially this c3 looks fantastic for the money
@user-wp9mz2 ай бұрын
@@offsetrc I just ordered one I can't wait till it gets here I have the h16 BM which is a beast I haven't broke anything on it yet had it a year I also have the 14 301 absolutely love that truck
@offsetrc2 ай бұрын
@user-wp9mz well have fun there a blast at side ways action power slides and spinning a bout especially if your a wrc fan
@scaleworksRC2 ай бұрын
Who doesn't love ninjas and turtles? 😁
@roargamer0072 ай бұрын
Battlefield 4 is still perfect😎
@offsetrc2 ай бұрын
@roargamer007 ya I really liked it when I had my old account I was way higher than this one I was gutted when I lost it as I had the pass for it all the maps everything was awesome what's your thoughts on 2042
@rcplaytime2 ай бұрын
nice dude 👌😀😀👍👍
@offsetrc2 ай бұрын
@rcplaytime many thanks my man I had thought a bout doing game on my youtube channel but not really done and but ya thanks for the support 👍
@rcnitroflux23612 ай бұрын
Great flight bud footage looks great
@offsetrc2 ай бұрын
@@rcnitroflux2361 I tried 🤣🤣
@scaleworksRC2 ай бұрын
Good effort, but that's definitely too much wind for that little bird. I had a Firefox about that size that flew great indoors, but anything other than dead still air outdoors or even the air conditioning would throw it all over the place. You need a 200-300 class heli for those conditions you're in, but that's when they start getting expensive
@offsetrc2 ай бұрын
@scaleworksRC well just had to try it
@offsetrc2 ай бұрын
@scaleworksRC thought I'd get round to trying out the gopro bud had it like 2 months thought I'd better yous it lol
@scaleworksRC2 ай бұрын
@@offsetrc Yep.. that's the only way to know for sure 👍
@jameswhiteside1353 ай бұрын
The Focus is looking good, much better than sitting in a box
@offsetrc3 ай бұрын
@jameswhiteside135 cheees man still not run it yet got it going but I don't trust the old radio gear so I'm gonna leave it a lone for a bit and go back to it at a later date
@shindisingh11653 ай бұрын
Just found this video whilst searching for TA-01/02 stuff and thought I'd chime in if i may 😊 lol.. there's a few more differences between the 2 buddy. They are as follows: •Front & Rear Upper & Lower arms •Front steering knuckles (+bearings and shafts) •Steering turnbuckle shaft length •chassis tub length (+prop shaft) •Rear body posts I think the TA-02 has different idler gears and counter gears (aluminium) The 01 had shorter front arms and wider steering knuckles (red) which caused the wheel to steer a wider arch from the central pivot point i.e the kingpin. With the 02 they fitted longer front arms and narrower steering knuckles (blue) helping to lessen the steering arch of the front wheels. Another example: racing cars have long arms and short hubs, the arms often fit into the wheel hub ensuring the wheels steer on the spot, not in an arch. Hope that makes sense. And yes, the shorter chassis tub on the 02 shifts the weight distribution forward, and it has swept back suspension arms at the rear to achieve the wheelbase diameter - whereas the 01 has rear arms that push the wheels forward to achive the wheelbase - they're different arms, it's not that the motor is mounted further forward away from the rear wheels. 01 rear arms point forward, 02 rear arms point backwards. The rear dampers mount differently at the bottom, too. I have the 01, 02 and 02SW on my desk, but I'm not sure which front suspension set up to go with, 01 or 02, or 02W (wide) even ... decisions decisions... 😅🤷♂️🤔 as for the tubs and rear arms, I'll keep one of each, so i have all 3 wheelbases 😉👌
@scaleworksRC3 ай бұрын
Good lil' rip about
@offsetrc3 ай бұрын
@scaleworksRC cheers m8 shell is all back nice I was hoping to get that engine bay and put that in it fortnite will make it look good but unfortunately it hasn't turned up yet
@rcnitroflux23614 ай бұрын
I think remote with dip switch can turn drag brake of bud
@offsetrc4 ай бұрын
@rcnitroflux2361 ya man it's definitely not good with drage brake man makd it suck but hopefully can sort that m8 cheers again bro awesome 👍
@jameswhiteside1354 ай бұрын
Love the skyline shell
@offsetrc4 ай бұрын
@jameswhiteside135 they look good but the stock electronics are not the best but it is avery nice car the blue one I think looks better
Yeah man these skyline electronics are real bad. Some of them wont allow you to disable the gyro aswell. Its a shame. Mines was fine for the first few months and then out of nowhere started doing the esc reset and not fully turning off the gyro anymore.
@offsetrc4 ай бұрын
@MooseRidez ya big let down but not much can do be better of with the esc out of a k989 or something that works at lest 🤣🤣
@offsetrc4 ай бұрын
More to come as I can I'm gonna make it drift if it's the last thing I do 👍
@MooseRidez4 ай бұрын
@offsetrc heck yeah. I have 3, 2 rx7 and the gtr. Mines is now powered by a dumborc rc/tx and a brushless motor🎉
@kjetilpedersen5834 ай бұрын
Love this car ❤Got it my self in my Collection this is my nr 3Mjx Hyper Go Car😊Nice video thanks 🙏 for sharing 🙏😊
@offsetrc4 ай бұрын
@kjetilpedersen583 thanks for the comment appreciate it sometimes it's nice to here thanks 😊
@offsetrc4 ай бұрын
@@kjetilpedersen583 I'll do a nother run soon bein hot in the uk
@scaleworksRC5 ай бұрын
Oh, nice! I have both brands of these and they are great for the money. I didn't know that bit about adjusting the suspension on the LDRC car.. thanks and have a good weekend!
@offsetrc5 ай бұрын
@scaleworksRC ya the new ones just have these little bars on them bit of a pain but means as there is no shocks the front wheel can't rub on them and you to pal 👍
@scaleworksRC5 ай бұрын
@@offsetrc Yep, neat little setup for what it is I actually ran the Trueno a bit after your video lol
@offsetrc5 ай бұрын
@scaleworksRC good to here I'm having trouble with mine but I'll explain that in a nother video 😞
@Sidr_Petrovich5 ай бұрын
It's nice to see your attention to detail. I mean the addition of a racing coloring book on wheel arches. I also plan to add this. There are these elements on the sticker sheet, but they lack the necessary yellow-black coloring. This is a rather insulting flaw on the part of our Chinese friends. I am also considering options for installing protective fenders on the chassis. In my opinion, they are absolutely necessary, since a transparent dust cover is still not very effective. But overall, I think it's a pretty good and high-quality chassis. I do not lose hope to see bodies on it, for example subaru impreza or audi s1 quattro. In the meantime, I ordered a spare Citroen body just in case.
@offsetrc5 ай бұрын
@MrSadoshenko many thanks I appreciate your comment ya it's nice to have car the way it's supposed to be I just think if they did a bit more just that little bit more and this Is one of the best cheap rc bodys ever and they should do a way with them indicators and just turn it into headlights that would definitely Finnish it and if they add the drivers name with the number and a little license plat to match it and yes man your right these are definitely worth the money well strong cars and more than way fast enough 👍
@BosphorusBashing5 ай бұрын
Given the low price, this tiny guy performs wonderfully. I'll definitely get one :)
@offsetrc5 ай бұрын
@BosphorusBashing for some thing that is cheap it works well I'll give it that and got a bit of speed a bout it
@scaleworksRC6 ай бұрын
Yeah man, MJX gang is out this weekend! 😁🦾 I'm still running the stock ESC with a Dumbo receiver and radio. It still has the delay, but it's manageable with tuning the throttle trim. That HW ESC is the way to go like you said though, much more tuning options👍 Nice jump shots at the end there!
@offsetrc6 ай бұрын
Not gonna lie bud I would say hobbywing esc is the best thing you can do to it and I'm still running stock radio gear and it's way better even with stock radio gear so much better throttle response is way better you won't regret it telling you now and iv got it where the old one was with the fan of it and it still fits underneath the dirt protector ps good luck with mjx weekend hope ya all have a blast with them happy rcing my man 👍
@scaleworksRC6 ай бұрын
@@offsetrc Right on, I will definitely consider putting one in. I just got tired of messing with it after upgrading the servo and having to swap receiver and gyro to make it work right. That, and changing diff fluids 2x was a bit of a chore as well, but I got used to the way it drives for now
@offsetrc6 ай бұрын
I'm not running giro took it out and that's it really esc took out the giro and a little suspension tuning and that's it's how it is
@scaleworksRC6 ай бұрын
Nice run! She's a beauty 🤩
@offsetrc6 ай бұрын
Thanks very much m8 ya was lucky was in good condition
@BosphorusBashing7 ай бұрын
Wow, this thing is huge 😱Another great video mate 😇
@offsetrc7 ай бұрын
Thanks man much appreciated Thanks for watching to hopefully will do a run video very soon 👍
@BosphorusBashing7 ай бұрын
Wonderful driving, that Kyosho body looks gorgeous. I guess Kyosho is the best at producing scale bodies :D
@offsetrc7 ай бұрын
Ya kyosho do good work with there body shells I do have the red body it's brand new still in packaging I like kyosho they make good rcs 👍
@BosphorusBashing7 ай бұрын
Love your videos mate. You got wonderful driving skills. Keep up the good work :)
@offsetrc7 ай бұрын
Thanks man was wounding when someone would notice 🤣🤣 thanks a lot for that really appreciate it 👍
@BosphorusBashing7 ай бұрын
@@offsetrc hahah, it's so obvious that not recognizing it is almost impossible ;)
@offsetrc7 ай бұрын
Thanks my man means a lot thanks for watching my video Appreciated very much 🤘🙂👍
@scaleworksRC7 ай бұрын
Nice rip! She handles smooth on that surface
@offsetrc7 ай бұрын
Definitely looks a good place for the smaller cars to like my udi or zd racing Ken block car
@vivienloriau74307 ай бұрын
where are you buy the light ?
@offsetrc7 ай бұрын
What do you mean pal do you mean where did I buy the lights is that what you mean m8
@offsetrc7 ай бұрын
Front and rear I made light bar and back rooth light is of AliExpress
@scaleworksRC7 ай бұрын
Very cool, brother! I like the styling and accessories. That interior and driver really completes the look. I think the tension from the bumper should hold that winch in place, but we shall see!
@offsetrc7 ай бұрын
Thanks man ya I'm happy with how its turned out so fare ya the bumper should hold in there pretty good man plus when yousing it you yous throttle with it so should be good m8 just got the hobbywing set up left to put in it really and it's done well what I whant to do to it any way 👍
@scaleworksRC7 ай бұрын
@@offsetrc Very good.. looking forward to seeing it out in the wild! 👀👍
@VARUNHARDY10007 ай бұрын
Did u buy this rc from banggood? ??🤨
@offsetrc7 ай бұрын
AliExpress 👍
@VARUNHARDY10007 ай бұрын
Bro is crying I feel the pain 🥺🥺🥺💔💔💔🥲😂
@scaleworksRC7 ай бұрын
Nice little rip! Those Cozzies are looking very nice, too. Very difficult car to drive in my rally games, but I always pick the Lancia for some reason. 🤷♂😁
@offsetrc7 ай бұрын
Cheers pal ya I got a lancia bud killerbody shell one on a ta02 chassis 👍
@rcaddictgarage7 ай бұрын
👍
@scaleworksRC8 ай бұрын
Nice looking Focus there! That white looks really clean with the body and livery. Sounds like she shouldn't need too much in the way of upgrades. I use those little sticky foam donut things to stiffen up my body posts.
@offsetrc8 ай бұрын
Thanks man appreciate it ya don't need much really just some oil shocks really my get center drive shaft but should be good with just the shocks 🤞
@scaleworksRC8 ай бұрын
@@offsetrc Nice! Tbh I think the Focus looks the best of all the new style of WRC car.
@scaleworksRC8 ай бұрын
Nice cars! Good tip about flat spotting the tires. Even on my little cheapy rigs, I rotate the wheels and re-position them every now and then so they don't sit too long on one spot. Those TT02s are looking good!
@offsetrc8 ай бұрын
Cheers my man I got 3 tt02s now well I gess one more or a different car needed now I think kinda liking the kyosho fazer rally car but have not made up my mind yet 🤔 what to do what to do 🤔🤔
@scaleworksRC8 ай бұрын
@@offsetrc Hehe, get both! I'm probably gonna do a comparison at some point, but I'm really liking the new XM-01 coming out. So many options!☺
@offsetrc8 ай бұрын
@@scaleworksRC what make is that chassis then xm-01 I know the tamiya ones but not heard of this one
@scaleworksRC8 ай бұрын
@@offsetrc Well, I tried to link you a video but youtube blocks it's own links 🙄 try and copy paste this in the search bar 'Tamiya's XM-01 Pro Rally Car - First Official Rally Runs!'