Came across your video. Same deal with the exhaust but I used a DeWalt Sawzall long blade and it cut through effortlessly. I will be following your work as I have an '88 and '92 in my crowded garage which i have to declutter.
@tyharrell1658Ай бұрын
Thank you so much, I did not understand how the fitting worked into the master and what part I would need - I am so appreciative that you demonstrated that for us that are fumbling our way through restorations and upgrades.
@jembuildzАй бұрын
@@tyharrell1658 I’m glad it helped and trust me. I know the feeling of fumbling through a project but stick with it. You’ll get there.
@charlesphilippou2619Ай бұрын
Hey great video! I'm looking for a factory muffler/tailpipe assembly like the one you removed from your IROC. I see that you have Illinois plate. How close to the Chicago area are you? Thanks, Charlie.
@vandettabuilds66412 ай бұрын
I built my exhaust. Hedman mid length headers 3" to a 4" collector Single 4" all the way out the back.
@jembuildz2 ай бұрын
I wish I had just done my exhausts y pipe from the start.
@vandettabuilds66412 ай бұрын
I'm riding in my 92 Camaro LS 6 liter AR 5 from a GMC Canyon
@jembuildz2 ай бұрын
I’ve put about 100 miles on mine since I did the swap and I’m very happy with it.
@davebarron59393 ай бұрын
Ever since I completed my LS swap, frankly I don't think I could drive a OEM 3rd gen again, beautiful car though.
@jembuildz3 ай бұрын
It’s such a night and day difference. I would be lying if I said I haven’t been thinking about a full engine, trans and rear end swap from a 98-02 into my 89.
@shyfilipinangrumpyveterandude3 ай бұрын
Beautiful 🥰
@Sleepdeprivedmenace12473 ай бұрын
Aww (first
@Cole2OO54 ай бұрын
Wait..WAIT-
@Kosworth4 ай бұрын
That's when you bust out the big drone and fly it up there to say hi.
@ericankney59574 ай бұрын
Might be stuck, you should see if he needs a tow or something.....
@benitomachado80844 ай бұрын
I love this song
@GenealRC2254 ай бұрын
THATS THE LITTLE BIRD THAT TOOK OFF FROM NAPA AIRPORT I SAW IT!
@davidrouse70524 ай бұрын
LOOK MA,A GHETTO BIRD!
@travisgessler62834 ай бұрын
Perfect RPG opportunity
@jembuildz4 ай бұрын
😂
@dereksevers91874 ай бұрын
I got a buddy that works for Bell I wonder if he does the same thing with his little bird or is he likes to call it the Loach?
@MetaVizions4 ай бұрын
I really wanna see an updated quadrocopter variant of the lil bird
@N.C.S.W.I.C4 ай бұрын
"Honey. Grab my M82."
@davidbright14894 ай бұрын
Not really doing anything different than anyone else out there…..
@jembuildz4 ай бұрын
I agree, I was just hoping to help anyone with questions on how to set it up get started in the right direction.
@davidbright14894 ай бұрын
@@jembuildz gotcha. On a side note how much power you making? I’m going LS on my 3rd gen and wanna run the factory z28 air box. Hoping it will support 500hp
@jembuildz4 ай бұрын
@@davidbright1489 that’s awesome! I think you’re gonna love the way your 3rd gen feels with LS power in it. I haven’t dynod my car yet, but I’m realistically thinking I have 350 rwhp. I think your airbox should support it.
@jasonlill20203 ай бұрын
I’d be monitoring how much oil you get at that intake AN fitting. The rocker cover normally vents back up that hose towards the intake coming off high revs. Most people have a catch can in that line, and usually a breather instead of the intake connection.
@jembuildz3 ай бұрын
@@jasonlill2020 I’ve actually switched the line from the catch can since I did this video. The catch can line now runs to the 3/8 input on the sniper and the brake booster line runs to the 3/8 input on the intake.
@JMD834 ай бұрын
Looks like a very well thought out and executed plan. Good luck with the build and enjoy!
@jembuildz4 ай бұрын
Thank you and thanks for watching! I just wrapped up the exhaust yesterday and will get another video out soon.
@beerwrenchgarage4 ай бұрын
Hey! Great video and good work! That 89 looks and sounds PHENOMENAL! I dont know how your channel hasnt exploded yet - but keep up the good work, it'll come!
@jembuildz4 ай бұрын
Thank you! I appreciate it.
@irockz28194 ай бұрын
Thanks for the info, Bud. You wouldn't happen to know the part number on the braided holes nine.
@jembuildz4 ай бұрын
I’ll have to look thru my receipts, if I find it I’ll let you know.
@user17213_q4 ай бұрын
Awesome ❤
@user17213_q4 ай бұрын
Lol
@user17213_q4 ай бұрын
Oml dad
@user17213_q4 ай бұрын
Lol your funny!❤
@zaneseligman13134 ай бұрын
I have to wonder why this was made into a video. Are you normally not able to fix anything? I’m not sure I would post about it, but I guess if you’re that proud of yourself congratulations …. I guess..idk…
@sageminentjunky51974 ай бұрын
Your almost as bad as me
@steggc854 ай бұрын
Do what I do. Twisted wire.
@xmradio114 ай бұрын
Spring clampation devices are better.
@Xedilian4 ай бұрын
A cable tie would also work.
@tonyz64214 ай бұрын
Awesome 👍🏼👍🏼
@kittykat678914 ай бұрын
Hope you were going to get ziptie
@augustparent77754 ай бұрын
And he remembers where it’s at cause NO ONE TOUCHED IT OR MOVED IT
@cloroxlavenderscent43074 ай бұрын
Its like me fixing my brakes by putting nails in the holes in the abs pump. Now at least i have front brakes.
@jembuildz4 ай бұрын
ABS takes all the fun out of driving lol
@tomkoval4904 ай бұрын
Zip ties lol
@jembuildz4 ай бұрын
To the rescue every time!
@BenMccloud-kz6lk4 ай бұрын
Doesn't look like the clamp was sitting around very ling i like authenticity in my memes😤
@BenMccloud-kz6lk4 ай бұрын
Looks new
@jembuildz4 ай бұрын
It is, but it came with an install kit that I never used but threw it in my bin of parts that have new and used parts 😃
@BenMccloud-kz6lk4 ай бұрын
@JEMBuilt I'm just busting your balls don't take me seriously liked the video keep up the great work
@ph4tb0ijean4 ай бұрын
make it into a kit and ill buy one!!! all i have is a t5 and been looking for alternatives. Awesome build!!!
@jembuildz4 ай бұрын
That’s something I’ve actually been thinking about.
@kurrentevent2 ай бұрын
Can't wait for you to make the kit then man!@jembuildz
@TJsCustoms5 ай бұрын
100th sub! And thank you for the info. I’m doing an LS swap with cd009 trans. And needed to convert the clutch system like this. You’re the man!
@jembuildz5 ай бұрын
Thanks for subbing! 100th sub too…that’s awesome. I’ve been slacking on the videos but that doesn’t mean I haven’t been busy on the car. I’m hoping to get and update out soon.
@bernardwarr41875 ай бұрын
Hi. When it was all installed, did you look through the viewing inspection opening and see the whole bearing and hose’s moves towards the clutch, only the small sleeves stayed still? Greetings from the UK 🇬🇧
@jembuildz5 ай бұрын
Yes, I have a bore scope camera I bought off Amazon and was able to have my son operate the clutch pedal while I viewed the internals move.
@bernardwarr41875 ай бұрын
@@jembuildz I was surprised to see the pipe housing fitting moving too? Obviously you need flexible lines with this design
@carllattimore82277 ай бұрын
BEST VIDEO on this. GOT the key point right away!
@MS-bx7ow7 ай бұрын
2:50 that spacer you pointed out, how long is it? Wondering what the spacing is inside the bracket