About ready to give up, the dropout section went in fine, BUT the downspouts don't seem to fit any of the joiner pieces, without some sort of connector piece. I cannot, figure this out. So weird , look like a breeze on your video. I'm just doing a small gutter at where my house roof joins to divert run off (heavy run) into my front porch gutter and I am so tired of trying to get this vinyl thing down.

There is nothing easy when working overhead on a ladder.

Those "joiners" are trash. Couldn't even get them to snap together correctly at home Depot. Definitely no way you're not using caulk or some kind of sealant with these. You're going to need a lot for the extensive gaps.

the "music" is not only not needed but a serious amount of noise!!!

Great video, right to the point. 😊

not badd...but editing is needed and closeup would be great. I give you a C-

What type/size screw are you using to attach the gutter hooks to the house?

I like the video very much. It is easy to follow. Wonderful job.! Mary from LESOTHO

The music sux

at the end of the video, his last downspout looks to be on a pivot? How did he do that?

Just installed on chicken coop and 3 car open sided steel shed. Didn’t have anything before. It’s ok - easy. But I wouldn’t use for house. Get a professional seamless steel instal for that. You can put on gutter covers yourself if you wanna save money.

Somewhat flimsy system. I am using for detached garage but would not consider for main house. I agree with those who suggest sliding the small piece with the drop outlet onto the gutter and cutting a corresponding opening in the gutter (as opposed to having to use the drop outlet section to connect a short piece of gutter to the long gutter piece I am also going to cut an opening in the top of the end cap that fits on the gutter extending from the drop outlet section so if the downspout clogs or is overwhelmed by water flow the excess water will come off the end instead of spilling out the entire length of the gutter. .

We just received a quote on friday for new "professional" installation for seamless gutters. $3, 000. I thought, damn I have to wait a whole month to get these in, let me watch a youtube video real quick. So I found this system at lowes, and purchased everything I needed. A little over $400, but might return a few parts. Took me about 3 hours to hang the entire one story home I have. Hope for rain now to see if I did a good job or not haha..

Should the gutters be hung on the drip edge or right under it and I notice there's a space in between the gutters and the fascia because of the hangers. Is that space normal?

Very nicely done truly inspirational, knowledgeable and resourceful.

Garbage

Seems like there is potential for water to get in behind the gutter as there is a large air gap. Also. They did not caulk the old holes which will allow water in.

Hope the inner-joint connectors have enough downhill to let water over the interior piece. I have the same system and, problem is after 1 year having bit water constantly sitting between joints because of the gutter interior piece being so thick, they all leak. So, so sad...

Thank you! Couldn’t see how the hooks went on, & was ready to take them back before seeing this video. Didn’t realize hooks went on the inside.

If you leave the section at the downspout as one piece you gain two very important things. Superior rigidity and two less seals to worry about. The gutter can be cut in the middle where it goes across the downspout with any of several tools, a box cutter knife would be hardest, but a hole saw will work, but leave rough edges, but an oscillating saw will make short work of that section, just cut out a rectangular area comparable to the drainage area made by having two separate pieces. Rigidity is paramount for any gutter system,as any kind of sagging will defeat the whole purpose of the system, to have a consistent fall allowing water to naturally drain away from your home and NOT settle at your foundation, possibly seeping into your basement or crawl space.

Just installed over 40ft, works perfectly! One huge recommendation: in the video they use standard #8 1.5" screws with a drill driver. I highly recommend getting exterior all purpose screws with a torx head and impact driver. Makes the job much easier. I swear their wood in the video is made out of marshmellow 😂

I bought this product cut and fit some of the pieces started to install it and realize what trash it actually was took my losses and took back what I didn't use do yourself a favor and stay away

These videos don't show installation of inside or outside corners, only straight runs.

How do you join two pieces of this gutter if not at 90 degree angle? I have to go around a bay window and need to join gutter at different angles. Cannot find manufactured angled gutter connectors.

No caulk or sealing from the gutter to the drop outlet??

There are no seals at the drop outlet so if the downspout clogs u have a huge leak.

So now when it starts pouring i have to run outside and make sure that i lower my gutter

Excellent how to video

So what happens when it's a windy rainy day and the wind blows the rain behind the gutter that's not all the way against your fascia. Plus u always go high as u can go when you have that little of shingle overhang.

What size and type of screws?

They have a t connection? One where it goes 3 ways?

Very hard to install the corner pc not recommended

There weren't any screws on the drill when he installed the downspout adapters. But gotta make it look easy LOL

I am trying to install a similar system, using the 2x3 rectangular downspouts. The system is exactly like the video shows. I got all the pieces together at the store, the downspouts, the brackets, elbows, short pieces, clamps, etc. Did you notice I left out one item? Apparently, these stores (Home Depot, Lowes) don't realize the downspouts are the MOST important part of a gutter system!!! Because neither had that downspout adaptor section for the 2x3 downspouts that go in the gutters shown. The system shown in the video was the one I wanted to use because it matches the rest of my house gutters. They had those downspout adaptors for ALL the other size system, though!

where do you find women that will carry the ladder off the jobsite at the end of the day? holy shit that is a 1 in a million girl, every one I know would be in the car with the AC on full blast staring at her phone as soon as we moved onto the downspouts

From where can I get it please ?

where do they sell the two piece hangers? Been to Lowes, Home Depot, Menards, Amazon, and ebay.

I have no fascia board or eves (which is why I need gutters...) any advice. Many houses in my area are the same.

Do you have the part number or information regarding the two-piece hook (hook and spine) system dovetail attachment?

What happens if you have a metal drip edge, is the gutter to be installed under the drip edge. If so, what about the "drop " they are talking about?

The Drop Outlet eyelets for the screws are show level with the guide line. if you are using leaf guards, should the eyelets be lower? If so, by how much?

Super video thanks

Super video thanks

A good video but these products are not standard Amerimax materials and your store may vary widely. For example, the colored vinyl is significantly different in its attachments than the white in our area. Watching this video will give you information hardware stores will not have on hand. Thank you for that.

What about corners??? Are you serious?

The video is informative and well done, but lose the music.

Perfect information! Everything went together well and now after a rain... not even a drop of water out of place. Thank you!

Didn't even have to strap them down to the minivan

Thanks for you help and instructions.

👍👍