Like with most things - it depends. Waterproof is really a spectrum of how water-resistant the fabric is. Some of the things to consider is how deep is a partial submersion for you, and for how long? Are you mostly working indoors or outdoors? Generally speaking, the high denier count on the nylon coupled with the polyurethane coating makes the Tingley Orion practically waterproof for most applications. Where this gets tricky is the deeper the water you're wading through, the higher the water pressure you're applying to the overshoes. The polyurethane coating helps a lot in this case, but itself is susceptible to cuts and abrasion, and can eventually break down under prolonged exposure to sunlight. We suggest cleaning with cold water and mild detergent, wiping off excess moisture on the surface, and storing them in a cool shaded area after each use to prolong the life of the overshoes.

Hi Carine, Glad you enjoyed it!

Hi there - that's a fair question to ask. I think there are a few good reasons to consider upgrading to the 0970-20 unit, but if we're strictly comparing CFM and inches of suction and hinging the decision on that, I'd say it might be tough to justify the price difference (keep in mind the 0970-20 goes on promo every now and then). Personally, the two power modes, PACKOUT compatibility, and brushless motor are the big pluses, which alongside the improved suction really make the case for the 0970. Hope this helps!

This can be a tricky question to answer as everyone experiences cold weather differently. Baffin has generally moved away from specific temperature rating on many of their products in favour of their "Real-World Tested" scale where they bring products into different environments and test them to see how they do. The Baffin Ice Monster are Northern Rated, which when you compare it to their other levels is roughly a 2/5 on their real-world testing scale. Considering how cold it can be in Alaska, and the consistent exposure to snow, I would say you'll likely want to look for a taller boot with a thicker liner that is either Arctic Rated (4/5 on the RWT scale) or Polar Rated (5/5 on the RWT scale). Here's a link to Baffin's website that offers some explanation on each rating, and you can drill into more from there: www.baffin.com/pages/community#shopify-section-page-community-ratings I'm not sure if you're in the market for plain-toed or steel-toed boots, but here's a list of Baffin polar-rated industrial boots that should keep you fairly comfortable in your work environment: www.baffin.com/collections/industrial-insulated?pf_t_cold_rating=POLAR+RATED. I really hope this helps. Good luck with your search!

Baffin has generally moved away from specific temperature ratings because everyone experiences cold differently - what might be warm for you, may be inadequate for somebody else. Instead, Baffin uses what's called Real-World Tested (RWT) Cold Comfort Ratings. The Baffin Ice Monsters are Northern Rated, which they say most people would feel comfortable wearing between 10C to -10C. Given how cold and wet Alaska can be, you would probably want boots with higher RWT Ratings, such as Baffin's Tundra or even Arctic Rated Boots. The Baffin website's search functionality can narrow your search with those specific ratings to help you make your choice! I hope this answer helps, and good luck with your search!

Good question - it depends. The Baffin Ice Monster Winter Boots are waterproof up to a certain point. Because it's a lace-up boot, water can start seeping through the boots when water gets above your ankles. So long as you're not trudging through deep puddles in your line of work, the Ice Monster should work fine for you. Otherwise, if you'd like a completely waterproof pair of boots, we recommend checking out Baffin's Icebears! We've done a video about these a few years ago, but they remain one of our best selling boots: kzbin.info/www/bejne/r3OUmn6fnNuYg9ksi=r9lFMk_Wt5U2F5NS

Hi there, sorry to hear about your ankle injury 😓 The Baffin Ice Monster does offer some fairly strong ankle support, and there's the added benefit that they're a lace-up style boot so you can really fasten them as tight as you need to your foot which should help as well. All that being said, they are mostly made of leather which can soften and flex over time, so the overall fit and feel of the product will likely change as you wear them. If you're able to find a local retailer that carries them, we would recommend you try them on and see how they feel before investing. Hope this helps!

@@macmorindustries thank you very much!!

Hey Tommy, Thanks for checking out the video and leaving a comment! You're correct that this hard hat does not have ventilation which grants it a CSA Type 1 Class E rating. MSA does make vented hard hats if you aren't needing any sort of electrical rating for the job. That said, another solution you could look into which might help is to get some sweat bands that wrap around the inside part of the suspension which goes against your forehead. We do recommend rinsing/washing/replacing your headbands on a regular basis to avoid further skin irritation.

Hi there! Yes, there are different versions of the batteries that exist depending on the batch and generation of the product. Some of our heated products have the batteries you've mentioned, and some have the bigger silver ones shown in this video.

Same I got this jacket today and gray flat battery and Monday suppose to be 5 below where I live gonna test it out

Glad we could help! Sounds like your previous unit served you well 💪

Thank you for your input, Jay! They're one of our best-selling boots for some of the reasons you've listed 👍The build quality is fantastic and they hold up in the toughest environments and job sites. Glad to hear you've liked yours!

Thanks for the feedback! We didn't know that was an option either until we started putting the video together.

That's a great question with a bit of a complex answer. Since these are overshoes, the overall warmth you can experience with them will depend on the footwear you pair them with. With insulated work boots and thicker socks, you should feel comfortable in temperatures below -15 Celsius. Which leads us to the next complex answer regarding whether these are warm enough to wear while working outside in the winter - this largely depends on how cold it gets in the winter where you live. Are we talking -10 to -15 Celsius, or closer to -30 to -40 Celsius? These covers are primarily designed to shield your footwear from winter elements with its nylon and PU coated outer shell and its Polypropylene foam lining. They're also helpful to allow you to walk in deeper snow than what standard boots or shoes would allow you to do comfortably (14" high with additional 6" gaiter for some significant coverage). If you happen to live in Canada near one of our stores, we're currently offering a special deal on these during our Black Friday event until the end of this week. You can check out our website for details. Hope this helps!

Thanks for the feedback! With so many channels covering Milwaukee tools, it can be tough to present unique information. We definitely try to put our own spin on stuff where we can 😄

Hi Allen, thank you for the kind words. We definitely do our best with these reviews and it's always nice to hear that people find them useful 😄 Enjoy the new unit!

We discus this more in-depth in our blog. Check it out: www.macmor.com/blog/milwaukee-shop-vac-ff

Hi there, sorry to hear you're having trouble mounting your light on the tripod. 1) Remove the screw hole cover on the top of the tripod 2) Locate the mount adapter piece inside your light box. It is a piece with a 1/2” threaded end and a steel rod end. 3) Twist the threaded end into the mount of the tripod and fit the light onto the steel rod If you have any further questions let us know!

Hi @karennaramore9578, I'm not sure if these are available at retailers like Home Depot or Lowe's. With that said, MSA has a distributor lookup tool on their website where you can enter your location and it'll help you find the local MSA sellers for PPE near you: ca.msasafety.com/where-to-buy/ppe The link I provided is for Canada (our market region), but they have this feature in other regions as well - you can start by clicking on the flag in the top right corner of the page and click switch region, select your applicable market region and wait for the site to refresh, then scroll to the bottom and there should be a "find a distributor" link of some sort. Hope this helps!

So you guys are saying that a black hard hat will keep me cooler

I agree. With close to an hour of runtime on an 8.0amp battery, it can get challenging to keep it going all day if you need it.

Hi Boris, Love the passion you have for this other product! Respectfully, our channel covers products that are intended for the Canadian market (which in many cases can be applicable in the US as well). Unfortunately, we couldn't find much information on the Libus hard hat you mention, and from what we were able to find, it doesn't look like the hat meets CSA requirements which means it wouldn't pass Canadian standards for Workplace Health & Safety. All that aside, the MSA V-Gard is a great hard hat that we’re happy to stock on our shelves.

Hi Real and Reality, there are various manufacturers that will claim to have ANSI level 5 puncture resistant gloves but in the case of hypodermic needle resistance or needlestick testing (ASTM F2878), you definitely want to read through the specs and make sure you're seeing the rating you need. Upon closer examination, you might find that certain ANSI level 5 puncture gloves are only rated for level 1 when it comes to hypodermic needles. As far as suggestions go, Superior Glove has the TenActiv STAGLXPB and the Clutch Gear MXHV2PB (the second style number being different than the Clutch Gear product we featured in this video), you can browse these on their website if you'd like: www.superiorglove.com/products/puncture-hypodermic/. Outside of the manufacturers we typically work with, I believe Hexarmor and MCR safety also make some products with good hypodermic needle protection that you could look into. Hope this helps!

Right on uNo! Our customers really like these glasses, so I hope you end up liking them also.

@@macmorindustries awesome, I'll let you know tomorrow when I receive them 😎👍🏾

Wow I am work today wearing the blue lens version of these safety glasses at work today and I must say, I forget I'm even wearing them! They are comfortable, the blue lens has a calming effect on me and they look awesome, they don't even fog up while wearing my mask like the cheapo ones I previously wore. I highly recommend these and the price is 👌🏽already have coworkers asking where I got em 😎👍🏾

@@uno3863 that's great to hear uNo, we're glad to hear these worked out for you. Completely agree that the price for the value is solid. Enjoy!

Thanks for the feedback - glad you liked the video! The nice thing about the Hypershocks is that they're a great spec that doesn't break the bank, so we feel the value for the price is definitely worth a try. RE: your question... usually, workers who wear prescription glasses on the job will either need OTG (over the glass) protective eyewear or will get sideshields that they can attach to their prescription glasses for additional protection. At the end of the day, it's up to the employer to do a risk assessment and mandate the safety equipment accordingly. Employers also need to evaluate the employee feedback they get about products - if lots of feedback is received about PPE being uncomfortable or not ideal for the work at hand, it's in their best interest to work with their supplier to find a more suitable product. Otherwise, employees will likely stop wearing the gear which greatly increases the risk of injuries.

@@macmorindustries Thanks for the reply. I actually got me a pair of these. And they're great. I love them. And the place I work doesn't offer nothing.

@@macmorindustries Thank you for the fast response. I will look into these. Thanks again. GOD bless.

@@macmorindustries Also the gloves you recommend look bulky. Are there any that are less bulky but protects just as good or better?

Hi Tommy, thanks for reaching out. For this application, you will want an ANSI-rated Cut Level 2 or 3. You might also want to consider a glove that has puncture resistance, but these can become quite bulky. These gloves here are ANSI Cut Level 2: www.macmor.com/products/ppe/hand-protection/cut-resistant-gloves/atg-44-3745-maxicut-ultra-gloves If you want more information on these ratings we have a ton of resources about gloves at: www.macmor.com/blog/ppe/hand-protection

A lot of our guys do the same! Glad to hear you enjoy them!

Hi Dave, Baffin is aware of the issue and has taken steps to fix it. In the meantime you may want to consider a warranty claim.

​@@macmorindustries Mine are doing it now but they are 3 years old. I will buy these again. I literally wore them at least 6 days a week from dec to May. I operate a forklift in a freezer, they keep your feet warm. Especially with a pair of bamma socks on.

@@shanefaulkner8586 Sounds like you got some good mileage out of yours which is great 👍 they're definitely the go-to boots for a large portion of our customers, without question.

@@macmorindustries Great mileage.

Hi Malach, thanks for reaching out. Generally speaking, the Punkban products from Superior Glove that feature ANSI Puncture Resistance level 4 or higher would be recommended. Keep in mind, some gloves like the Punkban Clutch Gear mechanics featured in this video are also rated for hypodermic needle resistance (ASTM F2878), but only on the thumb and index. Hope this helps!

Thanks for the feedback G - this was honestly a spur of the moment joke for the team, I wouldn't read too much into their technique haha

Really depends on the application, but in a traditional sense you could say an impact-resistant glove with some cut and puncture protection is pretty rugged.