Electronics TinySine

Пікірлер

@alap1983 Ай бұрын

Most of the people who came to this video want to know how to reduce or eliminate the annoying "Bluetooth Mode", "The Device is Ready To Pair", "Paired" and other high-volume messages.

@electronicstinysine8110 26 күн бұрын

Different board have different procedure to disable the audio tones. It seems you have TSA2300 or 2400 in hand. Please read this tutorial: www.tinyosshop.com/index.php?route=information/news&news_id=102

@HAMMER_2.2 Ай бұрын

I just ordered one!

@hemants.1039 2 ай бұрын

it's not stereo. ... just amplification.

@electronicstinysine8110 2 ай бұрын

It's stereo

@NguyenNam-tu4wk 2 ай бұрын

I applied with qcc5171 without success because of file 512x.sdb please help me

@수리공방 3 ай бұрын

program . download link please

@vinhvu6314 4 ай бұрын

cmd của mình cứ báo lỗi vậy

@CarterHickman-ce6uh 6 ай бұрын

Is there any way I can program the DSP to switch between playing the bluetooth signal and playing the hardline audio signal? In my application, I have a "interruption" that should interrupt Bluetooth signal on occasion. This interruption signal is sourced from a hardlined media player. Is this possible?

@BADAB0ING 8 ай бұрын

Where can i get the *.sdb file for the TSA8804 V2 ?? - The 512x.sdb dont work with the V2 of the TSA8804

@vaf3614 9 ай бұрын

what psu did you use?

@BADAB0ING 7 ай бұрын

i would use 36v 16.6a - 600 watts

@RandumShit 10 ай бұрын

please make a video where you remove it's irritating voice prompt

@johntlofton 11 ай бұрын

What model was used in the video? The photos I see on your website either show no USB port, or one located on the Bluetooth receiver, like the TSA8802B.

@曹杰-x4e 2 ай бұрын

It's TSA8804

@hoangkhang096o6 Жыл бұрын

How to rename Bluetooth with acpworkbench??😢😢😢

@jagveerprajapat8602 Жыл бұрын

Key.txt file can't open key.txt and can't create same address text file only move file

@Willibald_FPV Жыл бұрын

same here.

@santowalterscaramella6323 Жыл бұрын

IN WUZHI AUDIO - ZKTB-22, REPEATED TIMES THE INSTRUCTIONS WERE MADE. BUT THE BLUE LED, REMAINS BLUE, FOR ANY TOUCH(S). Grateful for the attention.

@geosplayground1802 Жыл бұрын

Been looking for this item since before

@kuronekosan2830 Жыл бұрын

Can this do basically the same thing as what an mini dsp can do for subs ? Like phase correction? Setting crossover for mains also ? Set infrasonic filter ? Peq for sub ?

@abaddj7295 Жыл бұрын

Is it mono how do I tell which speaker is right or left do I have the ability to tell which speaker is right or left what's the maximum amount of slaves that you can have on one master

@geosplayground1802 Жыл бұрын

Link please

@pilotdog68 2 жыл бұрын

If you have 3 or more paired, can you set them as either left channel or right channel?

@mfarmarco 2 жыл бұрын

Are there any boards that have more than 1 knob on a wire like the wondom boards that have 4?

@prashikgaikwad4741 2 жыл бұрын

Can we change voice of bluetooth speaker too ?

@uhp2804 2 жыл бұрын

And where to get the tool?

@Ljrreyes 2 жыл бұрын

How to remove the talking example. The bluetooth device is ready to pair

@Pro.16 2 жыл бұрын

Car bt usb ?

@gsmradhemobilesolution7279 3 жыл бұрын

What is name bt change tools

@haidangho143 9 ай бұрын

Is BlueSuite 2.5

@leoanglo6176 3 жыл бұрын

Product Link please

@ColinWatters 3 жыл бұрын

Got one of these to play around with the DSP function. Arrived today and within an hour we're programming it to suit a home made base speaker. At normal listening volume it's drawing just 2.5W from my bench supply. Got a nice case waiting for it. At time of writing this was the only affordable 2.1 Amp with DSP programming we could find. Recommended.

@xNickerishx 3 ай бұрын

I've built a bunch of boomboxes with the amazon amps... How do you like the samplifier.. It's been on my radar to try

@ColinWatters 3 ай бұрын

@@xNickerishx We got it mainly to experiment with the DSP. Was quite easy to configure it into a 2+1 set up with filters and mixer to produce the mono base channel. It's about two years old now and there might be better versions out there but we haven't looked.

@littlebigadventures 3 жыл бұрын

Hi I have the TSA6016 and the microphone audio is very low can you make a video demonstrating the TSA6016 with microphone so I can see whether my unit is damaged

@overbuiltautomotive1299 3 жыл бұрын

i hope some one can answer this with the software can i filter sub sonic filter unwonted low frequencys from a subwoofer as i am building a 2.1 modified boombox and the O.E. subwoofer is small two 3 inch in a ported box and can not take the low stuff like 15 hz to say 30hz just a an example ?

@ColinWatters 3 жыл бұрын

I hope so because my son is looking for something to do the same. Let us know how you get on.

@paulhamacher773 3 жыл бұрын

totally possible :)

@overbuiltautomotive1299 3 жыл бұрын

@@ColinWatters yes it will do sub sonic filtering a fellow answered me on anther video

@ColinWatters 3 жыл бұрын

@@overbuiltautomotive1299 Thanks for the replies. We've got one on order and have been playing around with the default program in SigmStudio. Great fun.

@ColinWatters 3 жыл бұрын

@@overbuiltautomotive1299 Arrived today. Works well.

@caturwahyu2969 3 жыл бұрын

link for buy please

@roberttrouw439 3 жыл бұрын

What app do you use?

@tehpunisher4568 3 жыл бұрын

I was gonna say "umm isn't that a battery there to the left?" Then I realize you were demonstrating how the board reacts when it has 0% hahaha

@andresdefreitasserrao1493 3 жыл бұрын

I wanted to check the following: I am working from a PC that has Windows 7 32bits and I was able to run the "PSTools" without problems and change the name, with "CSR Universal Front End" I have not been able to configure it, I get the following error "The transport USB SPI (00547) cannot be opened. Ensure that the device is connected and enabled." If you can help me I would appreciate it. I am working with this CSR USB-SPI Programmer: www.tinyosshop.com/index.php?route=product/product&product_id=876 www.tinyosshop.com/index.php?route=product/product&product_id=874 This is the module that I am trying to configure: www.tinyosshop.com/tsa2300

@cbeausoleil 3 жыл бұрын

FYI… The LazyBoneDimmer app you need to download for iOS is the one with the blue icon, not the green one.

@tehpunisher4568 3 жыл бұрын

How many of these amps can we chain together

@robbielex 3 жыл бұрын

True Wireless Stereo = 2

@tehpunisher4568 3 жыл бұрын

@@robbielex yeah I saw. I asked cause I saw other amps on their website that are capable of chaining multiple. Hence why I asked

@theewelder 3 жыл бұрын

@@tehpunisher4568 correct,wondering the same.....2 seems limited........4 is ideal....... "jbl speakers" bluetooth and " daisy chain" up to 100 speakers?

@tehpunisher4568 3 жыл бұрын

@@theewelder huh how funny that you respond when I'm trying to get this project back up haha I want to get these guys's tsa6175 and get 3 of em. Get 2 regular left right amps and 1 sub amp and batteries with bms. Then have a true wireless 2.1 so I can take where I want haha. Ideally up camping with my projector.

@simmielp1900 3 жыл бұрын

@@tehpunisher4568 All the documentation is on their website, you can effectively connect more than two of them, but if your project needs more than 2 modules, the TSA2300 if more what you'll need. See if you find what you want here : www.tinyosshop.com/index.php?route=product/search&filter_description=true&filter_sub_category=true&filter_name=multipoint

@tehpunisher4568 3 жыл бұрын

Hello! I've seen there are a few wireless stuff here. My question is if there is a system like this that can multipoint (3+ points) using aux as input. And if I wanted to bluetooth to that

@electronicstinysine8110 2 ай бұрын

Please check TSA8804 board.