just redid my stampede to a stampede hoss

Mine broke same place.

I'm in the camp where they need to come ready to rip.... They kinda are but yea you gotta set up suspension spring collars.... They should come with thicker fluid in the shocks from factory..... Also diff fluid.... They say they use 20 mill in the center..... It's absolutely not 20 mill 😂

Does the esc mount also work for the QuicRun g2 esc or only the max10?

You were why some people can't have nice things!

I got mine going today for the first time and it's a beast

Got my v6 and filed down the mounts on the chassis just a LITTLE bit and can do any amount of bashing body has never come off, doesn’t matter how muddy or nasty the body gets or how dirty the pins and clipless mechanism gets comes off first try every time, need to go slow and have patience though if you do it and you can get it perfect. Just my 2 cents. Worked great for me

Mip makes a ball end speed tip. They work great for those off-center screws.

Just installed mine, you installed this one on the outcast but for the Kraton the body mount is in the way. You either have to install the body mount first(and not be able to screw in the t2t mount) or just run one body mount screw. Do you have any alternative or has anybody mentioned this before?

We need aluminum body clips because of hard landings the plastic ones break

The only real thing needed for these cars is to upgrade the front diff tower to an aluminum one. Over time the center diff will heat up the stock plastic one and melt it. When this happens the diff is able to move a little bit causing bad gear mesh. As far as bumpers go, get RPM and never worry about it ever again.

Nice to see a real review that’s not biased.

Doesnt need any bumper add-ons. The bumper is the most flexible part on the V6 and is very good. A wing mount, wheelie bar and hood protectors is all this RC needs. He makes great products, however, dont spend on unnecessary parts.

Rogue 1 with buggy tires buggy body and a wing. Cool buggy though. Not sure why they didn't through bolt the rear shock tower with a bad landing will rip the shock tower right out of the diff case. 4 longer screws and nylock nuts solve the problem. Great little buggy.

Imma need one !!

Slide the heat sink back a little bit away from the wires

If you can get them for a better price I might have an excuse to buy one. I just bought two new RC’s and that RC8X(that I still don’t know how to use)so the wife is giving me those looks 👀 bro. Let me know Tyson

Smart little piece.. Can see those selling very well 👍🏻

One more thing, if you plan to enjoy this truck outside of testing it for product development, run or order a 5S lipo if you don't have one already. Mine just came in, and I'm going to test it this Friday, I believe you be able to keep power to the ground more and still have enough power for flips. IM always trolling KZbinrs, especially traxxas shills, you have some of the best RC add-ons to ever hit the market place bro.

Arrma's 6S's aren't for everyone. Some people can drive them, jump, and do flips without breaking shit, and some well, can't hold correct throttling, flipping over, traction rolling, and break stuff by not being able to land correctly consistently. I have the black V6 and it's now my favorite 6S RC more so than the K6 EXB V2 and even my outcast 8S V2. If you can't handle the violence go down to 4S son 😁😁😁. Oh yeah, there are no weak spots on this truck I have discovered with 3 packs run through it when driven with common sense, so I'm not buying anything you make for this truck, and I have purchased several items from you LOL.

It looks like a mini Corally Syncro4 haha

My problem has been parts its a minimum 2 weeks to get anything from them and you pay for shipping if your lucky the part will be on Amazon. They make very solid rc's I do wish the esc could be programmed the brakes are usually way to strong but overall its a good brand cant wait to see if it survives your first run 😆😆

It hauls-ass, that's for sure!

Just got back inside from very first test bash with the Rlaarlo Rally, very impressive vehicle! And Last week ordered the little buggy also, with no experience with rlaarlo at all at that point😅 but now after a quality time with the XTS I'm super thrilled, about that car and also the future buggy🎉

Hey Tyson

I've recently bought the SYNCRO-4 (my 1st 1/8) and my centre diff is getting very hot! The drive cups are untouchable because of the heat & the bearings have massive amounts of slopp after 10 runs, probably from the heat? I've swapped diffs from front to rear and it still feels like a RWD? Not sure what to do?

She ran great. Yea with the cold plastic definitely becomes more susceptible to cracking in a crash.

wow, that clipless system looks frustrating as can be

I’m torn between this and the 1/5 scale OutKast/Notorious. Awesome rides!

Just curious and i know this isnt about the arrma but is there any plans for u to make stuff for the redcat valkyrie? Theres a few possibly little things id love to have for my truggy. Wheelie bar in the blue, wing in blue, maybe the bumpers like as im looking at it i get theres probably not a whole lot that could be made for it but idk id just like something different lol

well, it actually took a lot of abuse in that cold weather. It was obviously gonna break with that harsh bashing on freezing temperatures.

My Notorious V5 is my favorite RC and a lot of people are like, what? Here’s why… I connect real well with the RC I can speed run mine and actually keep the front end down!!of course I have it all Vitavoned out… the whole truck is built!!

I like it, like a 6S outcast.

That ones pretty tough it did take alot of abuse

Awesome job buddy again , love the Notorious but u felt that I had to skip this one due to the body and the fact that I tend to upgrade all my trucks as that’s a decent portion of the hobby for me . Don’t get me wrong though Arrma did a awesome job with this truck . Stay awesome buddy Chris 🤙🤘💪🚀👊🫡😎🤩

Awesome vid! I have the V5 and its a beast, altho its making me want a "normal " Monster truck since it just wheels and back flips all the time.

Good video nice jumps it definitely can take a beating the body system wow what a pain it is looks like a good stunt truck though thanks for the honest testing of durability as always with your videos

The clipless system is difficult you press down but the body needs to come up. As you know you can thin the center diff fluid to keep the front down but what fun is that lol cant wait to see what you come up with and yes it needs roof skids ohhh my poor roof

Awesome ! The yellow front bumper spring and blue rear will look awesome . A y yellow parts will look awesome imo contrasting against the dark colors . 😂 that’s what full throttle looks like off a kcrc , nice dude . Happy holidays

Shes a hand full on 6s lol

Did you get your license from a cracker jack box? 😂

Awesome video love driving in the snow as I live in northeast we don't get much snow on Cape cod but we got plenty beach sand and Mini Maxx is a blast on the beach 30 degrees and going today with Maxx and mini Maxx maybe you should make some green nerf bars for Mini Maxx thanks again for great videos and 3d printed parts

Snow bashing looks fun. No such thing in SC!

But when I am driving who knows 🤣🤣 you and that curb lol glad it didnt break I dont understand that white stuff we dont that here 🌴🌴🌴

When Tyson says uhh ohh it's going to be good lol

I was looking at new vids with the v6 Kraton, and it does standing backflips better. I wonder if the new software settings on the ESC is the trick here... I have the exb as well but couldn't do standing backflips

I don't know why but I couldn't find the like for this video short? Usually it's right there to hit?

I have been thinking about buying one of the 223 line to drive with my kids. Was thinking Fury, but this Typhon looks fun.

She was flying man 🍻

Nice video