It’s blue. But it should look familiar.

@@oftenwrong2000 I think he was referring to my red pad. Also thanks for posting another of my defeats for all to see. 😂😂😂. I suppose it’s revenge for that classic Street League start after all day on 6S I posted of you lol 😂 😂😅

@@innerspacealiennotice I didn’t post any names. So there was no public shaming.

Sure. Go ahead.

The camera has an internal LIpo battery.

...Come to find out. I was wondering why is was heavy and took it apart an hour ago. I cut the battery out after I figured out how to fashion a power cable to match the camera connector with the RCA-type power cord/ plug that came with the X-8 camera.

---- I might have kept the internal power source but it now makes it more weight friendly for the X-5c which is why I got the camera. (did not know it required a special mounting plate).

+Michael Workinger I use that camera on the X5C as well. I took off the landing gear and the battery bay door. With that configuration I can have the FPV camera on its belly, and another lightweight camera on its top to record the flight. I am dissatisfied with the FPV cameras recording capability.

--- 2 thoughts, ..you can chop the landing gear down to 4 low profile individual legs. Works great. ,,,, A proper Class 10 4gb micro SD card might fix that issue

Double sided tape and twist ties.

Can you make a video of showing how you did it please?

+Revolutionist The antenna for the receiver is great a panel antenna. The one on the camera is ok. but it is soldered on. I guess you could solder a different antenna on. The camera stopped working for me. It wont charge. However I still use the receiver screen. With different transmitters. Still works great.

+oftenwrong2000 You may have already done this but if not, Do the Transmitter antenna range mod asap. I did the transmitter and quad range mods and I have not lost signal yet @ 200meters. I also have the Add on FPV system. My cam battery was not holding much charge either so I just went in and swapped out the battery. It's a 100ma just like you find in a Cheerson CX10. The quad does fly heavier with that set up so I lightened it by removing prop guards, battery door, I mounted cam using Velcro and a wide rubber band. Surprisingly I eliminated the jello I was getting from the cam by doing that. I also added these: www.ebay.com/itm/4pcs-Landing-Gears-Landing-Skids-for-SYMA-X5SC-X5SW-Quadcopter-Drone-/291694828656?var=&hash=item43ea5ddc70:m:mmfINixyQq8OBWVPFn6DSxwAnd these colored props for better orientation: www.ebay.com/itm/371498512574?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITBoth come in (4) different colors. That FPV system I got here inside of three Bus days $55+ S/H $9: www.ebay.com/itm/401017857418?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITHope this helps. I'm going to try and solder on a clover leaf Antenna to the cam next. I'm getting out pretty far but I think it can do better. Also running Turnigy 750Mah batts, and some no name 800Mah I got off ebay. Best part about this quad is if you loose it your not out big money, But I have been very lucky so far. Good luck!!!

+TheSeigneuAnubis The battery on the screen lasts about 20 minutes.Im not sure what you are asking in your next question.The camera can not be powered by the drone.The plug out goes to the port of the Syma X5 and X5S. To start and stop the recording, no power.I don't know what the db of ether is.Yes, you can record from an SD card.I hope this helped.

+oftenwrong2000 thank you, you are the first to me as much info. do you think that we can change the battery connection of the camera?

+oftenwrong2000 the batterie camera and screen is in 3.7v ?

The battery is soldered to the camera. You could change it or power it from another source but I don't think it would be worth it. The Screen is the stronger part of the product. I have stopped using this camera, but still use the screen. I think the battery is 7.4 volts.

+oftenwrong2000 if I weld the battery on the camera, you should think its going to take 90min? www.adafruit.com/products/328

+Phrancis5 Since this video was made I bought the boscam T832 32 channel transmitter. Works much better than the camera/transmitter from the kit. But I can still use the kit RX.

+chasean robertson (Thumbs) 15 - 20 minutes on the camera. The screen lasts a bit longer.

+Unethical Rager Double sided sticky tape.

The camera does have its own battery. The screen doesn't fit out of the box on the transmitter. But it can be fixed on it with some double sided sticky tape.

The camera only works stock with the syma x5c and x5s. There is a mod to cross the wires and add a switch. Then you can start the camera recording before you fly. The camera quality of the kit so ok. But over all it's a great kit for the price.

+αγγελος αγγελοπουλοσ This camera does not plug into the X8C. I turn the camera on to see the transmission on the FPV screen. The FPV transmission range is pretty good for the price. 150-200 meters. I record the flight with another camera. On this flight an E-Flite EFC - 721 HD camera. Made by Horizon Hobby. The X8C can handle the weight of these 2 small cameras. At the beginning of the video I show how I they are set up on the quad copter.I hope this helped.

+αγγελος αγγελοπουλοσ it's an easy mod ;-) the camera has 2 wire's Black(ground) and Yellow (signal) the stock camera of the X8 ha's a jack you can use to do this mod ... ur not gona need the stock camera anyway ;-) desolder or cut the cable from the stock camera and simply solder Yellow to yellow and black to black(sometime's blue) just DO NOT use the RED wire !! thats the hotwire or the 1 that suply's power ...and that wil kil ur fpv camera ;-)

+takoza Thanks. Work's perfectly this mod with X8C and his 3,5mm jack. 1.- The original camera of X8C, has 3 wire's,1 red, 1 yellow and 1 blue. 2.- This kit camera has 2 wire's, 1 yellow and 1 black. Instructions: 1.- I cut red and not use, 2.- Solder yellow of 3,5mm jack with yellow on kit camera 3.- Solder blue of 3,5mm jack with black on kit camera When i push down one time button of transmiter i can record video and another one time i stop record and when i push up button of transmiter i can take a photo.

+LifeBoy 69 (lifeBoy69) Double sided sticky tape.

Upgrade? Yes! I have found a new pit to poor money into. You can only own so many volcas.

Yes. It has happened several times. But these are light trainer quads, so no damage. I do like the sound of the motors though. Such a roar.

Thanks for the feedback. It's nice to know someone is out there!

oftenwrong2000 You can count on me, when I have the time, I listen! I subscribed! :-))

That volca looks like a lot of fun.