Come do mine I'll pay you

Its 2024, any updates?

I commend you on your creativity and solutions!! Great to see!! Thank you for sharing!

That’s way too much work but I learned something. This song is through the head unit which is ridiculous. Once we become acclimated to these beeps they do nothing anyway but annoy us. There is no excuse for not being able to turn off door chimes. When I have the door open and I’m working I want to play the stereo like any American man would but it beeps so I have to keep the door closed. There has to be a way to take apart the head unit and disable this for chime crap. Now for the seat belt I just put an adapter in there so I don’t get that beep but I want my door to be open and not have to hear this damn ding sound. Whoever came up with that is an idiot

Dude just bye the correct tyre..... 🤷

Movie executive should take note, that on move gas fill sounds like a madmax scene that is definitely missing from the movie

Your dealer was ripping you off. now only are the labor rates crazy, the fact they wanted to charge you an extra hour for a service that it seems like 90% of the panel removal was already done and paid for by the spark plug job! thanks for sharing this.

What website for filter? What is the name, website & model numbers for hoses? Model number for MasterPro clamps?

This is my problem with dealers. They wanted to charge you an extra hour of labor to change a fuel filter. That’s right there with the maintenance you were needing with the tuneup to begin with now I understand charging a little extra because it is an extra step I get that but a whole Nother hours worth of labor for something that’s already right there is criminal And wonder why they get bad reputations

I've tried the folded paper towel trick and the extra thikness causes the filter door to pop open. There looks to be a bit of a bend to the door latch (hook) so I may have to buy a new door just so it holds the filter and paper towel "fix" in place.

Dragging the center stand lol I feel that, I have yet to do the rear shocks swap and so it drags whenever you go over the slightest bump while leaned over.

Other than looking completely ridiculous, it's completely ridiculous 😂

Maybe oneday..they'll come out with a one piece front cover assembly...so much easier 😂😂

PRICES ARE ROBBERY..DEALER SCAMS

Your are a VERY strange individual.

Remove filter. Works and tastes great. You may ask: But what’s in the water? But I ask you: What’s in the filter? When I was a kid I drank directly from a garden hose(no filter), as most kids did back in the day. No issues, as far as I can tell😁

I've got the '07 and I'm 6 ft and with the OEM screen all the way down the wind was hammering my head to the point of me getting dizzy. I like it at that lowest point because I can look over it a few inches. Does this keep the wind from hammering your head on the freeway?

TY KZbinrs! 😁👍🏾I had same problems w/ exact same replacement filter (no flow, weird sound, etc.), and paper towel trick worked. Glad there were so many comments on this, however the fact this is the 151st comment for the same doggone replacement filter model is ridiculous. Not cool Whirlpool/ Kenmore.😒

I use a tire iron

So your blinkers sound still works ??

Any update after a few months. Still happy with the Madstad? I’ve got basically the same 08 and considering this wind screen.

I live in Garland Texas. I would love to meet you and learn about your travels. I don't know any other riders in town. Is there a forum that you use to talk about scooters?

Cool ❤

What size tire did you used

Yeah.. Do not do this stupid thing to your bike... You will wreck out when your sidewall explodes. Its a car tire you dope.. its engineered to work differently than a bike tire. Your content will get yourself or someone else killed. Spend the $$$ on the correct tire.. don't be so stupid and cheap.. Thankfully this channel has very low viewership.

Very cool. Thank you.

The cables are on the right hand side. When you pull the cover off, you'll see them. And then when you push cruise control, you'll see it. Move back-and-forth might just be a small adjustment.

My frig uses the #3 filter and I had not been replacing the filer as recommended. Actually left the last one in since 2016. Some time in the last two years, the water dispenser would chatter when dispensing water so we stopped using it. (Sounded like the inlet valve chattering to me as the ice maker water valve did not chatter when the ice maker filled.) The ice maker continued to work and I could hear it when filling. This week we ran out of ice and realized that the ice maker had stopped making ice. I see that the ice maker water inlet sluice has a frozen plug of ice. Removing the plug did not help as a new plug developed over a week. I decided to order a new water valve to fix the abandoned water dispenser and hopefully the ice maker fill problem (this all might be the result of the 7 year old filter). Unfortunately, I did not test the water dispenser after removing the old filter when I installed the new water valve. After I replaced the water valve, the water dispenser dispenses water but at a slow rate without the old filter (15 to 20 seconds to fill 8oz glass). After about 30 minutes, the ice maker cycled and I see that the ice maker is full of water. Deciding to put in a new filter (I can't find the original PUR #3) I purchased the #3 every drop filter and installed it but it popped out. On one insertion attempt I heard a chattering and water flowing (possibly into the filter as none leaked out). With the filter installed and clicked in, I get no water flow at all at the water dispenser when I tested it. Removing the filter I get the 15 to 20 second fill rate. I put the Every Drop filter back in and again - no water at the dispenser. After dinner, I tried the dispenser again and water flowed about 4 oz into a glass and then slowed to a drip. I suspect that water is slowly moving through the filter and collecting in the cooling reservoir, I see other comments where it is suggested that the short pin between the water connections be trimmed back about 1/16 inch. I'll try putting in the old filer just as a test before I hack on the new filter.

WOW thats a cool bike

Hello brother, a question: can you travel in a Zuma 125 on the roads of the United States? I appreciate your answer.

Put some sort of forward pegs to help with the knee problem

I’d like to see you ride with the dog. Great set up.

I have the same problem. Tried all the suggestions. Nothing worked. Then I turned down the water pressure for the refrigerator and shazam that did it.

Looks well thought out,especially the exhaust,something many overlook

How much miles you got on urs?

I’m going to use the tip 2.0 by using a washer instead of paper towel. Paper towel tend to not hold its compressed size. This trick may damage the door over time, so be careful.

crank bearings are shot

What about eye protection. Your eyes last time swelled up like grapefruits

Cool, great report / review. It's a big positive to go Darkside on your Maxi-Scoot. I'm 8 months & 10,000 miles into it & all those fears & downsides are nowhere to be found. I WILL upgrade my size slightly from a tiny 145/60 R13 to a wider, taller 155/65 R13 soon. My calculations show it'll fit with about 1/4" gap to engine case / swingarm. Here's my initial video, and still put an update or link in my pinned comment: kzbin.info/www/bejne/r4TPfoGFgdqSjtE

My fridge takes the same filter and once it's in it makes a noise. I never heard a noise from a filter before. Also not filtering the water at all. Water runs fine without the filter. NEED HELP!!!

Ffhs2622msf model frigarater

What size car tire is and brand name are you using on the back of your Suzuki Burgman 650??

Man! I was so frustrated replacing the water filter everydrop1 that I have been using. Finally packing quarter-folded peper towel worked for me and water is dispensing with full flow. Thanks for this great suggestion.

Small tab on top needs to be trimmed its not fully seated

Like bro

Hard pass, agreed that the chime is horse shit loud though

4100 miles in 4 days!? Man, that's some serious riding! Great info on darksiding the Burg!

The skinny little stem above the 2 nozles, cut that in half. That's all I did and mine doesn't pop out anymore

Holy Shit! Finally, got it fixed-water wouldn't dispense and no ice. In my case it was the small pin on the end of the water filter (where the water inlet and outlet are) that activates the bypass(?). Anyway, it was too long. I snipped 1/16th off the end of the pin with wire cutters and that's all that was needed,,,,,,After buying a new water solenoid thinking that was the problem, tracing the water flow through the whole fridge, taking apart each connection to make sure the water would flow/no obstruction in the water line, and a few more things. BTW !!!! the water solenoid was $99 from whirlpool, $96 from another online parts store and $29 through Amazon for the EXACT same part-same brand, part #, same manufacturer. Thanks to whoever suggested snipping the pin a little and yes my whirlpool ice and water dispenser works without a filter in it. Thanks to all of you for your suggestions.

Good stuff. Just bought an Achilles 155/65r14 for the back. The shop that will mount it said they struggle with getting the Federal Formosa mounted. Also, when you remove the tire and wheel from the bike, does the caliper have to come off or could it be left on?