Just wanted to pop by and say thank you for all your videos, you are so generous and I have learned so much from you, thank you ♥
@RobertaRoseMeads2 күн бұрын
I am happy to do what I can. At the moment, hard to record like I use to.
@druidsongevergreens10 күн бұрын
Thanks for the video. Can you tell me where to buy these stands?
@RobertaRoseMeads2 күн бұрын
you may find them on eBay
@elseblom76819 күн бұрын
Which size are you making Roberta?
@RobertaRoseMeads18 күн бұрын
Oh gee, it was probably a 2X size.
@elseblom76818 күн бұрын
Thank you
@marthamckeon27826 күн бұрын
Your ribber videos are terrific! I just got one for my sk280, and most of the ribber videos on youtube are for Brother machines. Just wondering why you use P-3, instead of P-5, as manual suggests. Thanks for all you do!
@RobertaRoseMeads18 күн бұрын
I am not sure why I go with P3, it is the same as P5 but moved over a bit than P3.
@Iuliica26 күн бұрын
What are the settings on the serger, please? Many of us have asked but you are ignoring our pleas. So please respond to a legitimate question about what you are doing because you are teaching us. Thank you
@RobertaRoseMeads18 күн бұрын
Sorry, I am not ignoring anyone, it is just that I do not get to the comments here in KZbin on a daily basis. I forget what I had, but sure it was the straight stitch and maybe up to 6 in stitch length. Just in case I had to undo it.
@countkostakiАй бұрын
So if I am understanding this correctly - a full scale pattern means that the pattern is literally full size, half scale means it's been reduced by half size and 1/4 is literally a 1/4 size...... if we have the schematics for a full size pattern and need to reduce them by 1/2 or 1/2 size is there an easy way to do this....? Also, for the 1/2 size pattern do you only draw half of the garment on to the sheet?
@RobertaRoseMeads18 күн бұрын
You are correct. Well on the Silver Reed contours and radars, they use half and quarter scale. I use a pantograph (I think that is the name of it). You can see me using it to make a half scale pattern for the KR6 kzbin.info/www/bejne/ZqG6o6d9iNSdock If the link doesn't go right to it, it starts at 2 minutes and 33 seconds.
@terryrobinson44322 ай бұрын
Who fixes these machines.
@RobertaRoseMeads2 ай бұрын
may I ask what machine you have and what the problem is?
@butternutsquash232 ай бұрын
Thank you x
@RobertaRoseMeads18 күн бұрын
Thanks for viewing my videos
@jurkaolinga21352 ай бұрын
How can you dubbele the brackets.
@RobertaRoseMeads2 ай бұрын
I am unsure what you mean of doubling the brackets, please explain more
@jurkaolinga21352 ай бұрын
Connect two together so that you are not bothered by the rods and the knitting can hang straight down.
@maryking54252 ай бұрын
Would like to see other side as well but nice video
@RobertaRoseMeads2 ай бұрын
if I do thus again, I'll let that side be seen.
@dorisbeaty69692 ай бұрын
Thank you for this, was really helpful.
@RobertaRoseMeads2 ай бұрын
You're very welcome!
@SallyPerkins-c2g2 ай бұрын
❤ thank you! A great demonstration!
@RobertaRoseMeads2 ай бұрын
You are so welcome!
@starrleesimmons42912 ай бұрын
I have one and just love it ..
@RobertaRoseMeads2 ай бұрын
this is a nice little machine.
@foggylog192 ай бұрын
Could I just cover the edge of a seam with fabric I need to unpick? And sew it folded over with zig zag? I need to widen armhole on a cheap dog sweater and I don't care about appearance, would like to not waste my $9 by having it unravel though
@RobertaRoseMeads2 ай бұрын
you sure can do that.
@margaretfrost91403 ай бұрын
It’s great you’re doing these videos ❤ but can you please print off your paper patterns so people can buy them off of you. You can’t buy them anywhere please help me Margaret frost
@RobertaRoseMeads2 ай бұрын
I will try to get that done, but all I do is free.
@margaretfrost91402 ай бұрын
@@RobertaRoseMeads Thank you very much your so sweet and kind Margaret x x x
@margaretfrost91402 ай бұрын
@@RobertaRoseMeads You are so sweet and kind thank you very much you help so so much. My address is 140 Hallen Road, Henbury, Bristol, BS10 7RB England X x x x
@margaretfrost91403 ай бұрын
Can I buy off you the paper patterns for the kr10 knit contour please if you print off copies . I’m in England thank you and the instructions for the pattern
@fjord63603 ай бұрын
Thank you! Needed help fixing a friends cardigan
@RobertaRoseMeads2 ай бұрын
Glad it helped!
@dunniscrochetandknits72513 ай бұрын
Hi, how to you knit this without the magic cams.
@RobertaRoseMeads2 ай бұрын
you would have to do it as in Intarsia
@margaretfrost91403 ай бұрын
It’s great how you show us how to use the KR10 I have KR11 but no paper patterns I have try to buy them but nothing anywhere could you help what to use please I’m at a loss
@Grova4 ай бұрын
Could you do those decreases with a lace carriage instead of all the manual transferring?
@RobertaRoseMeads4 ай бұрын
You sure can, that would be easier. Just use the appropriate card for it, or select the needles you want.
@nedraiwerks45044 ай бұрын
Hi, I recently acquired an empisal knitter but it doesn't have the cast-on braid. Is there a way to make your own?
@RobertaRoseMeads4 ай бұрын
I have been meaning to do something like that. If you have any woven material you can pull some threads out sideways, it will be exactly the same. But you can also make a cast on rag.
@carolcook80294 ай бұрын
Hi. I have enjoyed your lace knitting. I seem to get my yarn cought behind the posts. And it drops stitches. Would you know what lm doing wrong? I have a 580 knitting machine
@RobertaRoseMeads4 ай бұрын
I will get the yarn behind the gate pegs from time to time. I am not 100% sure, but believe the tension is loose. Lace also needs more weights then normal knitting, so try putting more weight on the work and see if that helps with both problems.
@carolcook80294 ай бұрын
@@RobertaRoseMeads l recently changed the wool bar. And tightend the tension. I have not had a problem. I can happily say it's knitting well. Yeah. And thank you 😊
@carolcook80294 ай бұрын
@RobertaRoseMeads and also l have looked at the gate pegs. Some were a bit crooked. So l straightened them. I'm very happy with no problems so far. Thanks again
@ninavolante2874 ай бұрын
Hi! Can you, please, help me with an important question? I really need to know ASAP if a sr150 ribber (the ribber for the sk150 model) will work normally on a sk155 machine, or not ...i have a sk155 in very good conditions, but all the ribbers i've found here in Italy were in BAD conditions; now i've found a good sr150 ribber, but i don't know nothing about the compatibility ...can you help me? Thank you very much 4 any help, Lisa (from Rome, Italy) 🤗
@RobertaRoseMeads4 ай бұрын
Sorry, no the SR150 will not work on the SK155, at least from what I have read. I never had the SK/SR150, so not 100% sure.
@Joanacortesart5 ай бұрын
What can i do to remove a very stuck carriage 😢 I m Trying everithing I Can think of, it’s stuck on the bed and it hás no yarn , Can someone Help me ? Tk y 😊
@RobertaRoseMeads4 ай бұрын
Sorry for the delay, hope you were able to get it unstuck. I have been away from my home here and there, so not doing much on my site. I remember once I had a stuck SK155 carriage. I had to take the sinker plate off of course, then I noticed that 1 needle was the culprit. I took needle nose pliers and wiggled that needle until it came out, then I was able to move the carriage. Come to find out, that was not a needle for the machine.
@elssmit1465 ай бұрын
Thank you, this is very helpful information. 😊 I will make my self a card, with you’re help 😊😊
@RobertaRoseMeads4 ай бұрын
Thanks, I do miss my push button machine, my ex will not allow me back to our house to get my belongings, but his Karma will get the best of him for sure.
@isabellaegan66095 ай бұрын
Hello! Thanks for this video. Do you have details on the pattern for a saddle shoulder jumper?
@RobertaRoseMeads4 ай бұрын
Yes I do! But for some strange reason, my site is not available. Not sure when that happened, but trying to check on that. But if you need a pattern, you can email me at hobbyknitter at gmail dot come
@rivii25775 ай бұрын
and exactly for this type of process how i change yarn if some gots finished?
@RobertaRoseMeads4 ай бұрын
Do you mean, when you finish up 1 color yarn? What do you do? If this is it, I would suspect to cut the yarn off to the side, and when all is done, weave in the loose tails.
@TracyKMainwaring5 ай бұрын
It would be nice if you showed what settings you're using. I know my SK155 can't do tuck in one direction anymore, but it's been so long since I used it, I don't even remember what the set up was. I'm following the manual, using punch card 1, and it's tucking fine.
@RobertaRoseMeads4 ай бұрын
Sorry I didn't show that, I'll have to remember to do that next time.
@MoKatarn8135 ай бұрын
Which model of sewing machine are you using?
@RobertaRoseMeads4 ай бұрын
This one happens to be the Kenmore 19001.
@rivii25775 ай бұрын
if i want to do scarfs with vertically pattern, i just need to program one figure? or the total patterns that i want, maybe just one? and the machine automatically restart the pattern?
@RobertaRoseMeads2 ай бұрын
if depends on the pattern you want. you do only need the sts and rows repeat to input.
@DonnaL015 ай бұрын
Super cute!
@RobertaRoseMeads4 ай бұрын
Thank you! 😊
@llafianza6 ай бұрын
Very clever and very good looking. May I suggest you turn on auto cautioning so we can read you instructions as well as hear them?
@RobertaRoseMeads6 ай бұрын
I cannot seem to find that, being off KZbin for 5 years, they changed things around.
@MsAisidora6 ай бұрын
Thanks Roberta. Wonderful as always.
@RobertaRoseMeads6 ай бұрын
You are so welcome! I seen a hand knit version and then those wheels in my head started turning. Like my maternal grandmother, most times I can see something and duplicate it on the machine.
@susanzapletal52996 ай бұрын
Such a cute and clever design Roberta. Thank you so much for sharing this.
@RobertaRoseMeads6 ай бұрын
You are so welcome! Glad you liked it. I do also. I need to get me some not so dark colored yarn.
@valereebraz1986 ай бұрын
Are there any differences between this carriage and the others you push manually? Besides the obvious fact that this one moves automatically and the others I’d have to move myself. Is there a reason someone would want this carriage over others? Or is it purely convenience?
@RobertaRoseMeads6 ай бұрын
Well this one as you see, is automatic, in a way. It still have to be set up somehow. But most that have the Garter Carriage, from what I have seen, use it so they can make something on one machine, and work on a different machine.
@ZuzanaŠevčíková-p3i6 ай бұрын
Dear Roberta, thank you very much for this video- I´m wondering if this information is somewhere in printed mannuals to find?
@RobertaRoseMeads6 ай бұрын
If there is one, you may find it here: mkmanuals.com/brother-knitking/service-manuals.html
@polkunus6 ай бұрын
how do u do this without a seam?
@RobertaRoseMeads6 ай бұрын
This particular sweater would have to be hand knit, and Intarsia in the round so no seams.
@Knittedbyknadj6 ай бұрын
Can u make a generator for this my son just got a tiny dog and I have a standard and a bulky machine
@RobertaRoseMeads6 ай бұрын
With so many dogs out there, doing the Tuxedo style generator will be a little more to it than i would like. I do have a simple spreadsheet generator. kzbin.info/www/bejne/qJ7am5R3obiabNU and a 2 part one here kzbin.info/www/bejne/rH66i3Wqq5mZa5o kzbin.info/www/bejne/hH3Gpmhmf9ODg5I
@sallystevens29476 ай бұрын
Hi Roberta! These look great! Thank you for teaching us this pattern! Take good care!
@RobertaRoseMeads6 ай бұрын
Thank you! You too!
@sallystevens29476 ай бұрын
Hi Roberta! Good idea! Take good care!
@RobertaRoseMeads6 ай бұрын
Thank you! You too!
@annecain33016 ай бұрын
The dog coat looks very neat.
@RobertaRoseMeads6 ай бұрын
I have always wanted to knit up one of these style dog sweaters, Knitware does have a few different designs. I will have to work on some of the others.
@joycefranco73786 ай бұрын
I love this! Thank you for the clear instruction. Now, I need a puppy to make this for. ❤
@RobertaRoseMeads6 ай бұрын
You are so welcome! You can also make a gift for any friends that have a dog. With so many dog sizes, taking measurements is something that one may have to do. The one I made this dog sweater for, well he is moving and not sure if I can catch him before he leaves for good.
@ОльгаМираж-г5м6 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤👍
@RobertaRoseMeads6 ай бұрын
Thanks, I am feeling better with more machine knitting. I know my ex was jealous of myself helping others on the net, but now I do not have to worry about his controlling me as he did for decades.
@julesyan6 ай бұрын
Thank you for the informative video! I have a Studio Mod 700 with the LC2 and it keeps knitting only stockinette even though i have the levers on triangle. It is picking the needles but not actually moving the stitch over. Any idea why that might be?
@RobertaRoseMeads6 ай бұрын
It could be the LC may need a good cleaning or lubricating, hard to say without seeing it in person.
@phoozchic6 ай бұрын
Those hats are really cute! Thanks for the demo!
@RobertaRoseMeads6 ай бұрын
Glad you like them!
@juliacannings5096 ай бұрын
Do you have a pattern for this please I make garments for angel and special care babies .
@RobertaRoseMeads6 ай бұрын
I am not sure I did up a pattern, but if you email me at hobbyknitter at gmail dot com, I can help you along. I will have to work on a pattern for this one.
@juliacannings5096 ай бұрын
@@RobertaRoseMeads thank you , will do
@jeanzei7 ай бұрын
so helpful! Thank you very much i was looking for this to do a blanket!
@RobertaRoseMeads6 ай бұрын
Glad it was helpful! when you take it off the double bed, there may be a slight openness where the beds meet, just keep pulling the material until the sts are set.
@aminatseriki71727 ай бұрын
Hi Roberta, Is it possible to do this on a double bed ?
@RobertaRoseMeads6 ай бұрын
I am sure it can be done on a double bed, just never shown it before.