It's electroluminescent. I bought it from Aliexpress but I don't know if they are still available. It can change color from green to blue and you can adjust the brightness

@@Headlights.restorations nice! May i know how you installed it?

@@adrianlemuel Easy. It didn't fit well so I used the thinnest double tape to mount them. After that power is taken from the power supply from the dashboard and I placed the control/dimming switch near the steering wheel column.

In Bulgaria but I can ship worldwide

If water goes trough the glass lenses and plastic frames, them the glass must be remove, everything cleaned from the old glue and then reseal them back with new one. After it dries test it with spraying water and blowing with compressed air if it still lest water trough.

@@Headlights.restorations Thanks for this, done and seems OK now.

I might have one pair left

​@@Headlights.restorationshow do i reach out to you & do you have it?

​@@LunaWaves Send me a message on my email [email protected]

Yes, I can do it. Send me a message trough my FB page: facebook.com/Headlights.restorations.and.conversions

Around one day

This tool is not a grinder. The speed is much lower.

It's not angle grinder...

Well, angle grinder or not, if that disc snags your jacket, it’s off to the ER, please be careful…..

I'm making ans selling them

Это видео из трех частей.

Хорошо пробую победит ещё, 2

Видео воспринимается очень тяжело, техника на 5 выполнение на 5, но вот с объяснением и звуком вообще беда.

@@usver1989 Лучше в следующий раз

I make and sell them

how much for a pair?

@@thatbluemiata_01 200 euros including shipping in EU. There is option for JDM ones or both red inner lights.

Отражатели не красят,это вакуумная металлизация

I'm from Bulgaria.

I'm only restoring and modifying headlights. I sell restored ones or restore client ones.

They are plug and play with no warning lights.

Please send me a message trough my FB page: facebook.com/Headlights.restorations.and.conversions

Vacuum deposition. It's the factory method - in a vacuum chamber aluminium is heated and it's vapour attaches to the surfaces

It's a whole process of sanding and polishing, it's not done just by a paste.

@@Headlights.restorations Of course, there is no one in Turkey who does this and I want to know for my e36.

@@sedatkaya7500 It's a service I offer. I'm from Bulgaria. If you send me yours I can do them.

@@Headlights.restorations This is very difficult for me, shipping costs and the headlights are mounted on my vehicle. I don't have a spare headlight. I do detailing paint protection myself. Can you provide information about the polishing process? If you have an address on Instagram private

Lens removal is in part 2. They are 3 parts videos and this is the last one.

You can see at 27:49 - the reflectors is not polished. A new chrome coating is applied to it. Old one is removed and new one is applied with the factory method of vacuum metalizing.

You can find them on ebay or aliexpress. Just look for the aliminium ones as they are much more reliable. Power is taken from some unimportant fuse from the fuse box in the engine bay. The LED bulb is inserted in the indicators and there is adapter that fits on the lamp housing. It's super simple. www.ebay.com/itm/123709199079 Everything was done when the headlights was removed for full refurbish including rechromed reflectors

There is some decent gatling led high beams with DRL function

I had a client whom I made a pair of restored headlights with mini H1 bi-xenon projectors retrofit.

@@Headlights.restorations Nice work!, i doing a set my self. Thanks for the reference but to make more appealing maybe shorten video with editing and voice over/cc

@@tmccla2000 I'll make another one this year with more stuff and better results.

I made these. Fog lights have sanded and polished glass to remove all stone chips and achieve this perfect clarity. Halo RGB is personal opinion which one to choose from the market.

@@Headlights.restorations where can I buy this ?

@@bespokeshoecare9447 Check my FB page and send me a message there - facebook.com/Headlights.restorations.and.conversions

Switchback DRL/Turn signals have 3 wires on them. On my tail lights I cut the sockets for the turn signals and soldered the positive and negative from the switchbaks to the wires. I stripped small part of the positive wire from reverse lights and solder the positive wire for the bulb DRL function.

You are correct. But the remapped jetta had 140hp with less weight. Recently I raced the jag with other cars and I suspect that the jag might been tweaked a little before I bought it because it must be slower for the results I get.

@@Headlights.restorations might have to look at getting mine remapped. Getting EGR sorted soon, it's locked open so I'm only getting 35mpg no matter how I drove it.

@@Loundsify For best result if you can delete it by software or with block off plate. It will prevent future build ups in the intake manifold and the car would become little more nippy it the lower revs.