Пікірлер
@AboutaMileAdventures 4 күн бұрын
wheel straps to e track FTW, but i think its really bad on the bearings if our not pulling straight down like you are, like when ppl pull the top of the wheel to the outside of the trailer then strap it down super tight.
@Antwizzy22 6 күн бұрын
Getting ready to do mine I’m glad I watched your video about 5 times I never ordered the crank locker to do it just ordered that also! Lol
@brentlouis1236 10 күн бұрын
The final path is oddly satisfying !
@jimmyleckrone840 17 күн бұрын
Send it lol
@Sir-Ruffles 17 күн бұрын
I think you got a few miles left in it, slap in full of grease and pray
@06racing 17 күн бұрын
Someone put the sprinkles in the wrong location
@SpottableCarp37 17 күн бұрын
As someone who know nothing about cars im about 83% sure that is a car part
@thejourneyretold 21 күн бұрын
Thank you for watching! Let me know what topics I should cover next!
@thejourneyretold 21 күн бұрын
Thank you for watching and dont forget to like the video if you found it helpful! Also feel free to ask me any questions and I'll be happy to answer you back in the comments or I can also make a video about it if that would be more helpful! :)
@thejourneyretold 21 күн бұрын
Thank you for watching and dont forget to like the video if you found it helpful! Also feel free to ask me any questions and I'll be happy to answer you back in the comments or I can also make a video about it if that would be more helpful! :)
@thejourneyretold 21 күн бұрын
Thank you for watching and dont forget to like the video if you found it helpful! Also feel free to ask me any questions and I'll be happy to answer you back in the comments or I can also make a video about it if that would be more helpful! :)
@MAn-ti3ul 21 күн бұрын
12 minutes of rambling!
@thejourneyretold 21 күн бұрын
Thanks for the good input, do you Have a specific topic you want me to talk about? I’m all ears :)
@BCS_guy 21 күн бұрын
You obviously aren't looking to start a brush clearing business! This was super useful information!
@thejourneyretold 21 күн бұрын
Thank you! I appreciate the kind words. Let me know what kinds of questions you have and I can talk about them on the jobs I have coming up this week!
@MAn-ti3ul 21 күн бұрын
@@BCS_guy not a single mention on what his hourly rate is or what the job he was at was bid for. The title should be things to consider before doing a brush job!
@thejourneyretold 21 күн бұрын
@MAn-ti3ul 🤦🏼♂️ DANG GOOD CALL! Check the new title 😎👍🏻
@timmersoft 22 күн бұрын
Great advice.
@thejourneyretold 21 күн бұрын
Just doing what I can :)
@Poolguygp 22 күн бұрын
Great advice, your so correct on the "cracked head with the crap car" it was perfect before you showed up and damaged it!
@thejourneyretold 22 күн бұрын
lol
@thejourneyretold 22 күн бұрын
lol
@casey2053 23 күн бұрын
Atleast your not rebuilding a 14 liter cummins engine.
@thejourneyretold 23 күн бұрын
Did an overhead and injectors on an N14 for the old race car hauler/trailer but never did an in-frame or anything on it.
@dth1488 23 күн бұрын
Super awesome video gonna add some of your stuff to my rig!
@thejourneyretold 23 күн бұрын
Thanks man! Go down the rabbit hole man, it’s a slippery slope but worth it!
@manuelcarmona5747 24 күн бұрын
That's how you keep fun wild weekends going!
@thejourneyretold 23 күн бұрын
DANG RIGHT!
@commentaccount7880 24 күн бұрын
if you have all the extra shit you don't need put away really compact and nice its a flex when you need it but if ur lugging around a bunch of stuff willy nilly it will appear sloppy even if its actually the opposite
@thejourneyretold 24 күн бұрын
You should ALWAYS bring spare parts racing; if you don’t use it, someone else might… Nothing Willy Nilly - BUT I get what you’re saying, I do leave a lot of crap behind and only bring the stuff I’m willing to fix/replace out there. At some point you will have to admit defeat so I leave that stuff behind
@Webwtw 24 күн бұрын
i mean maybe a little bit extra but there’s absolutely nothing wrong with being over prepaired
@thejourneyretold 24 күн бұрын
I always try to bring enough stuff to fix whatever I can foresee breaking - and whatever I’m willing to fix - sometimes you have to admit defeat and plan to fix it at home, but I also want to be sure that if someone else needs something that I have it…you’d be amazed at what people lose/break and what we’ve been able to cobble together out there lol
@canadiansheepdog1902 24 күн бұрын
You cant race if there isn’t any competition.
@thejourneyretold 24 күн бұрын
Not sure I’m following what you’re inferring? I don’t think I said anything about not liking competition? That’s one of the great things about a UTV, very affordable so there’s lots of competition?
@canadiansheepdog1902 24 күн бұрын
@@thejourneyretold no,no sorry that’s not what I meant. The utv community is so good that we will help another driver with parts or even help wrenching on other competitors rides just so we can actually race and not just pretty much time trial against ourselves if that makes sense. If everyone is broke down than no one to race.
@thejourneyretold 24 күн бұрын
@canadiansheepdog1902 THAT is a DANG good point. 110% agree. Just so crazy how different it is from a lot of racing I’ve done. Idk why it all can’t be this way - it’s WAY more fun! Lol
@boots1131 25 күн бұрын
Thanks for letting us ride with you, that was fun
@thejourneyretold 24 күн бұрын
Any time! Glad you enjoyed it!
@brycesanders5402 26 күн бұрын
Its been ~100mi since I did the rebuild. Added shims in the process and could barely turn by hand much like yours. When I got it back in the car the Play at input shaft was 1/2 or less than what it was prior, but now after 100mi the amount of play feels EXACTLY like it did before the rebuild. I had one of these racks in a prior car and have felt a few others. They ALL seem to have that play at the input. I don't think you can shim it out unfortunately.
@thejourneyretold 26 күн бұрын
That’s weird, I wonder if it’s play in the steering shafts? That’s where most of mine comes from is the couple different shafts. Maybe try cleaning it all out, then WITHOUT grease shim it and assemble it so it’s how you want it, then pull it apart and grease it up? PITA to get in/out of the car but just an idea.
@brycesanders5402 25 күн бұрын
@@thejourneyretold I have very little if any play in the factory steering shaft. If I sit in the car with the rack centering bolt in place I can measure 5* of deflection/play in the steering wheel using my Iphone angle app. If I hop out of the car put my right hand on the steering wheel and left hand fingers down at the input shaft/steering shaft they move in unison. You can feel the input shaft rock back/forth. I don't get how after shimming and it being so tight, that it gets this sloppy when back in the car.
@thejourneyretold 25 күн бұрын
@brycesanders5402 I bet the grease stiffens it up a lot. I’d try cleaning it all out, assemble it with no grease to get the shims dialed in, and then disassemble and grease it up and do final assembly. It will never be perfect, there will always be SOME play. I have like 1/2” or so of slop (top line of the steering wheel will move 1/2” freely - 1/4” each direction)
@erniecortez1077 27 күн бұрын
Great video! Great comparison, and clarification!
@thejourneyretold 27 күн бұрын
Thank you!
@thelegenddaudryadipi7038 Ай бұрын
Nexttime please leave the engine audio in the video Love the video 💪🏽💪🏽💪🏽💪🏽💪🏽
@thejourneyretold Ай бұрын
I tried to for a lot of it - I’ll see what I can do microphone wise to make it better. Thank you for the great feedback! 😎👍🏻
@thelegenddaudryadipi7038 Ай бұрын
@@thejourneyretold what desert race are you going to race ? I love what you done to the X3
@usot. Ай бұрын
nice 😂
@thejourneyretold 23 күн бұрын
It always amazes me!
@thejourneyretold Ай бұрын
Thank you for watching! Let me know what topics I should cover next! 😎👍🏻
@russellhegel1119 Ай бұрын
Check out ecc racing diff tray out !!!!! Makes it super easy to swap diff out or inspect it between races
@thejourneyretold Ай бұрын
Heck yes I will - thank you for the great input!
@tinytattoomike7943 Ай бұрын
I’d try tapping on the starter before moving the truck with a skid steer a couple taps with a hammer while holding the key on it’ll fire right up and you can drive it in the shop
@thejourneyretold Ай бұрын
Unfortunately no luck on the taps. Apparently the long tube headers are pretty close to the starter and he thinks it cooks them. Basically he has to do a starter like once a year it sounds like.
@gang-yc4je Ай бұрын
A Sierra cubed is rare asf
@thejourneyretold Ай бұрын
And she’s MINT too.
@gang-yc4je Ай бұрын
@@thejourneyretold is it quadrasteer?
@thejourneyretold Ай бұрын
No just AWD 6.0L - heads cam and built trans. 118k miles. My buddy keeps it immaculate (he has a detailing business)
@chapinfowler3332 Ай бұрын
Wow! Exhilarating
@thejourneyretold Ай бұрын
Dang right
@ryanstevens4576 Ай бұрын
Where is this area in Washington?
@BuckSmith-x5f Ай бұрын
It isn't roll over every other day. 1200 dollars to drag it back up right.
@thejourneyretold Ай бұрын
Very true
@jeremiah1059 Ай бұрын
Did he say 40 ft = 8 stories? He needs to go back to math class.
@thejourneyretold Ай бұрын
Lmao dude I totally did! 😂🤦🏼♂️My bad haha i never even noticed it! Worst part is I love math lol definitely a bonehead move on my part and good catch! 😂
@equinsuocha4446 Ай бұрын
Call before you dig 😂
@thejourneyretold Ай бұрын
You’ve never used 811 then…they miss stuff CONSTANTLY….including this.
@elijahdonaldson69 Ай бұрын
Water, gas , electrical durable detector on the bucket.
@thejourneyretold Ай бұрын
Is that actually a thing? Give me a product name / mode because that’d be awesome!
@elijahdonaldson69 Ай бұрын
Isn't t
@thejourneyretold Ай бұрын
Correct
@lawrenceblersch3265 Ай бұрын
If the owner of that rig does any tonnage work, a frame less trailer is lighter weight so he can have a heavier payload! The extra tonnage hauled generates far more revenue every month!
@thejourneyretold Ай бұрын
Now THAT makes TOTAL sense!!! I’ve always wondered why. To me it looks so sketchy, BUT I also know if you use it as intended, it’s all good. I have a feeling he does tonnage work because I’ve seen that truck in this material yard a LOT - hauling a metric f**** load of material each time too. lol never more than 80,000 lbs of course tho 😜
@RileyVanAlstyne Ай бұрын
"Smelled good so was gonna grab a bendy straw later" bro I thought I was only one who loved glycol 😂😂😂
@thejourneyretold Ай бұрын
Shoot dang man, that’s the 8th wonder of the world dude! 😂
@RileyVanAlstyne Ай бұрын
@@thejourneyretold 😂😂😂
@fjb6590 Ай бұрын
Iv had the motor out in a newer one then that once it got flooded had put new harnesses everything. Talk about a ordeal
@thejourneyretold Ай бұрын
Dude honestly that sounds like a serious nightmare
@Poetik.2 Ай бұрын
that all bad 😂
@thejourneyretold Ай бұрын
Yea she’s cooked lol
@4-dpcs335 Ай бұрын
Probably an obvious guess, but the green stuff below is coolant, and it leaked out of the water pump that looked to be shot from your video.
@thejourneyretold Ай бұрын
Winner winner! Frustrating that the WP never weeped or anything to sign that it was going. Serp belt started to squeal intermittently for about 3 minutes before I heard a lot of bad sounds. I was wanting to get the rest of the gravel moved (like 5 scoops worth) and then I was going to investigate… guess I should’ve checked sooner 🤦🏼♂️🤦🏼♂️
@mikez3102 Ай бұрын
So many contractors need to hear this 😂
@thejourneyretold Ай бұрын
Agreed - they hurry through stuff and forget to think.
@brycesanders5402 Ай бұрын
Also crazy that ST(Justin) sells these racks with the claim "maintenance free". Hardly the case...
@thejourneyretold Ай бұрын
Bigger thing that bothers me is that what got me to buy it was the “lifetime warrantee” he talked about in a video of it…but it doesn’t actually have a warrantee. Like I said, I still love it and would do it again, but it is indeed a LOT of maintenance…as is the rest of the X3 lol
@thejourneyretold Ай бұрын
Bigger thing that bothers me is that what got me to buy it was the “lifetime warrantee” he talked about in a video of it…but it doesn’t actually have a warrantee. Like I said, I still love it and would do it again, but it is indeed a LOT of maintenance…as is the rest of the X3 lol
@brycesanders5402 Ай бұрын
The last time I sent a rack to ST for rebuild it came back with just as much slop as I sent it in with. Highly disappointed in STs rebuild. I will be doing my own rebuild next time.
@thejourneyretold Ай бұрын
I LOVE ST, but I feel like there is definitely room for improvement in some areas. The rebuild is really easy, just do it like every 1,000 miles or every year and it’ll be solid. The biggest thing is if you wait for it to get loose you’ve already lost. Once the grease inside gets gritty with dirt it’s like a valve lapping conpound and will really eat away at stuff so make sure she’s always fresh! Feel free to ask any questions when y rebuild it and I’ll be happy to help or talk ya through anything.
@thedutchman8793 Ай бұрын
I've taken a Dodge dynasty down worse 🤦♂️
@thejourneyretold Ай бұрын
Badass!
@G.I.JeffsWorkbench Ай бұрын
I kinda agree, but skid loader - Operator - for the win.
@thejourneyretold Ай бұрын
Yea for sure - they all have their place. I just want the best of both worlds sometimes lol
@georged1085 Ай бұрын
This is hardly even an obstacle😂 he couldn’t driven down that in any direction and been fine
@thejourneyretold Ай бұрын
Even in reverse!
@AshtonHenderson-c8c Ай бұрын
It looks like that hose is rubbing . But I can't tell from the video
@thejourneyretold Ай бұрын
Turns out water pump bearing went out and sent the fan into the radiator. Frustrating because normally a failing water pump will weep first… this one definitely didn’t! lol oh well 🤦🏼♂️
@johndevaney114 Ай бұрын
Use a wobble joint or shorter extension.
@thejourneyretold Ай бұрын
Exactly what I did - wobbly FTW!
@chadrides914 Ай бұрын
Did it work?
@thejourneyretold Ай бұрын
Checkout the full video - basically did a comparison test - I’m pretty shocked at the difference actually