I bought one had to fix the chain brake but other then that it works good.
@DTGbuilder14 күн бұрын
Would you mind sharing the part number and where to buy the new cylinder? I need to replace the cylinder and piston in my Proyama PCS68 as well. My cylinder has “5966 Zomax” on the base, but I can’t find a replacement anywhere. Thanks.
@brandonf1226Ай бұрын
Ive been thinkin of a version between proyama and there is another one that stands out above the rest
@jimsteele7108Ай бұрын
So why did you cut the video short and what did you expect your viewers to get out of this?
@tatepazaski5488Ай бұрын
Yeah the guy that was videotaping accidentally hit the button. If you watch my short video you'll see the rest Sorry about that
@jimsteele7108Ай бұрын
CRAZY SCARY!
@jimsteele7108Ай бұрын
WHAT THE HECK?!
@jimsteele7108Ай бұрын
HOLY CRAP!
@jmaddenejsАй бұрын
Your neighbors must love you
@richarddodds93262 ай бұрын
That pyroma is way better that other saw ain't built right too much useless speed not enough torque
@vanhainguyen4392 ай бұрын
Such a nice and powerful chainsaw with new cylinder, thanks for sharing your review
@tatepazaski54882 ай бұрын
@@vanhainguyen439 thanks for taking the time to watch!
@Super-Dave-Outdoors2 ай бұрын
If you do freeport around .020" it wont really hurt anything. If you start pushing past .030" that would start to be a concern but i have hear of stuff running great a lot further past that.
@tatepazaski54882 ай бұрын
Thanks for letting me know that. I never knew that. I wouldn't want to chance it through the fact that I'm aware free air is making its way in, but at the same time Super Dave, you're well respected in my eyes, so damn ...it must be true.
@Super-Dave-Outdoors2 ай бұрын
@@tatepazaski5488 at that point 98-99% of the low pressure in the crankcase has been reached. Once the piston starts to come down it now seals and starts to pressurize the crankcase again. If the exhaust is super blocked up then maybe a little free porting can be bad due to backpressure but still it is a very small amount of time the crankcase is open. Not saying intentionally freeport but a super small amount wont be noticed.
@Sparaco4872 ай бұрын
I used motoseal along with the gaskets on my carb boot and all on my 257/262 hybrid.. idk if thatll help you or not
@Doc-Cole_Trickle-of-Chainsaws3 ай бұрын
👍🆙TP, does look and sound really good
@Doc-Cole_Trickle-of-Chainsaws3 ай бұрын
👍🆙TP
@old12343 ай бұрын
Hey Tate, the Amazonian site just put up the cylinder kit you need. Look for proyama 68cc piston cylinder kit. If I post the link here they just immediately delete it.
@theogi83753 ай бұрын
I am 49 and my best lift is 405 for 5 ! You are strong!
@tatepazaski54883 ай бұрын
@@theogi8375 Your 5 at 405 is still in the ballpark. Nice work!!! 💪
@Houseworksaws4 ай бұрын
What’s the bore size (MM) of the original Proyama cyl? I’m pretty good at hunting parts maybe I can find something for you.
@tatepazaski54884 ай бұрын
Oh s*** okay. I'm in Lincoln City, Oregon. Hitting the waves today, about 10 hours away from my home in Washington. I'll check that out when I get back this week. Thank you!!
@Wayne-fu9qz4 ай бұрын
I purchase this Proyama 68cc chainsaw on amazon, it comes with 2 bar and size, 24in and 20 in, it's a beast! Love it!
@tatepazaski54884 ай бұрын
I agree!!
@tatepazaski54884 ай бұрын
What I will probably do is, well hopefully find this cylinder, modify it and then put it on the market. Then I'll wait to hear your rules and rags for the upcoming competition.
@novicelumberjack4 ай бұрын
I'm not gonna allow that cylinder in the competition. Sorry. This competition is going to focus on the Zenoah 5200 clones and I want people to only use stuff that works on that chassis. But, it looks like you aren't gonna use that cylinder anyways. You could probably cut the squish and top of the piston enough to make one of the cylinders for the regular 6200 saws work. I'd try that.
@ArkansasChainsaw4 ай бұрын
pine and sawdust? sharpen that chain chips should hurt and look like fritos
@tatepazaski54884 ай бұрын
Just a stock out of the box review. Nothing more
@toolsreview71595 ай бұрын
SOPOWERFUL
@toolsreview71595 ай бұрын
PROYAMA IS BETTER CLONE SAW IAM SURE BEST SELLING ON AMAZON
@tatepazaski54885 ай бұрын
Yeah, it seems to be pretty powerful. I want to see how powerful it is with my port job but the cylinder is toast. Waiting for a new cylinder
@BillsGarageWorks5 ай бұрын
I don’t have a 90 degree yet either. I have found success using the ball style double cuts along with diamond ball bits. I put the cylinder in a vice so I can use two hands to control the dremel. It takes forever but it’s what I have. Sucks about the cylinder I’ve def done that, but we learning!
@tatepazaski54885 ай бұрын
I might try that diamond ball. I talked to Dubbs and he's got a good 90 degree dremel but you would have to bounce a $250 check to get that one.
@novicelumberjack5 ай бұрын
Swap that chain out to a C83 and see how much better it feels! Yes, I am still doing the Kung Fu Hustle. Did yours come with an actual 20" bar? Should be 72 drive links. Mine came with an 18" bar, 68dl, and it was just marked 20".
@tatepazaski54885 ай бұрын
Hey Boedy, Did you watch my last short? That cylinder is the proyama. Worse yet I can't find a replacement, even with the part number!!! I will check the 20-in bar on its length as soon as the tears clear up in my eyes so I can see. So glad to hear the Kung Fu Hussle is still a thing!!! Take care
@Houseworksaws5 ай бұрын
Lol 😆 I shoulda probably waited til the end to say anything. I didn’t see the last part 🤣
@tatepazaski54885 ай бұрын
They were pretty deep Big House. The plating isn't that good on those cylinders? And some of those dings were beyond the plating. I just looked online for a new cylinder and I can't find one anywhere. Trying to figure out if there's a cylinder piston combo from a different saw I can use. You know I probably shouldn't have checked that to the driveway just in case I can't find another one. Let me straighten out fins for days if I can't find another.
@Houseworksaws5 ай бұрын
@@tatepazaski5488 fins aren’t all that important anyways. I’ve used many cyls off saws that were crushed by the skidder or trucks and it bust lots of fins off. Also holes through plating is the same principle as grinding fingers in. As long as you can get them smooth you’re likely fine. Not giving you any BS or anything just saying in case it’s a last option type thing it’ll at least getcha running lol 😆..will it be pretty? No prob not but it may getcha running and that’s all that matters. Anyways best of luck man 💪👍🌲🇺🇸🌲
@tatepazaski54885 ай бұрын
@@Houseworksaws thanks for the advice Big House!!
@Houseworksaws5 ай бұрын
Sand them smooth and run it… they probably look bad but I bet with a little sanding they won’t affect anything.
@loseyourlife40426 ай бұрын
Pretty good saw I’d say
@tatepazaski54886 ай бұрын
Yeah I was surprised.
@Houseworksaws6 ай бұрын
Sounded a tad lean on the H after your second cut. Fatten it up a tick and man I bet that thing will really rock and roll. That’s darn impressive for Zenoah clone. I’m gonna have to get me one and build it on my channel.
@tatepazaski54886 ай бұрын
Yes a bit lean for sure. I'm not a clone guy but I was pretty amazed at its aggressiveness. It may not be a Marathon saw but well, we'll see.
@Houseworksaws6 ай бұрын
@@tatepazaski5488 It’s a mean lil thing for out of the box clone
@tompeisner55326 ай бұрын
Clean controlled reps. Love to see it. Keep it up
@liftingforliberty57996 ай бұрын
Looks strong man! You can def move up in weight if you move a little quicker. But then the gym librarians might get upset lol
@yokosucks6 ай бұрын
Quarter reps for size and strength
@johnpolston86807 ай бұрын
WHERE are parts 2,3 & 4?
@tatepazaski54887 ай бұрын
I'm running out of videos with little time lately. So I'm just extending them one per day. Thanks for asking though. They're just short shorts.😊
@tatepazaski54887 ай бұрын
Oh that's great news!!!!! You must have figured out how to dial it in better than I could. Did your saw do outstanding like I predicted?
@dubbssawshop7 ай бұрын
Your saw held its own today buddy!!!! A loud little Mojo too.
@dynojoemods27647 ай бұрын
I'm sure you will do fine! A lot can happen during a saw race. Will be a great time
@tatepazaski54887 ай бұрын
Thanks Joe!! I feel like I shouldn't have gotten back in there for a second grind. First test cut it bogged down like a S.O.B. it was late at night and I got neighbors on top of me. I turned the screws on the carb, fired up one test cut and it didn't die. But then again, it wasn't that impressive either. So I never really dialed it in all the way because I planned on shipping it out the next morning. So basically hoping they find the correct tune. I watched your saw and it was a freaking beast. On the next competition I'm going to be begging you for information. Good luck Joe.
@dubbssawshop7 ай бұрын
The nerves!!!! 👍🏻 You'll do great man!!! Just super glad to see new names enter in, always great to see, and from what ive seen, you entered in a good one. If your looking to stay in the hobby, this is a great way to do it. An 8hr ride later and I'm here in Atlanta waiting for tomorrow.
@tatepazaski54887 ай бұрын
Yeah TW, I saw you made it to the Hotel. Have a great dinner. Good luck tomorrow and thanks for your help!!
@dubbssawshop7 ай бұрын
@@tatepazaski5488 thank you man and good luck tomorrow!!!! 👍🏻
@tsuna_o77 ай бұрын
doing damn well for 51
@tatepazaski54887 ай бұрын
Oh wow thank you 🙂
@hoffpauirconcrete.semperfidCC7 ай бұрын
That Dewalt is from 1983
@tatepazaski54887 ай бұрын
Close, it was bought brand new in 2008
@hoffpauirconcrete.semperfidCC7 ай бұрын
@@tatepazaski5488 back when Dewalt ruled the world
@hoffpauirconcrete.semperfidCC7 ай бұрын
@@tatepazaski5488 back when Dewalt ruled the world
@Super-Dave-Outdoors7 ай бұрын
Super clean old saw. That was back when echo didnt have a pro and homeowner line so it is pro quality but just lacking in power due to older design architecture.
@tatepazaski54887 ай бұрын
I just learned something. Thanks Dave!!
@chainsawcanuck7 ай бұрын
You wear same safety gear I do👍👍
@tatepazaski54887 ай бұрын
It couldn't get any worse. At least I was wearing my eyeglasses. I don't know if that counts for anything though.
@jimholz11027 ай бұрын
Kevin wears Kevlar socks with his sandals. All the better to track chips into the house.
@umplekourt7 ай бұрын
Only professionals wear sandals with a chainsaw. 😂
@tatepazaski54887 ай бұрын
That's correct!!!!!
@Houseworksaws7 ай бұрын
Gettin there. Tell ya is sounds like a strong runner
@tatepazaski54887 ай бұрын
Thanks, yeah it's already shipped. I threw in an extra $10 hoping Boedy can fine tune it.
@Houseworksaws7 ай бұрын
@@tatepazaski5488 I’m sure he’ll get it dialed right in for you. I would imagine many will need fine tuning due to elevation, temp etc.. I’m doing my final assembly tonight and testing tomorrow then Monday it’s going out. I’m excited to see what others come up with.
@tatepazaski54887 ай бұрын
@@Houseworksaws well I hope it turns out great for you. Good luck!!!
@Houseworksaws7 ай бұрын
@@tatepazaski5488 Thank you, You as well
@BillsGarageWorks7 ай бұрын
Glad you got it running good! I’ve had a few moments of I bet my neighbors didn’t appreciate that. Well and probably my wife. But I mean 11 pm just got a build finished and the starter handle just pulls itself I promise 😂
@tatepazaski54887 ай бұрын
😂🤣😂🤣😂 Did you notice how nervous I was and how quick the video was? I was trying to get done before the neighbors came outside. I'm glad I'm not the only one Bill🤣! And yes that damn pull cord comes off right damn in the middle of another problem!!!!
@Houseworksaws7 ай бұрын
Man that actually sounds really good at first. I think it’s lean and running itself out of fuel.
@tatepazaski54887 ай бұрын
I think your right.
@jacobmcclusky7 ай бұрын
Those poor shoes and socks, so hard to get sawdust out of them. 😂
@tatepazaski54887 ай бұрын
Correct, even the air compressor doesn't get it all out and it drives me nuts!! Trust me though, you'll see it in the next video too.
@christophercollins34607 ай бұрын
Ah hell this stuff happens to us all. Could be fuel delivery issues but most likely an air leak. Good luck, you'll get it dialed in.
@tatepazaski54887 ай бұрын
Yeah it looked to be a fuel issue. DONT SCARE ME WITH AN AIR LEAK!! I DONT HAVE THAT TIME!!! Anywho it looks to be ready to go now. Hope all is well Collins.
@Super-Dave-Outdoors7 ай бұрын
Mine is scattered on the dinner table right now😬
@tatepazaski54887 ай бұрын
Lol in the next part 2 I got it going that night. At the end it didn't seem the more I modded, slowing the less the results. I'm calling it good and shipping it out. Good luck to you Dave on getting that back together and kicking some butt!!