Do you just connect it to the hose and no machine?
@JustAnotherReviewGuy15 күн бұрын
Just your standard garden hose
@DizConnected20 күн бұрын
I just got the RYOBI 40v 1500 PSI cordless pressure washer from Amazon for $299.99, I was sure I was going to get scammed because it sells for $599 at Home Depot. It arrived, new in box with all accessories, I threw away the trash hose as soon as I hooked it up to the pressure washer and it kinked 4x before I got it straightened out. I went on Amazon and bought MEKOH Short Pressure Washer Gun, 4000 PSI High Power Washer Spray Gun and MEKOH 32ft Kink Resistant Pressure Washer Hose, 3500PSI 1/4" Power Washer Hose with M22 Brass Fittings bundle for $19.99. The gun doesn't have a built-in swivel, but the quick connects I use act as a swivel and the hose never kinked even once! I bought the battery powered pressure washer to do mobile detailing out of the back of my car, which it is perfect for since it syphons water from a 5-gallon bucket. I don't even need to use the turbo mode, so the batteries last a long time.
@StringrPress21 күн бұрын
Why not buy a step up ring?
@JustAnotherReviewGuy20 күн бұрын
what is that used for? where can i buy one? Thanks for the information i appreciate it
@JW-so4fc24 күн бұрын
Yikes...I would find a different type of car...Thanks for the review tho
@native4063Ай бұрын
I wont use this crap again it streaks and strips ,wasted alot of m9ney buying into the BS at a autozone,live and learn
@germainwilson800Ай бұрын
This product is 5$ more then armor all. Doesn’t seem to be worth the extra money
@JustAnotherReviewGuyАй бұрын
Your right, I prefer armorall over the chemical guys product. Still trying to find a product that actually lasts, though. Thanks for watching
@germainwilson800Ай бұрын
@@JustAnotherReviewGuy everything is over priced and not worth using. Might as well get the cheapest and best product that works and saves you money
@DizConnectedАй бұрын
I like your videos, short and to the point!
@JustAnotherReviewGuyАй бұрын
I appreciate that!
@DizConnectedАй бұрын
I started out with a Armor All 2-in-1 Foam Cannon Kit. It works with a water hose or a foam cannon and I think works better than the MATCC in this video. It is $30 atm this time on Amazon.
@DizConnectedАй бұрын
This might be a good product to wash the auto with before protecting it with the Armor All Ceramic Foaming Car Wash Soap with Extreme Shield.
@DizConnectedАй бұрын
I get a gallon of Armor All Ceramic Foaming Car Wash Soap with Extreme Shield from Amazon for around $22. I love the stuff. Just never let it dry on the car. Oh I forgot to mention that this is the only Armour All product I use. Everything else is DIY and some Hybrid Solutions products.
@louiscandreva8850Ай бұрын
WISH I SAW YOUR VIDEO BEFORE I BOUGHT THIS !!!! Just got it and haven’t tried it yet! We will see
@JustAnotherReviewGuyАй бұрын
Thanks
@VanIykeАй бұрын
Thank you for this.
@JustAnotherReviewGuyАй бұрын
My pleasure!
@johnlastname28952 ай бұрын
Instructions for use "apply to dry wheel"
@magicofthestone2 ай бұрын
bruh, didn't show us anything -- a foam cannon is a piece of party hardware, not a cleaning tool. Consult the internet before you make yourself look insane.
@djf76882 ай бұрын
I used it on a Z4 myself (at night) for the correct soaking time. It took color off of the black convertible top. The foam was black and wasn't dirt
@gabrielm.beterjr.79912 ай бұрын
Mahalo!
@badkarma57763 ай бұрын
NOT TRUE, could not remove water spots from the hood of my car. Junk!
@JustAnotherReviewGuy3 ай бұрын
Depending on the waterspots, it could take a couple applications and elbow grease to remove them. I know on my car I had to aplly alot of pressure when removing the waterspots for the first time.
@badkarma57763 ай бұрын
@@JustAnotherReviewGuy I tried multiple applications. It worked on the sides of the truck but no luck on the hood.
@danielbonner8309Ай бұрын
@@badkarma5776It's definitely not junk. Water spots can be tricky. Sometimes the chemical alone will remove them, especially if you have some kind of protection on the paint. If it doesn't, the minerals have more than likely etched the clearcoat. In that case you have to compound and polish. You still want to use the chemical beforehand cause it removes the minerals which compounding does not.
@nofam3 ай бұрын
I run this foam cannon with Sticky Snowball on a Karcher K7 and I get great suds - maybe not quite as thick as the best MJJC vids you'll see on here, but way better than this. Not sure what's going on with this setup bud? I probably use a slightly higher ration of wash to water, and always use hot water in the bottle. It's a decent foam cannon from my perspective, the clear bottle and wide mouth make it really useable.
@JWM57734 ай бұрын
So just pre rinse...than armoall foam spray.. than.rinse that's it??
@dr.burtgummerfan4394 ай бұрын
Make up a strong solution in a spray bottle and use as a clay lube. It makes the black paint, especially a flake, really pop!
@jonathanthomas-jc5iw4 ай бұрын
I used it on my car , Garage
@cryptidandparanormalkingdo3475 ай бұрын
How many caps do you use for each car wash?
@JustAnotherReviewGuy4 ай бұрын
I try to measure 3 ozs
@kanaletumlinson5 ай бұрын
Nice thanks for the review! I got Hydro spin in a mystery bucket recently. I need to give it a try asap.. new sub here
@ervinmari90515 ай бұрын
Can i connect this to garden hose?
@JustAnotherReviewGuy4 ай бұрын
Needs a pressure washer
@tigerconway5 ай бұрын
getting one next week..
@khiaraslaw6 ай бұрын
Any soap will wash that cheap stuff off
@jotu1736 ай бұрын
You said "poor BMW". You are correct & I totally agree (they are all poor vehicles). As such, leaking is considered normal... SMH.
@JustAnotherReviewGuy4 ай бұрын
I Know they all leak, I was just thinking out loud how i need to get it fixed instead of looking at at oil stains every where I park
@kingofslotsmillion32636 ай бұрын
This crap leaves shit all over my car
@LauraZamora-gm9nm6 ай бұрын
That look like snow
@sailor957 ай бұрын
Thanks for this! I almost was gonna buy CG Ceramic. Definitely gonna get the Armor all now.
@MIKEJAMMER7 ай бұрын
I yr old and mine is gushing water so much out the vents it's awful
@bobhowells96037 ай бұрын
im not a pro, but i always do the glass first because thats where you will really “see” the streaks/water spots. if im wrong lemme know
@charlesludwig91737 ай бұрын
I used Hydro Suds once and that was enough to know the product did not aid vehicle detailing but actually thwarted it. To explain, after pressure rinsing my black vehicle which had earlier been sealed with Top Coat F11PRO I could have gone directly to blow dry as there was no evidence of any road film on vehicle; nevertheless, I foamed the vehicle with Hydro Suds and pressure rinsed again only to discover the Hydro Suds had stripped the F11, which left the vehicle finish unprotected and dull. Only by reapplying F11 was I able to restore deep gloss to finish. The bottom line is Hydro Suds seems needless if vehicle is sealed and only of benefit if stripping polish and sealer from vehicle is the desired result. In other words, if the vehicle is sealed with F11 it prevents dirt from bonding to paint and thus only a pressure rinse and non contact blow dry is needed to clean vehicle.
@KEYTKTL7 ай бұрын
Is this the ulanzi one with the adhesive? If so get a 40.5mm-52mm step up ring. The adhesive is bad and the attachment will fall off.
@MagicMikesDetailing8 ай бұрын
I have this foam cannon, it does go thru product quickly no matter the orifice size. I now use it a a pre soak cannon with super clean
@bradbisek27188 ай бұрын
The reason it goes into jet stream is because you taped the vent. Your building too high off pressure. I have the same one, same soap, 2800 psi PW, and have no problem getting great foam. Also, i found a larger plastic canister that fit the threads and can get my Bronco Sport and Harley done with one fill and still have some left. Definitely not the best cannon but works fine once you figure some things out.
@JustAnotherReviewGuy8 ай бұрын
Thanks for the advice about the vent, I taped it because it kept leaking. I will remove the tape and retry the foam cannon.
@douglaslewis10208 ай бұрын
well hell , 300 miles and they havent BEEN cleaned what did you think WAS GOING TO HAPPEN
@JustAnotherReviewGuy8 ай бұрын
I would expect to happen what the chemical guys claim will happen. Thanks for the feedback
@DJMerck8 ай бұрын
@@JustAnotherReviewGuy exactly
@gregarizmendez52758 ай бұрын
The Pulituo Ratchet is very similar and the Pulituo ratchet has replacement batteries through their store on Amazon. The avid battery looks the same but not sure.
@kimberlyakuhn9 ай бұрын
Thank you
@Inpreesme9 ай бұрын
Can I just park my brand new Corvette under a rock instead?
@DJMerck9 ай бұрын
I'm not sure it's even a legit ceramic coating, I think it's just labeled as one. Aren't we supposed to be looking for silicon dioxide percentages?
@JustAnotherReviewGuy8 ай бұрын
Not sure to be honest, I just expect the stuff to work as claimed by the manufacturer. Thanks for the feedback
@804MRMAN8 ай бұрын
There's always one 😂
@1982field9 ай бұрын
Try a 6ma battery it makes a difference
@JustAnotherReviewGuy9 ай бұрын
ill have to try that outm the grinder is still going strong tillthis day
@Phantomsshot61510 ай бұрын
Definitely not the cheapest but okay
@carlosmcabrera495910 ай бұрын
nice video , love the way you explain everything. i’m getting into this now and it really helps 👌
@RipperYouTubeOfficial11 ай бұрын
6 and half minute mark. You need to change to a smaller orifice
@Vidushaka6811 ай бұрын
I have the big mouth and a cheap 1500psi washer that puts out 7.5 litres per minute and it work awesome unlike the result you’re getting 🤔
@ryanazevedo223711 ай бұрын
Never use fabric softener om anything. it ruins everything especially towels because it prevents the towel from doing its job the absorbance isn't there anymore
@hatch450sx3 Жыл бұрын
Good luck stealing my car lol 3 kill switches in my car. One is even a magnetic switch hidden.
@JustAnotherReviewGuy Жыл бұрын
Nice, Can never have to many too keep the crack heads away
@hatch450sx3 Жыл бұрын
@@JustAnotherReviewGuy and it's a manual lol. If I had a hellcat I would remove the ecm or tcm whichever is easier to get to.