@@tylerthomas35 Thank you sir!

@@razorsazors no, but it wouldn't take much to get it to burn oil

@TruckBoat I make smudge pots, that's why I asked. A 55g drum seam welded down to 20 is in the future plan

@@jessefpv9217 without looking at it, my first guess would be a dirty carburetor, air filter, or fuel filter

Try importing the .dxf file on to the USB, not svg.

Common sense isn't very common. I've seen someone call a tow truck because their car wasn't starting. They had left it in drive

Yes there's a video in the pipeline for that. From what I understand, I'm going to need to half the voltage signal.

@@TruckBoat that would be great. I subscribed.

Yes that's correct

I meant to say .dxf, my mistake I haven't been able to view/load .svg either.

Yes, when you access the file when using the ArcDroid touchscreen it will generate a g-code file, and you'll see the cut path on screen.

@@TruckBoat from there you tell it whether to cut from the outside or the inside?

@@Travisphoenix334 Exactly, you'll turn the ArcDroid on, press the home button, press load, select the DXF file, it'll convert the file, from there you'll see "R CUT" or "L CUT" for a simple shape. That setting will determine whether it begins the cut outside on the left of the object or the inside path to the right.

I believe so, if anything you would just have to convert the .svg to .dxf in order to modify the vector

Thank you sir!

They're where the mid mufflers were

My bad I read the description yours is muffler delete with the res replaced with the bullets?

@@rojomojobrand5364 Yes, from the cats back is just pipe and the bullets. It's plenty loud, my friends tell me they can hear me from inside the house when I turn down the street.

I personally still like this setup. I've been on a couple 4hr+ road trips and its not too loud/annoying in the car. On the outside it crackles and pops. I just think the 44 or 10s would be too quiet

Thanks Oni!!