This is a Lazy-Boy recliner. The easiest of all recliners to work on. But Not every recliner is built this way.

Mine broke in the same spot as the thumbnail 😩 i was hoping you were fixing that

Thanks

Thank you very much ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Can I use this to remove paint from an aluminum boat?

What is the solvent you use? How do you seal it? I’ve used spray lacquer, but it doesn’t give me the right finish.

My problem is slightly different on a simpler scissor footrest - odd thing are the bracket fasteners...they kinda look like bigger rivets ...they are located at each end of the bracket ---Don't know what they are called but would be helpful to know. This is what I have done...I drilled those pins out...took the 2 brackets, put on a vice, straightened , then re-installed them with nuts and bolts. ( fasteners were drilled out ) Would be much nicer to buy the bracket with 2 new pins and swap out what in most cases are 2 brackets that are warped. Can't imagine the amount of chairs thrown out for a simple bent bracket that should be replaceable. Thx for the vid.......and no ...I wouldn't take it out and bash it on the driveway....if it leaves the house, its on the curb.

Nice! Thank you for sharing!!!

My 3yr old Southern Motion power recliner is *not responding. Footrest will not retract.Power cord is replaced. Wall socket is good. Yes* green light is on transformer. Flipped over chair, to ck connections & wires. Located one small area on wire "showing exposed copper wire". Have attempted to locate repair person, in New Orleans area. Husband is *not happy. Need help, please.

Hello, I am looking to repair my broken recliner mechanism. The side push bars are bent outwards. The part is RMT75A05. Do you know where I can get this part please?

How about disconnecting an arm? (In my case the sections are connected to each other via interlocking brackets.)

Thank you so much for useful information.

Yes, what method should I try, taking the switch from the non working one and test it on the working one, or is there another method to troubleshoot?

My chair just stopped functioning. I have re-seated all of the wired connections. Tested another plug, the two button switch when either button is bushed motor turns on and sounds, no motion (switch has integrated USB and that functions as well. Seems to be something internally with Linear Actuator. Any suggestions?

Thank you so much

Thank you!!!!!

Mines loose and won't close

My Ashley Recliner (4661425) appears to use AT LEAST 2 springs to keep the footrest closed.. but maybe 4... is that possible? One spring went flying off and is 4 5/8" long (11/16 coil diameter, 1 3/4" 20-turn coil body).. but there's another that's broken but looks like the standard 3 1/2" long spring. Despite the mechanical frame looking totally symetric, the 3.5" broken spring is only on the left side! And since the other broken spring that flew out looks different, not sure if the recliner uses 2 sets of each.

I hope this is just a demo of how to finish a piano case because this Cable drop action spinet might be worth $200 if that. Not speculation, I sold one pretty well regulated and in tune for only $250 and they sound like crap. My point is, the job you did far exceeded the cost of the piano. I do admire that you did a good job.

Where is your shop? I rather remove it and try to bring headboard to your shop or you can pick it up. I'm in NY, are you located any places Round here?

Show how locate where springs go on my Ashley recliner they both broke

Oscillating saw - clever. And here I was prying and levering and pulling with pliers, making sure there were no sharps left anywhere. It took HOURS. And there you are - zip zip done. Makes a difference when your time is your money. Good tip.

Wonder if the mechanism is universal? The right side of my recliner is bent

I bought a really nice used chair recliner in two parts. When I went to put the back on only one side slipped in and I couldn't get it to unlatch so I could do it right. Your video took the guesswork out of it and I was able to install it properly- Thank you so much for this instructive video. 77 year old grandma ( lol)!

I can use sand for.cats

What psi are you running? I got this blaster and ain’t touching the finish on my table. Bouncing right off at 125 psi

Thank you so much for the time to educate the uneducated on refinishing. I have a piano I would like to refinish. This gives me more knowledge and a lot more confidence that when I attempt the work I can be successful.

Very helpful thanks !

My headboard has the wood around the faux leather. I would love to see one where you took the leather part away from the wood frame. Thanks!

If I push on the bar in the middle doesn’t go back all the way so my foot rest won’t stay closed

I have a manual Lane recliner that recently had its footrest break, when fully extended, the handle over rotates and it falls to the floor. Not finding anything obvious underneath to tighten, have any insight? Happy to share pictures. Thanks!

How much to do that

Ty I fixed my dad’s electric lay z boy. Cheers

How do I take my headboard apart

Please forgive my ignorance, but does this just plug into a wall or does this have to be connected to air compressor?

cher

Thank you! How do you call the thing where the leg screws in? Loved your video , short and sweet ❤

Intro way too long!

2:57 I have these on my Lindyn Sectional and desperately need to move the pieces. Can you explain how I can do this?

Thank you, super enlightening! 👏🏻

What compressor power did you use

My recliner stopped working. It has usb ports also that are not working any ideas on the issue?

I have obtained a Gibson power headrest dual motor power lift chair (model 121841) that has no remote to operate it. How do I go about getting a remote for it? Badcock (where it was purchased) has closed their stores so that is not an option in to obtaining one from them? Any advice.

Oh, thank a lot.

Shoo! Great to know that one of my client’s well-loved chairs just had a loose cable. Thank you for this!

What hose adapter did you use. Are you still using it and recommend it?

This was awful he didn't show the connection with the pins or explain how many pins there are. Or if an adjustment needs done to reduce from 5 pins to 4 pins. Guys tell the whole story .

You are a life saver! Tysm for this video!!!! Can you please tell me where you got the leather from and the exact color? For years, I've been dealing with this torn-up California king headboard. The bed is sentimental to me, but it's in such bad shape that it's stressing me out peeling and shedding for so long. Also, I don't have staples on my headboard, but it has round circular metal pieces embedded into the edges of the leather. Do you know if those are removable, and if I could use a staple remover to remove them as well?

Thank you! Helped a bunch!

Great video. I had the exact same mechanism on mine