Helped me fix my problem rear door speakers work now just as you said blue solid with blue and white antenna

3 years later they are now $60 but still probably better then plastic magpul sights

4wheel switch 99 chevysub all lights stay on

Why does it take you 30 minutes

My pressure washer takes just under a minute to fully open the choke. I replaced the auto choke with OEM, still does the same, drives me nuts, sputtering, and bogging for the first minute. But when it's open, it works great. Thanks for the great video.

Huge help. After market unit I had sounded horrible before I connected the blue wires. Where’s the amp?

BRO SAVED MY LIFE REPLACING MY DADS LOCKS

Can you do a video on using CRC Mass Air Flow Sensor Cleaner as a safer alternative than standard carburetor spray cleaners, for (the newer, black) plastic Briggs and Stratton carburetors - or maybe something like CRC 05103 QD Electronic Cleaner, as another safer, secondary alternative . . . or maybe even on comparatively, which of the two would be the better / safer alternative, and why? Seems like no one else has done this yet. Thanks, in advance.

Dude, pull the fuckin key out of the ignition next time. That noise is making me crazy

This video was spot on. Remembered I had a crow bar like that and it came right out!! Thanks!!

I REALLY appreciate this video - same mower, carb style, stupid useless auto-choke. Going to replicate your fix!

Awesome! Thank you for this easy to follow video. I'm building my coop this week. I had no idea how to build it until your video. Good job.

Sure wish you had better camera angles and showed better details of what you were doing

Thanks man was out their till 1am I’ll hit it again tomorrow lol

255$!!!! Boy you gotta mf deal

❤😂og youtube

❤got my today.

COWBOY respect

Dude your are amazing put a splice connection to the wires and rear door speakers came on thank you i appreciate it a lot

just got my s&w shield 40 compact 2.0 3.1" barrel performance center with tritium night sights. they tune the action, i don't know what all that means! the trigger is smooth with a crisp break and a close reset. very hard to rack at first but after 200 dry cycles its ok, the fit and finish is beautiful no complaints. was at my ffl in 5 days from buds. need to go try it out!

Thank you a lot for making this video I am making the same exact flight in two weeks with a rifle and this made it so much easier

good video,we tried everything to remove axle housing even a Hilti Cement jackhammer on the other side,still no movement badly stuck,any other suggestions?

Drop a link for that pry bar please and thank you.

Grease the hell out of the new axle before you install it

Thanks man. Im running a New DB15 myself, just got the reflex from them too plus the magnifier

does it automatically shut off once it reaches a certain temperature?

Still can’t get the back passenger speakers to work hooking up those wire and I have the amp turned on in the receiver

thank you for posting. what, if anything, connects to the white plastic hose barb above the black plastic fuel inlet hose barb ? what's the purpose of that white plastic hose barb ? thank you.

Thank you very much

This video was a heaven sent for changing handle on a 1997 K1500 truck. For others, note the trucks have a one way air valve(plastic piece with rubber flaps hanging from it) riveted to the lower rear of the inner door panel so you will need to either remove the whole inner door panel or drill the rivets out to remove the valve if you should unfortunately drop the socket or bolt that secures the handle inside the door. A wobble extension worked perfect on this end in lew of a universal.(only could find my impact universal joint which wouldnt fit through door panel hole) Thanks again for the in incredible video, saved much valuable time.

Your vid’s help me with my 99 Yukon especially when the back speakers weren’t working with new radio..so thank you bro

Thanks for the Info...just did mine!

Struggling with this right now, such a piss off

Did you have to pay extra for counter service ($80) self help is what I have? First time traveling with firearm on frontier

Thank you I didn't know where the carb was?

What's the Annoying sound

Damn plastic crap is good stuff, I've even split the mainjet holder to totally clean it out.

I drilled that out the main jet with a .020 drill bit (.5 mm) and it never ran better !! Made a HUGE DIFFERNECE ! [ The jet you probed at 9:40 into the video. .. the little brass insert in those seems to have poor quality control. Under a microscope the venturi was jagged and may not have been properly milled or molded. Older jets are in the .028 range, but .020 works great. ]

I am interested in more chicken videos! I have 4 pullet hens ready to go out this Easter weekend in Loveland, CO! I love them so much and I know we will have some more temperature drops, so I want them to feel safe and comfy. Thank you!

how did you lock your case to your luggage with that bike lock?

This was the ONLY video I could find on the internet for the BACK door (not tailgate door). It is a very different setup than the front. THANK YOU sir. Much appreciated . I'm attempting to do this as I did on the front door...without removing the bracket rivets. It was much easier access on the front, so I'm trying to steel my patience. Wish me luck. On the fronts, I realized I'd be re-using the OEM brackets already. I had to use my chainsaw blade file to file out a tiny part of one hole which I hope I can manage inside the back door. If I can just unbolt the actuator, I'd prefer to do that. I'm disconnecting both rods for easier access. (The door lock rod is a beast!) And these back doors are tight! Additionally, my '99 Crew Cab does not have the nice stereo upgrades that the Yukons have. I wanted to add a speaker in the rear doors (which I assume I'll have to also wire from the sail panel speaker feed.) I was befuddled when I removed the door and there was no speaker hole behind the grill! I wish you had Flashed the rear side of that plastic panel a bit more. But I was able to determine that #1 the speaker does attach to the panel unlike in the front where it attaches to the door metal. #2 I will have to cut a hole in the door panel to mount the speaker. I'm still trying to figure out their method of mounting the speaker but I can probably find some info on that elsewhere. I don't have huge confidence in those plastic panels supporting a speaker that vibrates all the time. Maybe I can add some huge washers. Now, on to Crutchfield to find some Speakers. I'll probably try to match the Polks I put in front last year. They seem to be working well. Thanks again for the effort brother . I'm sure putting these videos together is no party. That's why I'm not doing it, though I'd like to.

Thanks a lot man video really help my to reconnect that rod took me almost all. Day your method took 2 minutes

Thankyou so much because I have the exact same model with the same exact issue ,I bought it off a private owner for $25.00 but the engine runs strong but that's all it doing ,my track aren't moving either,I have a question if you don't mind answering ,it would be if great help ,did you order your belt online or where did you buy your belt ?

I got a Toro mower with that engine and it never ran right from the start. Engine cuts out constantly, especially when the temperature is higher. Cleaned the carb, replaced it but nothing helped. Those plastic carbs are complete crap.

Thank you it worked. Lol.

Awesome work sir I have something similar I want to build but with dog eared fence wood and some old 2x4s and chicken wire. It won't be as fancy as yours but I do like your idea thank you.

Brother thank you. You were absolutely correct.

Where did you get the hammer from

Most the video on here are over 20 min with no info at all ,,you fix my problem in less than 4 min!!!! Very good video thanks man God bless you !!!!! cheers !!!🍻🍻🍻🍻

WHY DO SOME HAVE AUTO 4WD AND SOME HAVE A BLANK SPACE UNDER 2HI? I just bought a 99 1500 4wd and it has a blank space but I can press the button. Am I going into auto 4wd when I press that blank space? Also driving in 2HI the truck has less power than if all the lights are off as if nothing is active