Denb7

Пікірлер

@IAmGodhead 13 күн бұрын

I love your big belly

@KT_One Ай бұрын

There’s a clip on the right side that lines up with the side panel you’re supposed to use to hold the carpet up. No bungee needed unless your clip is missing or broken.

@johnnyzee383 Ай бұрын

My good God almighty do not tell me you started that car with no oil in it... My old man used to say a little knowledge is dangerous... And you are very very dangerous... So many things wrong in this video... That car calls for 0w 30 not 10W-30 FRAM oil filters are the worst in the business you did not tighten up the oil filter tight enough and you didn't put any oil in it to prime the pump... Because you started it without any oil in it you have damaged the bearings and probably the camshaft as well. This should be an example of a video on what not to do for an oil change

@RCDec Ай бұрын

thank you so much!

@deanh2811 3 ай бұрын

It’s not about distance travelled with no oil, it’s the fact you started it period, with no oil. Terrible on your part 👎

@deanh2811 3 ай бұрын

Shame on you for running the engine with no oil! Extremely poor video!

@deanh2811 3 ай бұрын

You know why it’s only trickling out? It’s because you have the back of the car to high, most of the oil is resting towards the front of the oil pan

@lmoell787 3 ай бұрын

What about brake dust cleaner. It works great and much faster. 😊

@Denb7 3 ай бұрын

Great, if it works, but I use what I have on hand.

@IAmGodhead 3 ай бұрын

Love your videos. Thanks for posting.

@haigha-qb4kf 4 ай бұрын

The dust protection cuff of the brake piston shown is defective. And the work is much easier if you also unscrew the second brake calliper screw. Frankly, I have also never seen that someone only changes one side - everyone always advises against it.

@Denb7 4 ай бұрын

#1 The dust boot did not retract properly on the first try. It was not damaged. However, before I completed the job I repeated the cylinder compression and the boot did set properly along the cylinder. The video has a full screen pop-up text explaining this. #2 No need to unscrew the second caliper screw if the job can be completed without doing so. #3 The video shows only one side being done, but the other side was more of the same, so I only showed one side.

@richarddebiasi181 4 ай бұрын

Thank you

@asel3049 5 ай бұрын

More videos like this please! Cheap Guinea pig ownership is something I’m looking at right now

@YouThePeople. 5 ай бұрын

Time to try this.i literally have over 50 use sticks of deodorant where I keep throwing them in the bottom drawer just in case I ever run out I might be able to get a little use tull u get more plus so many of them actually detached on their own when it got to low and just became a pain trying to use it so then id just cap it and get a new stick so there's quite a few sticks with a forth or more of deodorant still there.i hope this works.

@Denb7 5 ай бұрын

Good luck. Just be sure to go slowly doing small amounts at a time. Otherwise it'll melt through and come out the bottom. It's better to add a small amount onto a half stick than add a bunch onto an almost empty stick.

@YouThePeople. 5 ай бұрын

@@Denb7 thought I had already responded but I filled them before I read your message and yes on some of them it did come out the bottom but quickly dried and I just remelted it and to be honest so far so good.this was perfect timing for me because I like to stock up and have supply on everything and I was about to go spend around $25 on deodorant but after doing this I was able to make 8 full sticks from all my left over sticks.i used a Styrofoam cup which was easy to Pour from.Saved me about $25 or so.Thanks!!

@BradCarpo 6 ай бұрын

OMG 😳

@surethings6350 6 ай бұрын

I wonder if this works for native

@melvinamenard3972 7 ай бұрын

Hello

@kenthefley2226 7 ай бұрын

I could spend hours tinkering around in a shop like that.

@BennyCFD 7 ай бұрын

Nothing new............

@Denb7 7 ай бұрын

You are correct, but the purpose of this video was merely to answer a question from a friend of mine.

@georgesemple8136 8 ай бұрын

please dont do what this guy says,no oil in filter or engine,you only need to listen to it.never do this

@CMSchwarzenbach 8 ай бұрын

It's a WHOLE DIFFERENT show from THIS point of view, I swear! Absolutely, Positively, Doubtlessly amazing by everyone on that stage and behind the scenes!

@Denb7 8 ай бұрын

I hope you mean that in a good way Carl!

@robertrossi2863 8 ай бұрын

I've tried other ways to use every bit of the deodorant but I think your way is the best

@DanSkunk 8 ай бұрын

I figured that out on my own. Also will stick tiny soap pieces to a new bar.

@josephsias4922 9 ай бұрын

Sir, your video may be dated, but it sure does carry useful information! I just did everything you did and now my wife's AC is blowing great!! Thank you!

@Denb7 9 ай бұрын

Thanks. I'm glad you found it helpful.

@STuber2023 9 ай бұрын

2:03 The Watercolor effect can be Cartoon on Windows Movie Maker 6.0, so between WMM 2.6 and WMM 6.0 are huge different

@Denb7 9 ай бұрын

Congratulations on being the first comment on this video in 10 years! I never expected it to ever get any more views. I gave up on Movie Maker a long time ago, after Microsoft made major changes to the program and took away the features that allowed creativity. They dumbed down the program so much that I switched to editing on an iMac. Maybe I'll try revisiting Movie Maker again... Thanks

@svenfernandes 10 ай бұрын

life saver! 🙂

@Denb7 10 ай бұрын

Be sure to check the brushes. See the link in the description.

@hdashnau 10 ай бұрын

This video is excellent. My 2008 Smart just ran into this same exact problem yesterday. The video was very detailed, answers the questions I had and worked around the same issues I faced. I was able to open the tailgate hatch following these instructions.

@Denb7 10 ай бұрын

Glad it helped

@Zeezu70 10 ай бұрын

I'm curious if the motor actually works after reinstalling it though?? I bench tested my blower motor by connecting it to a battery and the motor worked fine, but it wouldn't activate while installed.

@Denb7 10 ай бұрын

The motor worked fine but was a bit noisy for a while until the brushes wore themselves smooth.

@Zeezu70 10 ай бұрын

@@Denb7 Can you supply a link to that eBay seller's page where you purchased the replacement brushes? I searched for that seller, but no luck. I'm looking for the wire pigtails harness for the blow motor

@Denb7 10 ай бұрын

@@Zeezu70 Sorry dude, but I don't have any idea who the seller was. I was just lucky enough to find a guy who was selling those specific brushes. I wish I could be of more help.

@Zeezu70 10 ай бұрын

@@Denb7 No worries, thnx. The seller would be in your eBay purchase history, but if this was back in 2019, I'm not sure purchase history would go that far back?

@nickyfeabathgate4687 10 ай бұрын

The top part of my boot flaps and I have mould. How do I fix it?

@breannarose1488 10 ай бұрын

Thankyou!

@tamaraallen4819 11 ай бұрын

I have five saved to do when I can 😂

@Denb7 11 ай бұрын

Don't add too much hot liquid all at once or it will melt through and leak out of the bottom. That's why I just do one at a time instead of saving up a bunch.

@deirdre444 11 ай бұрын

Thank you. I sure wish you had a video of you replacing the rotors and another replacing the rear drums and shoes. Thanks Denis!

@buzzybeemee4254 11 ай бұрын

Love this one..going to do this one.

@OhMostBobulousOne Жыл бұрын

I loved this video, read all the comments and was surprised to see that no one mentioned the blues music added to the video. It made a good video great! I also got to thinking that if this were antiperspirant which contains aluminum, maybe it could be melted in a metal ladle held in a cup of microwave boiled water, it seems worth a try. Yes, I am a cheapskate too.

@Denb7 Жыл бұрын

Thanks for the compliment. If I recall correctly, the blues guitar was played by a friend of mine. I know about the aluminum used in antiperspirants, but I never use antiperspirants so I've never tried it. Good luck in your goal of saving a few cents with every package.

@ingmarlangerak8973 Жыл бұрын

Big mistake to start the engine before you filled it up with oil! You are sure not a mechanic!

@Denb7 Жыл бұрын

I never claimed to be a mechanic, because I'm not. The engine ran for 33 seconds at an idle speed with only the residual oil in the crankcase for lubrication. Sure, there was no pressurized lubrication (evidenced by lifter noise), but a measurable level of damage would be no worse than repeatedly cranking an engine that refuses to start.

@yanninromero628 Жыл бұрын

Thanks for this video ❤

@donnamcgown5175 Жыл бұрын

Love it...new subscriber Dina

@hankaul6256 Жыл бұрын

You are breathing so hard

@Denb7 Жыл бұрын

Thanks for noticing that I'm old, fat and out of shape.

@Lakillika Жыл бұрын

ty for the info !

@crumplezone4286 Жыл бұрын

Thank you I hate that shit when it goes through the holes and gets wasted

@SEMOHify Жыл бұрын

Not a cheapskate,frugal. We grew up with depression raised parents. “a penny saved is a penny earned”. We would reuse foil,saran wrap,plastic bags, wax paper, paper lunch bags,etc.

@yuidfbse Жыл бұрын

Smart ForTwo what? Diesel? Gasoline?

@denisbessette3616 Жыл бұрын

Gasoline.

@jc-pj3nh Жыл бұрын

Thanks a billion, i am trying to install a license plate back up camera and could not find a video showing how to remove/loosen up the tailgate storage panel for my 2008 Smart car so i could rout the backup camera cable. Your step by step video was a tremendous help. Again thanks.

@jurgenberg5941 Жыл бұрын

Super Video! Gut, das du beim Einbau keinen Schottenrock getragen hast 😂 Viele Grüße aus Deutschland

@denisbessette3616 Жыл бұрын

Ich stimme zu Danke fürs zuschauen

@crozolrebeu Жыл бұрын

Thanks man , clean job

@armandospalluto7375 Жыл бұрын

My 13 years old MHD Smart has started to suffer a little bit for wear and tear. thanks a lot for your useful and detailed info about mechanisms, eventually I can repair the back lock which doesnt work anymore. Blocked in closed position.

@randaldeffenbaugh228 Жыл бұрын

Really appreciate this video! Just repaired mine using exactly what you said to do. It was absolute genius to use a power drill, clamp and super fine sandpaper. Thanks a million. By the way I am 63 LOL!

@garytowne1548 Жыл бұрын

Excellent detail on where things are and clip tricks needed to work on it. I also notice that there appears to be a square channel in the motor housing that connects from right near the brushes through the firewall. Might be a fresh air inlet. I wonder if some combination of compressed air, vacuum cleaner and/or a touch fog of WD40 through this channel might solve the problem without dismantling.

@kovesdybalazs3198 Жыл бұрын

Le engedi az olajat, után meg elindítja az autót? amatőr 😂😂

@KathyCarCamps Жыл бұрын

This is great! You make it easy! Thank you!

@Outdoorsy368 Жыл бұрын

My momma always said waste not want not!

@denisbessette3616 Жыл бұрын

I've been doing this for years. No deodorant is wasted. Unfortunately, tons of plastic is.

Ең жақсы KZbin

Пікірлер