i would have dropped few spot welds to give it more metal instead of bending it. like 10 small spot welds all around it but good video.

My 08 dodge pick up just recently started to make this noise pretty loudly, would it be best to change the driveshafts all together or repair the u joints?

frikken neck of the starter where the rubber gasket goes around the collar broke when twisting the starter out! Thank goodness I could fish out the broken bits with a screwdriver. Thank you for making this vid. After cleaning up the hole where the starter gear goes in, putting in the new starter was a snap! Thank you! (2000 Trailboss 325.)

Great video!

Hello! Can you please write the dimensions of the seals and bearings?

Thanks for the video.

I cant seem to get the bolts out to remove the starter. They hit the plastic and i cant bend it enough. Bottom one is hitting before its even unthreaded all the way.

Very good thanks.

Same shit my outlaw 90 is doing. I wondered where the steel ball came from, sotting in the "cup" of my jack, when i raised the axle up like you did.

Looks simple enough to work on. I imagine the lawnmower repair shops have more than a few sitting around for parts. These trannies were pretty popular with mtd products.

good vid! Actually the ONLY vid on the 1040 Automatic...TY!

I’m going a single “pop” sound from the back when I accelerate from a stop on my frontier. Everyone saying u joint but visually I am not seeing anything wrong with them

I'm a toyota tech (not a master, but gettin there) and this is unacceptable work. I dont know how they could have got it that wrong. They didnt use a guide support piece for the inner race when pressing the spindle in and it was clearly not centered flat. They should have noticed it didnt spin and not let it go to the customer

Thanks

That sounds like my ankle.

Awesome video

Could you please tell me what the Shift Rod bearing purpose and how do I get it back in place. I would appreciate you’re help. Ty

here what you would of needed Rock auto parts TOYOTA > TOYOTA > RAV4 > 2.0L L4 > Brake & Wheel Hub > Wheel Bearing & HubMEVOTECH H512213 BXT / Supreme Info Rear; FWD; w/o Anti-lock Brakes < Part image > $43.89 Add to Cart MEVOTECH H512212 BXT / Supreme Info Rear; FWD; 4-Wheel ABS (ABS Sensors on all 4 Wheels) < Part image > $62.79 Add to Cart MEVOTECH H512338 BXT / Supreme Info Rear; AWD < Part image > $69.79 Add to Cart NSK 58BWKH03B Info Rear; AWD (Only 1 Remaining) < Part image > $83.79 Add to Cart RAYBESTOS 712213 {#4241042010} Info Rear; FWD; w/o Anti-lock Brakes < Part image > $84.79 Add to Cart MOOG 512338 Info < Part image >

And wadda ya want to bet that the reason for that is a lift kit? Guys are quick to get er up in the air just a few inches! That shouldn't hurt anything right? Wrong! The drive line is knocked out of phase which causes the bearings to start digging into the trunion which is the center piece shaped like a cross. You need seven degrees negative angle to straight with the pinion yoke to make it right. That way it will pull itself straight from the counter force of the pinion gear climbing up the ring gear when you apply the gas and the driveline is under a load.

Easier to do it yourself...you can rent the press for free from autozone

They prolly pressed the hub in without supporting the inner race

lol i wish i watched this before mine broke this morning

Wish ur wife knew as much as you, to see the mechanic face when she pointed this out to him 🤣

Where did you get the bearing? Part #?

Not a true hydro transmission , it's a constant velocity transmission , just like the ones in the Troy Bilt and yard machine lawn mowers it uses belt tension provided by varying tightness of the belt aka foot pedal depressed to go faster or slower , I know I have seen many yard machine riding mowers with this same type transmission and they always seem to start making a whining grinding noise before they just stop working

That sounds like bad arthritis😖

Love to hear that phone call for the chewing. I hate poor workmanship.

This video saved me a lot of headache today. Thank you for making this.

Lol wish I had a go pro on when I snapped one on a Cherokee lol. Ding ding ding ding! Followed by some 4 letter words

You think the pipe has to be in there ?

Did yours ever squeak mine doesnt clunk but it just started and mine is a squeak sounds like coming from rear of my truck only when I accelerate and I cant hear it after 20 to 25 mph please not mine just started and its squeaky not clunk

Is that what causes a humming sound while I drive my truck?

My 2006 Silverado makes a popping and cracking noise at low speeds in drive and reverse. No noise when shifting from park and you have to be moving. It quits once you go about 15 and up

Good video, I just took mine apart, the drive shaft teeth were worn. Question: there is a ball bearing that sits in upper casing that holds this "gear changer" in place. The three grooves determine the gear. When you reassembled, where did you set the shaft? fwd, neutral or reverse?

So my GMC Canyon vibrates at around 50mph or higher when I release the gas. I also have a chirpy squeak sound when im below 15mph. Ive been trying to look up some info online but am finding mixed answers. One constant answer was the U-Joints going bad. Can you tell me if you had the same experience so I can confirm its the U-Joints ? Thanks for the video ✌ 😊 ✝ ❤

THAKS LOOKS LIKE A COMMON PROBLEM WITH THESE.

My truck jumps and jerks around 45 50 could this possibly be my problem?

I wish you could of showed you removing the bearings. Sorry for the thumbs down. Keep KZbin ing

Ease replacement kzbin.info/www/bejne/Y3nRdH-Zmr-EoLs

How do you know if the bendix needs replaced also.? I bought a bendix too, but I would rather do it your way if I can, and not replace bendix if i don't have to

hello, thanks for the video, I am writing to you from Italy, I have a problem with my lawn mower, with the forward gear if I am going downhill it picks up speed and you can hear a noise at the transmission (continuous beat), which it doesn't do if I go downhill in reverse. What can it depend on? Thanks Marc

Thanks for the vid. Nice and simple.

Excellent video, congrats. A great help

Did your battery light come on?

Thank you for this video! way more informative because of that demonstration!

Good job!

All mine needs is a starter

Thanks bro.....same sound exactly!

How did you get bolts out of behind brakes, and how you get bearings out

Thank you! Same happened here, and the same model. Again thank you!