5 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@ronswansonsdog2833 Күн бұрын
1:37 omg I thought my washer was going off but it was the video 😂 and I’ve had this thing for 10 years & never knew this…soI can’t wait to see what’s inside there
@SOBIsHobbies Күн бұрын
@@ronswansonsdog2833 Let us know how it went for you. 😅
@richardplymale1931 2 күн бұрын
Thank you. Abig pain solved.
@SOBIsHobbies Күн бұрын
@@richardplymale1931 of course! Glad I could help! 😊
@cmcmmcmc 3 күн бұрын
Just took mine apart, should have just did what you did, 100% easier then taking 50 screws out and breaking every tab.
@SOBIsHobbies 2 күн бұрын
@@cmcmmcmc Thanks for your input! Sorry, you had to go through that struggle. 😅 I also did think about doing it in a more formal/cleaner (if you will) way but upon inspecting the tabs and the way how the outside frame was put together I figured it’d be better if I just cut a hole underneath and replace it that way. Not to mention the cutout side was going to be beneath the machine where it would not be visible anyway. And it worked out for us. My wife is still using it to this date. It’s probably been over 10 years since we had this bread maker and it’s probably been 2 years now since I replaced the belt. It’s still working like a champ. Hope we can squeeze many more years out of it. Cheers!
@jamesdelong6401 3 күн бұрын
Are you resting your knee on the barrel / hand guard? Wish you did this in normal speed and explain what you were doing
@SOBIsHobbies 2 күн бұрын
@@jamesdelong6401 Yes, I was resting my knee on the handguard. I put a couple of layers of towels over the handguard and rest my knee over it while rotating the muzzle device. Hope this helps.
@jamesdelong6401 2 күн бұрын
@SOBIsHobbies Good evening. Ok.
@ItalianoAnt516 6 күн бұрын
Soak the top piece in a bathtub with bleach and water
@f1f278 8 күн бұрын
BTW.... i own both Front and Top Loader LGs..... never EVER had the gunk issue with the Front Loader....Top Loaders are just flawed by design and we have to do this crap to clean it every now n then.....SMH... Will never bother with a Top Loader as the Primary washer... 😊
@syeung8 13 күн бұрын
What do I do if I broke the tab off trying to push it?
@SOBIsHobbies 12 күн бұрын
Unfortunately, there isn’t much you can do at that point since these are mostly all plastic pieces. Were you able to remove the shelf? Or is it stuck now?
@clintonmoon7591 13 күн бұрын
Great video! How much of the board can you step on? I have a 2019 4Runner Limited and the stock boards only allow about 4 inches of my foot on it.
@SOBIsHobbies 12 күн бұрын
Thank you! The stepping surface of the board is about 5 inches wide. Here’s the link to these running boards if you’d like to check them out yourself. Hope this helps. amzn.to/3UU0OZo
@alexbe699 14 күн бұрын
How do to set your the time? What are the best settings?
@p47rr 15 күн бұрын
Just made an offer on a 16 & 17. Fingers crossed. 🤞🏻
@SOBIsHobbies 15 күн бұрын
Nice! 👍 Good luck!
@ChristopherMcCulloh 17 күн бұрын
After I got the agitator out, I took it out back and power washed it. I was able to get the power washer between the white plastic part and the chrome top part and flush a lot of that crap out of there. I also washed the inside of the washer and was able to knock loose a lot of sludge in places where I couldn’t reach it.
@SOBIsHobbies 16 күн бұрын
@@ChristopherMcCulloh Thank you for sharing your experience! 🙏
@stevzky 17 күн бұрын
10mm socket... FUCK!
@conniebenton537 19 күн бұрын
OMG THANK YOU!! This has been driving me crazy!
@SOBIsHobbies 19 күн бұрын
Of course! I’m glad my video was helpful. 😊
@erickullmann9037 20 күн бұрын
Thank you. I am embarrassed to admit it, but I never considered flipping up that flap. I have rebuilt cars, motorcycles, engines, transfer cases you name it. I've been changing wiper blades for 40 years. And, I didnt think to lift that stupid flap. lol
@SOBIsHobbies 20 күн бұрын
It’s all good, sir. We all live and learn something new every day. 😊 Thanks for your input. Cheers!
@Mr.VilkoBS 21 күн бұрын
thx
@SOBIsHobbies 21 күн бұрын
You’re welcome! ☺️
@ZyneishaGreen 21 күн бұрын
Thanks i will definitely try this
@SOBIsHobbies 21 күн бұрын
You’re welcome! Be sure to share your experience after you try this method. Thanks!
@ZyneishaGreen 21 күн бұрын
@ will do
@albanaselim1355 22 күн бұрын
I also found your video so helpful. Thank you for sharing your tips and tricks 🙏🙏
@SOBIsHobbies 22 күн бұрын
Of course! 👍 You’re welcome!
@mariedelucca7912 24 күн бұрын
Bro your channel in so underrated 💯 💯 you definitely 🔥🔥🔥guns
@SOBIsHobbies 23 күн бұрын
Thank you!! 🙏😊
@joegarcia8447 24 күн бұрын
Why did you replace the muscle divise ?
@SOBIsHobbies 24 күн бұрын
Nothing was wrong with the original muzzle device. It’s just I personally am not a fan of the bird cage muzzle brakes. 😅 Plus, I wanted to try something different.
@joegarcia8447 24 күн бұрын
@ thx I host got my first AR FN TaC 3 and I’m like a sponge just learning from other 2nd amendment team just heard there kind of to reduce the recoils and the to change the gas direction 🙏
@SOBIsHobbies 24 күн бұрын
@ of course. So there are muzzle brakes that’s intended to keep muzzle rise low and help minimize recoil. And there are also flash hiders that’s intended to minimize flash level when projectile leaves the barrel. It’s great for hiding your position when shooting so you don’t give up your location. And there are also what’s called hybrid devices that are half flash hider and half muzzle brake. They may not be as effective as dedicated ones but they’re just enough to do the trick. It’s all about what you’re trying to achieve with your application. Hope this helps.
@marklloyd4153 25 күн бұрын
I wouldn’t have done that . The Toyota arm is much better . What you do is when you take the arm off you can see one end that is closed and one is opened . You pull the closed end with your fingers around it pulling out the length of the rubber wiper with two metal rods out . Take the metal rods out and with your brand new wiggly rubber inserts put the old metal rods in them like they were in your old rubber inserts. Then hold it together and lead the open end into the arm and feed it through til you feel it go in good . The car care nut has a very good video on this that is actually better than my verbal description . The Toyota design arm for your windshield wipers is far superior to any aftermarket product at auto parts store . Buy the arms and the metal rods and the rubber inserts next time and bring it back to OEM . The little rubber inserts are so much cheaper than the Bosch or any other brand and better quality to
@black90lab 26 күн бұрын
How is the ride quality? Are you getting a more supple ride or it is more harsh? The Ironman 2.5” kit I installed is too rough. Looking for a more supple ride.
@SOBIsHobbies 26 күн бұрын
@@black90lab it is on the firmer side but it’s not too firm either. Definitely better than stock suspension that truck originally came with from the factory. If anything it makes this truck feel more like a car when driving. OEM shocks were too mushy and on pavement driving felt very bouncy and wobbly. This kit definitely addressed that issue. There were two valving options available with this kit when I was getting them, one was softer valving whereas the other one was firmer valving and I went with the latter. I wanted a bit stiffer ride because I wanted to add some overlanding accessories to it so that added additional weight would balance the ride. After 3+ years I’m still happy with my purchase. Can’t complain.
@naludog8087 26 күн бұрын
@@SOBIsHobbies Bro...thank you for the quick reply. Have a great weekend!
@SOBIsHobbies 26 күн бұрын
@ of course. 🫡 Thank you! You do the same!
@joebassfish 26 күн бұрын
This video could have been 2 minutes
@stanurquhart6433 27 күн бұрын
I have an LG washer about12 months old which started to have sludge. The centre cap was much easier to remove, the lugs holding it are not as big. Then the bolt on the agitator was still 10 mil. The agitator was very easy to lift out and my wife just used white Vinegar to clean it. There was no sign of any rust and it came up like new. This video gave me confidence to attempt the job.
@SOBIsHobbies 27 күн бұрын
@@stanurquhart6433 thank you for your input and shared experience! 🙏
@viralynn8120 Ай бұрын
Thank you!
@SOBIsHobbies Ай бұрын
@@viralynn8120 you’re welcome!
@VectorAxus Ай бұрын
You must have had to go buy that 10mm socket just for this project lol. Nicely done
@SOBIsHobbies Ай бұрын
@@VectorAxus 😂 That’s one size socket where I have multiple backups. 😅 Thank you!!
@marcialmontecinos1057 Ай бұрын
The same camera as you and I noticed is not working inside the vehicle any recommendations?
@SOBIsHobbies Ай бұрын
@@marcialmontecinos1057 Hi. It sounds like the charging cable that the camera came with is either faulty or defective. Also have you tried to plug anything else to your car’s cigarette lighter socket to make sure that it’s working? I would start my investigation from there, personally. Hope this helps.
@marcialmontecinos1057 Ай бұрын
@@SOBIsHobbies hello sir that's exactly what the problem is 12v cord is defective. I ran some test yesterday. I made a call to the company got a phone call back took Pic and should be receiving the new one in the mail by Monday. ❤ I really like the camera very lightweight but it's a 2020 model.
@SOBIsHobbies Ай бұрын
@@marcialmontecinos1057 that’s great to hear that company is standing by their product and sending you a replacement cord. 👍 It might be a bit old by today’s standards but I do really like this dashcam as well. I like it so much that I have the same model camera on all of our four vehicles. 😊 It already came handy once where my camera caught a hit-and-run incident where perpetrator hit someone else’s car and ran away. I was able to share the footage with the victim and they said it was very helpful.
@marcialmontecinos1057 Ай бұрын
@@SOBIsHobbies I called the phone number customer service on the box and I got a call back the same day which I was so happy to speak to somebody. Yeah I'm really happy with the outcome that they stand by their product and gave me a call back. Yeah I've been wanting to have a camera in my car for some time now because I do rideshare. Plus I drove at night and what I noticed is that people drive more Wild on the road because I think they think they can get away with it especially truck drivers.
@SOBIsHobbies Ай бұрын
@@marcialmontecinos1057 I’m glad to hear that. I hope it doesn’t come to this but it’s always better to be safe than sorry. Have a safe travels! Thanks for your shared experience.
@QbutNotTheQ Ай бұрын
Thanks for the video. The back two clips pop out straight up, but are easily broken and the glass is too. The one front tab holding the glass down is easy to break too, and it looks like you broke yours. I broke mine too! 😊 There actually doesn’t look like there is a front middle tab on you model.
@SOBIsHobbies Ай бұрын
@@QbutNotTheQ Thanks for your input. I actually didn’t break mine (surprisingly). 😅 I did come very close to breaking it but it didn’t break luckily. These Samsung French door refrigerators have different variations but for the most part their design layouts are quite similar to each other from what I’ve seen so far.
@KristinaMikhaila Ай бұрын
Literally did everything BUT show how to set it up ...
@SOBIsHobbies Ай бұрын
@@KristinaMikhaila thanks for your feedback. I’ll make a follow up video where I’ll be demonstrating how to set it up as well.
@marcialmontecinos1057 Ай бұрын
@@SOBIsHobbieshello sir I just bought the same model dash cam from Walmart however I noticed that the cord that goes in the light socket in into the car plugs into the camera. cameras not working but when I use the USB cord inside my place my house it works what can you recommend?
@SOBIsHobbies Ай бұрын
@@marcialmontecinos1057 Hi. It sounds like the charging cable that the camera came with is either faulty or defective. Also have you tried to plug anything else to your car’s cigarette lighter socket to make sure that it’s working? I would start my investigation from there, personally. Hope this helps.
@RubyRoks Ай бұрын
Thank you :)
@SOBIsHobbies Ай бұрын
@@RubyRoks you’re welcome! ☺️
@kmc0911 Ай бұрын
Thank you! You had the only video that showed how to defrost my icemaker. In addition, you showed features of my Samsung refrigerator that I didn't know existed.
@SOBIsHobbies Ай бұрын
@@kmc0911 you’re welcome! I’m glad I could help. 😊
@rangerider51 Ай бұрын
Do you know anything about Century caps?
@SOBIsHobbies Ай бұрын
I’ve heard about them and seen few on the road here and there but I have never had any experience with them personally. Thus, I can’t speak about their build quality or reliability unfortunately.
@coreybunss Ай бұрын
Is this a filter or just a water jet?
@SOBIsHobbies Ай бұрын
@@coreybunss this is the actuator that has built in filter in it. It traps any leftover dirt and debris in the bottom of the washer machine drum.
@coreybunss Ай бұрын
Is this a filter? I don’t actually see a screen?
@Scottyman99 Ай бұрын
I'm curious if the 1-6 SFP Credo HX has a better image compared to this. Generally a SFP scope, all else being equal, would have a better image.
@SOBIsHobbies Ай бұрын
Unfortunately, I won’t be able to attest to that as I have not had any experience with 1-6 SFP variant of this scope. However, I do have Eotech Vudu 1-10 FFP and Nightforce NX8 1-8 FFP, compared to those two I would pick my 1-8 FFP Trijicon Credo any day. I feel like eye relief on the Credo is superior, glass clarity is as good (if not better). Not to mention Credo gives you an opportunity to choose between either red or green dots as reference to your reticle, meanwhile Vudu and NX8 only come with red reticles.
@PatriciaNelson-e9p Ай бұрын
Heidenreich Route
@E.M.Tucker Ай бұрын
Thank you, quick and to the point ❤
@SOBIsHobbies Ай бұрын
You're welcome! Thank you for your feedback.
@HobsonRachel-v3w Ай бұрын
Juanita Roads
@NenaCruells Ай бұрын
Thank you 🙏🏻
@SOBIsHobbies Ай бұрын
@@NenaCruells you’re welcome!
@jonathanhernandez1504 Ай бұрын
Great review. Airborne!
@SOBIsHobbies Ай бұрын
@@jonathanhernandez1504 Thank you! Airborne all the way!
@carlensbasement9147 Ай бұрын
Very helpful. Thank you!
@SOBIsHobbies Ай бұрын
You're welcome!!
@JohnCobraOne Ай бұрын
If the lid is stuck and you screwing it still won't come out. Use vinegar and let it sit overnight. See if it will come out. If not, you viniger again but run it on clean/tub mode for like 10 mins. Make sure you leave the screw unplugged! The piece should float to the top. Mine was very stuck and had to do this.
@SOBIsHobbies Ай бұрын
Excellent tip!! Thank you for sharing this information!
@Voxolite Ай бұрын
Thanks for the advice! I didn’t let it sit overnight but just let it run and it came off pretty quick.
@davidtrionfetti Ай бұрын
Does the screw gasket stay in the middle of the threads where we see it in your video, or does it move up toward the head of the screw as yourl tighten it?
@SOBIsHobbies Ай бұрын
If I'm not mistaken it stays in the middle of the threads. It's been a little while since I've performed this task but I can't recall it moving up towards the head of the screw. Hope this helps.
@davidtrionfetti Ай бұрын
@@SOBIsHobbies thank you.
@xVicissitudesx 2 ай бұрын
Gaf
@SOBIsHobbies 2 ай бұрын
Thanks!
@xVicissitudesx 2 ай бұрын
No problem man thanks for not coming back like a shark.
@cesar101471 2 ай бұрын
The spin basket needs to be washed, as well as the tub. You have no idea how much work and dirt is stored there.
@cesar101471 2 ай бұрын
kzbin.info/www/bejne/mV6shJysp5mNjZosi=FhLP2XU1Dui_jpYH
@SOBIsHobbies 2 ай бұрын
Good point! 👍
@Yaayo90 2 ай бұрын
I need for 2014, how can i find the part number?
@SOBIsHobbies 2 ай бұрын
Hi. Unfortunately, as far as I know, 2nd generation Tacoma models did not come with OEM tailgate soft opening dampers. The part number for this damper bushing is 6614304021. However, I doubt you can use this bushing on your 2014 Tacoma. You're more than welcome to try it. My best advice would be to try contacting your local Toyota dealership parts department and ask them if there's an OEM solution to address your question. Hope this helps.
@caleblong2918 2 ай бұрын
Ive been wanting to do this exact upgrade with the gg&g rail with the modlite pl350 okw, my only issue is the pricetag for both items! If you domt mind me asking where did you get the gg&g and how much did you give for it? Everywhere ive seen them are pretty much around &100... i wish i knew other reputable companies selling usp aftermarket parts for a more reasonable price!! The USP is such an amaxing platform!! Sweet piece youve got there! Ive always wanted a mk23 but unfortunately i cant afford to pick one up yet... but one day i hope to own all of their variants in pistols/rifles, god how i wish i could win the lottery lol
@eddychance4860 2 ай бұрын
Thank you I could not find anything that worked until you video
@SOBIsHobbies 2 ай бұрын
@@eddychance4860 I’m glad you found my video to be helpful. Thank you for your feedback.
@amybakerfreudigman6576 2 ай бұрын
THANK YOU!!! I've been wracking my brain trying to figure this out. SO glad I found your video. This saved me hours of frustration and potentially a broken shelf 😅
@SOBIsHobbies 2 ай бұрын
@@amybakerfreudigman6576 You’re very welcome! Glad my video could help you. Thanks for your feedback!
@jackaubert7509 Ай бұрын
Me Too. Samsung wants you to buy a new refrigerator if you spill something that seeps below the glass!! Their web site has instructions on removal of the shelf but it just says to "push in" on the tabs. Well the tabs are invisible and you need two small screwdrivers to depress them.
@SOBIsHobbies Ай бұрын
@@jackaubert7509 Agreed. Unfortunately, everything is getting super “complicated” or “proprietary” these days. Seems like vendors have cracked the code of making more profit by doing everything they can not to allow the consumers to be able to maintain their items themselves.
@garrettgibbons 2 ай бұрын
When a 30 second process becomes a 4:14 video.
@SOBIsHobbies 2 ай бұрын
You’re welcome. Glad my video was able to help you!
@metaglypto 2 ай бұрын
Just noticed your plates. ALL THE WAY!!!
@SOBIsHobbies 2 ай бұрын
Airborne all the way!! 🫡