2 ай бұрын
2 ай бұрын
6 ай бұрын
7 ай бұрын
7 ай бұрын
10 ай бұрын
Пікірлер
@edwincruz8365 Күн бұрын
Ayy bro I wanna do this to my car I’m already tuned on stage 2++ and have titanium intake and exhaust and midepipe with cats and res and headers but I might get another midpipe with no res or cats but do recommend the Camry throttle after having the vehicle now for 11 months ?
@Moneygrip Күн бұрын
@@edwincruz8365 idk what youre asking me but yea do the bigger throttle body since you already have all those mods
@edwincruz8365 Күн бұрын
@@Moneygripmy fault I just seen what I said made no sense but I’m basically asking like do you feel the bigger throttle was worth the extra $400 or so or me just stay with my throttle body spacer and stock corolla throttle and not the Camry ?
@Moneygrip 18 сағат бұрын
@@edwincruz8365 i dont think i spend $400 on it i think i got my throttle body off ebay for $100 and then i got the adpater on pre-order and yea these 2.0s are choked up big time
@anthonysanchez-op9cl 4 күн бұрын
Thats crazy, I also went from a 97 prelude to a xse rolla hatch
@Moneygrip 2 күн бұрын
The prelude was never my daily 😭 i went from a 6mt 392 challenger to a rolla hatch
@CarlosDiaz-xb8jd 5 күн бұрын
All you have to do is throw out that piece of s*!?* engine, and install a 93 , 94 13b and it will last longer. Or make it piston engine, is very simple
@Moneygrip 5 күн бұрын
@@CarlosDiaz-xb8jd all you have to do is buy your own rx8 and do what you want like jp did with his rx8 its very simple
@CarlosDiaz-xb8jd 4 күн бұрын
I buy whatever I want to buy , plus I have too many projects. I don't need another one
@Moneygrip 4 күн бұрын
@@CarlosDiaz-xb8jd then dont tell my dude how to build his car saying the first engine he built by himself is a piece of crap
@philipdennis5020 7 күн бұрын
Pretty much a plug and play?
@Moneygrip 7 күн бұрын
@@philipdennis5020 straight up
@Branflakes66 9 күн бұрын
From foggy to clean 🧼
@hechizo_coyote 14 күн бұрын
Thanks for the video, I know this is a year old and you probably won’t see it but I am having a lot of trouble with my prelude. I just swapped in an engine and transmission, I even took the entire wire harness and installed it through the whole car. The key light flashes when I put in the key, so I tried this and still nothing. It’ll crank but it won’t start. Any suggestions?
@Moneygrip 14 күн бұрын
@@hechizo_coyote check to see if youre getting fuel and spark. Check to see if the engine is timed right with the cams and crank
@eletor 16 күн бұрын
good vid
@_Juls 17 күн бұрын
Having replacement lenses as an option must be niceeeeee
@Gorilla_Jones 18 күн бұрын
Sweet mama!
@AtMyMerci 18 күн бұрын
beautiful
@Whatawhooper69 19 күн бұрын
Does you or anyone have a recommended place to buy a p28 ECU?
@user-vr4yz2fj2l 25 күн бұрын
More prelude!!!!!!!!!!!
@Moneygrip 25 күн бұрын
Its time is coming
@standyourground9973 Ай бұрын
is that a catholicism kentucky hoodie lmao
@Moneygrip 28 күн бұрын
Naw
@Emnatas Ай бұрын
I wonder how much will it eat doe?
@TimeLapseCarGuyBruno Ай бұрын
smoking like a 2-stroke too...
@Moneygrip Ай бұрын
Dude i wish i recorded the amount of 2 stroke oil he poured in the gas tank too
@kuza_png Ай бұрын
Beer for breakfast is diabolical 😂
@Moneygrip Ай бұрын
DIABOLICAL
@rodfranco-hv8tx Ай бұрын
What size wheel spacers you running in front and rear ??
@Moneygrip Ай бұрын
On those wheels i had 15mm front and 25mm rear
@yungsayin4790 Ай бұрын
10:10 , 11:18 both these got me dead 😂
@Moneygrip Ай бұрын
Hahaha
@marcogtzdev7250 Ай бұрын
Where did you tune the ME so I can tune them as well
@Moneygrip Ай бұрын
Mercedes swap shop
@geraldito7777 Ай бұрын
THANKS!...❤
@xo91o12 Ай бұрын
Does it need any tuning?
@Moneygrip Ай бұрын
No
@thomascameron5655 Ай бұрын
That does not work. I did your bypass and car won't start
@Moneygrip Ай бұрын
You have another issue then
@Your.God.is.a.Delusion Ай бұрын
Bipoc Emo Dracula and the Polish Crush. Gannon won!
@Zachthaboy5761 Ай бұрын
W
@Txnxvxn Ай бұрын
Yo, can i get the link to those headlight lenses?👀
@Moneygrip Ай бұрын
www.ebay.com/itm/196269948925?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1OKmVJS4oQH6BgLE3tbNigw32&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=196269948925&targetid=1644837435723&device=m&mktype=pla&googleloc=9003918&poi=&campaignid=20125739985&mkgroupid=149128855676&rlsatarget=pla-1644837435723&abcId=9312975&merchantid=101695170&gad_source=1&gbraid=0AAAAAD_QDh-5vYCPddRcU4ElULF0mK52u&gclid=CjwKCAjwgdayBhBQEiwAXhMxtp5v_8kzPQpkNwHl_GVYsTe4bjg4-Gz9WELQziaDVIDeQVOBriaY8BoCYT0QAvD_BwE
@Txnxvxn Ай бұрын
Thanks ❤️
@_Juls Ай бұрын
Yea i read the title dawg
@Moneygrip Ай бұрын
Hell yeah
@LuisGarcia-cq1ow Ай бұрын
sick bro, i just had a locksmith reflash my immobilizer & program a new key he made because I lost all the keys, green key light doesnt flash anymore which i think means its programmed correctly, but now it just cranks, no start no spark, you think it could be an immobilizer issue or could it just be a crank/tdc sensor or spark issue?
@Moneygrip Ай бұрын
Did it run before the spark issue? It should light up green and then shut off
@LuisGarcia-cq1ow Ай бұрын
yea green key turns on, then turns off, it ran good before the new key was programmed, it had a code for tdc no pulse but it was running with the code for a while before this happened
@Lonewander Ай бұрын
they way i wanna install this but also don't want to void my warranty
@Moneygrip Ай бұрын
I have no idea i was able to put mine back to stock if needed
@13106Hardty 2 ай бұрын
Not sure if you’re the reason but nowadays when I look up prelude adjustable upper control arms some godspeed ones pop up
@Moneygrip 2 ай бұрын
I am i have a video on it my dude
@13106Hardty 2 ай бұрын
@@Moneygrip yeah I just saw it but ig on the Godspeed website it says specifically it’s for the bb6 chasis. Just makes me think maybe you responsible for them finding that out too
@Moneygrip 2 ай бұрын
@@13106Hardty i made a petition and had 300+ people sign it and i presented it to godspeed to show there was a market and we worked on getting them made it took about a year to get done i have a video where i install set #1 and then later on i was beat on the arms with 600hp
@13106Hardty 2 ай бұрын
@@Moneygriprespect that so much for us Prelude people. Wym you beat on them at 600hp like you destroy them when running too much power?
@Moneygrip 2 ай бұрын
@@13106Hardty i didnt break them. Im just saying theyre strong and good
@DavidRoman-sx7wj 2 ай бұрын
Just got my car running last night and feels like a different car transmission loves it
@Moneygrip 2 ай бұрын
Sick
@Auz2krazyy 2 ай бұрын
Yo money grip, I got the same P06 ECU in my prelude chipped to a p28! I’m running a SST chip instead of hondata!
@Zachthaboy5761 2 ай бұрын
Yo what’s the song at 10:15
@Moneygrip 2 ай бұрын
Doing it right by daft punk
@strokingoutloudpodcast 2 ай бұрын
Hate working on German shit. It irks the piss out of me. I stick with Honda. Prelude GANG
@Moneygrip 2 ай бұрын
I used to feel the same way until i got this car. Not rusty comes apart easy, i’ll get to my prelude eventually
@strokingoutloudpodcast 2 ай бұрын
@@Moneygrip we misss youuuuuu lol I know it’s discouraging man. I’ll wait.
@_Juls 2 ай бұрын
MM MM MMMMM STARTING MY MORNING RIGHT WITH SOME MONEY GRIPPPPPP
@Moneygrip 2 ай бұрын
Rev up those friers
@Velocity0428 2 ай бұрын
Were the ports matched to the size of the new throttle body?
@Moneygrip 2 ай бұрын
Yea
@frankieolvera267 2 ай бұрын
2004 benz e320 sliver exterior and silver interior 80k miles its absolutely beautiful but everyone i know is telling me not to buy it :(((((( i want it so bad i cant decide
@Moneygrip 2 ай бұрын
Do it
@NjoyMoney 2 ай бұрын
Hello from Europe brother, thanks for this video! This fix worked for me, Couple of things tho: 1. You dont need the constant power source, only the 2 other wires are needed. But i agree a kill switch is a good idea considering the car doesnt have an immo anymore. 2. This will work with an OBD2 ECU if you combine this bypass with the bypass inside the ECU (open the OBD2 ECU, locate the small board named "immo ao" and just remove it) 3. If you want to keep your plug intact, you can use a paper clip to bridge the connector. Ps. for european brothers, the wire colors in our cars will be different than in this video, but they are plugged the same, follow the wire location on the plug, not the wire color!! Thanks bro, couldnt have done this without you!!!
@Moneygrip 2 ай бұрын
True
@NjoyMoney 2 ай бұрын
@@Moneygrip I want to clarify, i think the reason you thought you need the constant power source is because your key ignition was in the off position 👍 sick video tho bro, ive been driving all day in the spring weather thanks to you
@Moneygrip 2 ай бұрын
@@NjoyMoney nah it was just how the attempt worked out. There was no write ups or anything so i had to figure it out on my own and this was the way i did it. I was under the assumption that the immobilizer box broke constant power to the ecu so i threw a kill switch in
@NjoyMoney 2 ай бұрын
@@Moneygrip I understand, thanks bro 🙂
@Moneygrip 2 ай бұрын
@@NjoyMoney hit me up on instagram dawg trx.ron
@DavidRoman-sx7wj 2 ай бұрын
Sounds cool i have a true dual exhaust done on mine with muffler and resonator delete
@robme3660 2 ай бұрын
I installed solid shifter cable bushings. 20 min job, right? nope. Why are there so many bolts and connections to remove the freaking battery base? 50 minutes later, the results are dang good.
@Moneygrip 2 ай бұрын
These cars are kind of annoying
@zekefox2173 2 ай бұрын
Aye brother so I’m basically having the same problem that your having, but there is a viper system installed on the car could that be causing me problems also. (Lost the viper fob). Should I or do I need to completely remove the viper
@Moneygrip 2 ай бұрын
Remove the viper
@zekefox2173 2 ай бұрын
Thanks for the fast reply so I can keep this day rollin man !
@Moneygrip 2 ай бұрын
@@zekefox2173 i got you bro
@DavidRoman-sx7wj 2 ай бұрын
Just finishing my 3.5 swap in my benz from a clk didnt have to swap my motor mounts
@Moneygrip 2 ай бұрын
Hell yea
@pepinsklappedcivic8833 2 ай бұрын
So I’m having an issue with my 98 prelude I just bought it off a guy he said it’s salvage due to theft . Everything in car is completely stock ! Guy stated that only thing they took was the ecu . Car used to not crank over . I repaired few power wires I changed spark plugs and wires that got car to crank over and turn on for about 3 seconds then car shuts off I got fuel coming in . Got spark , fuel and air . I checked distributor everything was fine timing was correct ECU is getting signal and ignition switch is fine . I’m beginning to think it’s the immobilized due to theft issue and having to put another ecu in it . . Would this possibly repair the car by passing immobilizer ? This my last solution
@Moneygrip 2 ай бұрын
Is the green key light on the dash lighting up and shutting off?
@AngleFan45 2 ай бұрын
I’ve seen a lot of 01-07 c classes on fb marketplace, most of them have 200,000 plus miles on them, some have electrical issues, some have a bad motor or trans, and the ones that actually do run and drive always have some kind of problem with breaks, wheel bearings/ bushings, or missing the catalytic connectors 🤦🏾♂️😂 but I still want one for a project 😁
@Moneygrip 2 ай бұрын
Mine had a blown engine lol
@AngleFan45 2 ай бұрын
@@Moneygrip yeah I figured I watched the video if you doing the swap 😂
@asbfjswgva 2 ай бұрын
My left ear enjoyed this video
@Moneygrip 2 ай бұрын
Rip im debating messing with the audio and re-uploading
@MatthewDArcyTheLad 2 ай бұрын
🤘
@_Juls 2 ай бұрын
Minecraft music such a great touch
@NicolasMotrel 3 ай бұрын
Great video! I have a question... in my case I have a broken M272 2,5L model year 2006 and I want to swap it right into a M272 3,0L from a donor car (C Class C280 model year 2009). Do I have to on into any modification? Mountings? Accesories? Harness? ECU? In terms of computer, key, ignition map, etc. Thanks!
@Moneygrip 3 ай бұрын
Nope theyre all the same the only thing you have to do is get the ecu thats in your car now mapped for the 3.0 tune. I sent my ecu to mercedes swap shop and got it changed from a 2.5l map to a 3.5l map
@shawna7813 Ай бұрын
Or just use the ECU from a 3.0...
@Moneygrip Ай бұрын
@@shawna7813 ecu has to be binded to the car
@shawna7813 Ай бұрын
@@Moneygrip I have a W211 E350 and was told all I need to swap to a M273 V8 was the engine and the ECU from an S Class, E550, or CLS550 with the same V8. All other components are compatible. They've done write ups on the swap at the Benzworld forum...
@Moneygrip Ай бұрын
@@shawna7813 correct and you need the m273 ecu binded to your car. If youre in the US hit up mercedes swap shop
@cyanide7167 3 ай бұрын
did you get a 3.5L from a SL350 or an slk350? because those make a little over 300hp and rev to 7k rpm
@Moneygrip 3 ай бұрын
Nah i wish i got that one
@cyanide7167 3 ай бұрын
@@Moneygrip shit dude maybe you just might have to make another video lol
@Moneygrip 3 ай бұрын
@@cyanide7167 originally i was going to put a 5.5L m273 v8 but i ran out of time and options
@cyanide7167 3 ай бұрын
@@Moneygrip i was thinking the same for my 2011 GLK 350 but i dont got the time, but tbh i wish there was more mods for the m273 like i wish they upgraded the m273 with all the stuff with the sl350's m272 and have it make more power, the m273 i feel as if its capeable of like easy 500hp NA
@cyanide7167 3 ай бұрын
@@Moneygrip ya know i was thinking about actually modifying a m273, theres a spec sheet of how they made the sl350 m272 have a higher rpm, might take a look maybe i can copy paste what they did to the m272 sl varient to the m273.