Thanks for the Video! What kind of oil pan is this and where can I get it?
@SingleMaltMotors25 күн бұрын
Thank you, friend. It's a low profile oil pan, you can get one directly from Harley--or there may be aftermarket copies on Amazon
@mikeHD7425 күн бұрын
Thank you very much 🤟✌️
@عبدالطيفخضيرАй бұрын
👍👍👍👍👍
@SingleMaltMotorsАй бұрын
@@عبدالطيفخضير thank you, friend
@BmwheuisvatyajbaАй бұрын
This video helped a lot, however, the screw size is a T6 and not a T7.
@SingleMaltMotorsАй бұрын
Great
@RenZuki666Ай бұрын
What is the size of the piston and seal?
@SingleMaltMotorsАй бұрын
Here is a link to the kit I bought: www.jpcycles.com/product/drag-specialties-caliper-rebuild-piston-and-seals-kit-for-harley-softail-dyna-2008-2017?sku_id=10230779
@cynda3044Ай бұрын
I love you for this video man
@SingleMaltMotorsАй бұрын
Thank you, friend
@marksteinhauer1507Ай бұрын
Thanks alot. Just saved €1000
@SingleMaltMotorsАй бұрын
Thank you, friend
@wadeconner3200Ай бұрын
This might help those that can't seem to get the bleeding sequence to start. I don't know about other BMW models, but on my 2012 535xi, when you floor the gas pedal and THEN if you push harder you'll feel a switch being engaged. That's what I did to get mine to work. The pump is quiet and so it helps if you have someone outside under the hood listening for the pump when it comes on. Also, stay in thee car until the 10 minutes or so is up. It seemed in my case, when I opened the door to get out it MAY have canceled, but I don't know for sure.
@SingleMaltMotorsАй бұрын
Thanks for sharing that tip
@DevenCunninghamАй бұрын
Great video. Easy to follow and insane organization. Thank you for posting!!
@SingleMaltMotorsАй бұрын
Thank you, friend--and I'm glad it helped
@seninhobinАй бұрын
Thank you for the great video, but it doesn't work for me. My vehicle is bmw 520 xdrive N47D20C diesel 2.0 184 ps. I wonder why it doesn't happen?
@SingleMaltMotorsАй бұрын
Hi friend, thank you for the feedback. The N47 has a belt driven water pump, so this procedure will not work for your car. You can just follow normal process of filling up, turn heat full up, fan lowest speed, let run and top off as needed. Cheers
@joshuathompson62442 ай бұрын
What year?
@SingleMaltMotors2 ай бұрын
2014
@dawn18822 ай бұрын
Do both solenoids need replaced and are they both the same exact part?
@SingleMaltMotors2 ай бұрын
@@dawn1882 hi friend, no-you don’t need to replace both, but may as well if you can swing that. Yes they are the same part number
@alessandrodelpiero43952 ай бұрын
Hi Brother, I have noisy coolant ventilation when AC is on, As I read from internet, there are 2 reason, one of the reason is : coolant system that's filled with air pockets and hasn't been bled properly. Could you please help me how to bleed it?
@SingleMaltMotors2 ай бұрын
Hi friend, I'll be glad to help if I can--what car and engine do you have? Thanks
@alessandrodelpiero43952 ай бұрын
@@SingleMaltMotors I have f10 528i gasoline engine 2012, first time in my driver career feel that when AC is on coolant vent starts to work, vent is working very noisy of course when AC is on,some guys told me maybe air pockets in the cooling system, other guys told me check refrigerant level maybe too high, my problem is coolant vent working very noisy, also some guys told it is normal in BMW F10🤷🏻♂️, but i dislike when car working noisy
@SingleMaltMotors2 ай бұрын
@@alessandrodelpiero4395 Ok, thanks for the additional info. Let's see if we can resolve this issue. To confirm, the main symptom you want to resolve is that the AC is very noisy--is that correct? If so, can you post a short video of the AC vent noise to your channel so I can hear it?
@alessandrodelpiero43952 ай бұрын
@@SingleMaltMotors AC itself is not noisy, in this cars when AC is on, coolant ventilation starts at the same time and working very noisy. when AC is off, no noise.
@alessandrodelpiero43952 ай бұрын
Added short and video, thanks in advance🤝
@786motorsport2 ай бұрын
I saw another video they used a computer to activate the throttle this way the throttle can be open while they do the test you didn’t do that but the test came out fine.
@SingleMaltMotors2 ай бұрын
Good info, thank you friend
@raselmiyaa3 ай бұрын
Your videos are really awesome and very good quality very nice I really enjoy watching your videos. But there is a little problem with your video, you should do SEO, if you do SEO, your video views and engagement will increase, likes, comments, and subscriptions will increase gradually. If you have less idea about this, you can tell me and I will help you.
@SingleMaltMotors3 ай бұрын
Thank you
@ringofli2123 ай бұрын
I legit been looking for everything your doing online for my Aspen. Your a god send! Also subscribing
@SingleMaltMotors3 ай бұрын
@@ringofli212 that’s awesome, thank you
@ryanbarrozo52233 ай бұрын
kzbin.info3kYrRMqXS7U?si=KYwpi8rcadDPf16d
@rlman4129920013 ай бұрын
kzbin.infoCilliTn0aSA?si=XdH2YkMIiDt_AhhR
@tamimahasan52093 ай бұрын
Hello, I was analyzed your YT channel and I saw that in your channel have some problems, that's why your channel is not growing. Your videos is not reaching to targeted people, not getting engagement. Do you want to know these problems? If you can give me permission I can tell here, . Where Can I tell? here or email? I can tell anywhere if you would love to listen this. Would you love to listen? If yes, where you want to listen?
@mojo86543 ай бұрын
Thanks amigo! great video. Made changing my alternator easy!😁
@SingleMaltMotors3 ай бұрын
Thank you, friend
@Mr_Techie_243 ай бұрын
Why do we need to bleed water pump? Do we need to do once top up is done
@SingleMaltMotors3 ай бұрын
Hi friend, you will need to bleed the cooling system any time you have introduced air into the system. This procedure will work if you have an electric water pump. You should fill/refill the system, perform bleed procedure, then top up if needed. Thanks
@Brandon05STI3 ай бұрын
I have a 2014 535D but cant seem to get this to start. Any Ideas?
@SingleMaltMotors3 ай бұрын
Hi friend. Let's see if we can resolve this. Does that model have an electric water pump?
@elifaulks3 ай бұрын
Did you still have the seats you couldn’t use
@SingleMaltMotors3 ай бұрын
Yes, I do. Let me know if you're interested
@elifaulks3 ай бұрын
Yes i am
@SingleMaltMotors3 ай бұрын
@@elifaulks OK, I'm in Richmond, VA for purposes of considering shipping options if you're not local.
@elifaulks3 ай бұрын
I’m in Suffolk va
@SingleMaltMotors3 ай бұрын
@@elifaulks Very cool. Let me figure out a way to get in touch securely and we can discuss. Thanks
@Blastsbeatstilldeath3 ай бұрын
I'm glad PA doesn't do their inspection stickers like this, or I would be screwed lol Thanks for the video. I wish I had watched this before I trashed my rotator, ha ha.
@SingleMaltMotors3 ай бұрын
Thank you, friend
@codamedia3 ай бұрын
What codes did you get for this sensor failing ? I currently have #7E8 and #7E9.
@SingleMaltMotors3 ай бұрын
Sorry friend, it was a year ago. I don’t remember the codes but was chasing a rough idle.
@johnmansour79993 ай бұрын
@@SingleMaltMotorsHow do you fix the idle ?
@SingleMaltMotors3 ай бұрын
@@johnmansour7999 Mix of a few things. New belt, pulley, and tensioner. New alternator pulley. New HP and LP fuel pumps. Also new plugs and coils. Hope that helps.
@thecodfather9234 ай бұрын
This would be the same process on a F10 with the n52 right?
@SingleMaltMotors4 ай бұрын
Correct, applies for any BMW engine with an electric water pump
@thecodfather9234 ай бұрын
Thanks, doing it now whilst connected to a charger 😊@@SingleMaltMotors
@socommaster4 ай бұрын
Wait, doesnt a new handle from the dealer come with an all in one so you dont have to do surgery on it?
@SingleMaltMotors4 ай бұрын
Have you seen the part's price from the dealer? IMHO worth the minimal effort, and that's only if you want to keep the original door light.
@socommaster4 ай бұрын
@@SingleMaltMotors its around $200, i just got it changed by the dealer So if you get a new one from the dealer, it should have all that right?
@SingleMaltMotors4 ай бұрын
@@socommaster That sounds like a great deal, I've never seen it that low
@KWPS4 ай бұрын
Have a recommendation to read bmw codes? Mac & Iphone owner Thx for this video!
@SingleMaltMotors4 ай бұрын
Hi friend, thank you. Yes, a reasonable option is Foxwell NT301, which lets you read and erase codes, i.e., if you need to reset CEL. Here on Amazon for about $60: www.amazon.com/gp/product/B00UJV3E12/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
@KWPS4 ай бұрын
@@SingleMaltMotors thank you Sir!
@billkozeal58294 ай бұрын
How is it holding up?
@SingleMaltMotors4 ай бұрын
Holding up really well. I'm impressed.
@davidshannon19764 ай бұрын
It would've helped me better if you would explain what you were doing.
@SingleMaltMotors4 ай бұрын
Hi friend, ok thank you for sharing this feedback. Hope it was still helpful.
@Jorge-zu2fs4 ай бұрын
Great video. My BMW 2014 f10 e55 cranks but doesn't start. Can this be the culprit?? Appreciate your response. Are the "exhaust and intake camshaft sensors" synonyms with the "Vanos" solenoids?? please excuse my ignorance.
@SingleMaltMotors4 ай бұрын
Hi friend, sorry to hear about the crank no start. Not likely VANOS, and no--the camshaft sensors are not the same as the VANOS. Hope that helps.
@Carl_johnson_mf4 ай бұрын
Thanks nice video good job
@SingleMaltMotors4 ай бұрын
Thank you, friend
@dirkdiggler24305 ай бұрын
What color did you get? White, red or amber? Never mind, I watched the vide again and saw you got the red, thanks
@SingleMaltMotors4 ай бұрын
Hi friend, yes I went with the red. Thanks
@matt.1085 ай бұрын
According to IMPA steel alternator bolts are 19nm or 14ft lbs. also I’d recommend using a drop of blue loctite on those bolts.
@SingleMaltMotors5 ай бұрын
Awesome--thank you, friend
@ronin21885 ай бұрын
Thank you for this!
@SingleMaltMotors5 ай бұрын
Thank you, friend
@georgelujan19246 ай бұрын
Thanks just needed the toque specs 👍🏼
@SingleMaltMotors5 ай бұрын
Thank you, friend
@TootCommons6 ай бұрын
Are there only 2 solenoids per vehicle?
@SingleMaltMotors6 ай бұрын
For the 6 cylinder models. The V8 has 2 per bank.
@Александр-р7р8ц6 ай бұрын
Здравствуйте а подскажите пожалуйста где вы покупаете пирпатроны ?
@SingleMaltMotors6 ай бұрын
Я купил комплект сжатия на Amazon, надеюсь, это поможет.
@5StillFree6 ай бұрын
Oh my...Thanks you a lot!
@SingleMaltMotors6 ай бұрын
Thank you, friend
@akashicpurple32066 ай бұрын
Just purchased on 2012 with 131,000 miles. Did an oil change now I think I have a slight Valve Cover Gasket leak. Intermittent smoking
@SingleMaltMotors6 ай бұрын
Congrats, sounds like a nice car. Valve cover and oil filter housing leaks are common, but relatively easy fix. Make sure to knock out the latter as it can ruin the belt and main seal if left unattended.
@akashicpurple32066 ай бұрын
@@SingleMaltMotors DIY or should I take it to after market shop?
@SingleMaltMotors6 ай бұрын
@@akashicpurple3206 Depends on your budget and skill/comfort level. Belt and pulley are definitely DIY. Spark plugs a little harder due to access but DIY. Valve cover gasket and oil filter housing gasket harder but still DIY if you're intermediate or so.
@pignapoke67726 ай бұрын
I have a 2011 x3. I couldnt find anything that showed this setup til i found your video! A bit ridiculous that its placed facing the rear and you have to remove things to get at it but im going to give this a try and report back. When i tried this approach before i couldnt remove the piece of duct that contains the sensor. I hope that grommet is in the same place as your model.
@pignapoke67726 ай бұрын
Follow up: all went as planned. However the rough idle hasnt changed. The needle never moves - but youd almost think the rpm is 200 too low. It reads 600 as i believe it should. Slight pedal to raise to 700 and everything is smooth as butter. I cant understand why
@SingleMaltMotors6 ай бұрын
Mine idles at 600rpm once the engine settles. What symptoms are you having? I chased a rough idle for several weeks. Ended up replacing pulleys and tensioner, also alternator pulley. Also did spark plugs and coils. Rough idle resolved.
@Garrett_James6 ай бұрын
Awesome video
@SingleMaltMotors6 ай бұрын
Thank you, friend
@flynnlong10066 ай бұрын
I thought this video would help me because I was having a very similar problem. However, after ordering and replacing the drivers side door handle, I’m unfortunately still in the same situation; left without comfort access. The door handle replacement did nothing to help. Not sure why my comfort access is still not working even though it was when I first got the car.
@SingleMaltMotors6 ай бұрын
Hi friend, sorry to hear about your troubles. I'll need more info to try and help. Which handle(s) were starting to fail? Are the other handles working? Which handle(s) did you replace? Let's try to resolve this