Mine Contact Cover Is Clean…1 Button(To Lower The Light) Wont Press

My colors bridge to the net color over. Meaning yellow to light green ,etc. No white. This for my car Halos. In my house no problem when I tested it. Lol

Thank you! One of my buttons was permanently pressed, causing all the other buttons to not function. Took the cover off and wiped off the circuit board with an alcohol wipe and now it works again

Holy shit this works thank u put I didn’t have tape so what I did was just place my finger on each one

"PromoSM" 👍

Hey bud how do you re-pair a remote to the controller. I'm using it on an LED strip and some how it isn't syned with the controller.

Man what a great video. I remember building my first PC in 99 with my grandpa when I was super young, He also taught me the forbidden art of Cable Origami!

Sega Genesis can play any region Sega Mega Drive games without modifying the motherboard

THAT is a VERY GOOD question! I've been wrapping my brain around that, lol. I saw an $80, $100 and $200 Joker amiibo and a Sephiroth amiibo at $45.99! This is insane! When I got my Joker and Sephiroth amiibo, they were only $15.99! Good Lord. These prices are crazy!

Master good morning, I have a Japanese mega drive that has two slots for cartridge 😳, one in the normal place and one right in front lying forward and hidden under the housing, I can't find any other like it, have you come across this model? On the board it is defined like this MD - 1095 G -1.5 ARG02

Believe it or not I used a leftover piece of foil that envelopes the chocolate bar I ate last night. lol Thanks for the video!

I need to try this out I am praying for this to work I tried battery 🔋 as well and it wasn’t that!

legend!! thx a ton bro!! <3

Worked :)

Which shark is your favourite? Mine is Megalodon.

I found you from this video kzbin.info/www/bejne/ZqXVp5aIo8iKock

my led remote never worked. What should i do? BTW i tryed a new battery

Thanks so much!! A hole punch and some alfoil did the trick for me. My button had a white coating on the back that had worn off the power button. I tried the pencil but no luck. A little alfoil and back to working.

5 Years later this is still a problem on these remotes lol

This worked like a charm. Thanks for the video!

Ty i wouldn't have thought of that mine ended being wet under it from my kid

I had 3 of these remotes as they all stopped working. I found that if you take it apart The problem lies with the battery connectors. These remotes are made so cheaply that the two bits of metal that touch the batteries positive and negative areas are often not touching or touching more than what it should be. I kept all three remotes and and now they’re all working again. I basically took it apart completely and Sellotape it all back up without the plastic casing. I secured the battery in position with Sellotape. It doesn’t look pretty but it works and it saves you a lot of money. All these videos showing people taking it apart because of the buttons and putting it back together again is not the issue. It just so happens that when you take it apart put it back together again it only temporary works because the battery connectors are touching again. Overtime it moves and you have the same issue.

Hi, do you notice a chemical smell from that remote like nail polish? I have 2 similar remotes and they both smell like chemical.

thanks for the video

Absolute genius. I used a tiny square of tin foil and a tiny little blob of Blu Tac. One functioning power button again. I had visions of replacing the receiver unit with a new remote.

Omg I had blu tack on the on button and I was wondering why it weren't turning on. And started panicking😭😭

If your really desperate just peel off the whole thing and use an aluminium can tab and use it while pressing on the button you wanna activate. I lost the adhesive sticker with the carbon activators like a idiot and using a can tab worked fine for me

Hmm ...that fresh potato video quality :)

Me seeing this video who installed the battery up down

Mine was the battery but all i did was that i saw some little dust in it so o cleaned it and now it works

Obrigadooo Resolvii!!! Tão galera tudo que precisei fazer foi tirar o adesivo com uma pinça, igual ao vídeo, com a mesma pinça encostava onde fica o power, simulando o clique do botão e o infravermelho ligava, mas percebi que ele sempre ligava com uma luz fraca, fiz algumas vezes isso no botão power, e *pressionei a placa toda, caso a bateria estivesse mau conectada e vualá a luz infravermelha ficou forte novamente e voltou a funcionar para meu tesão total de satisfação :D Acredito que estava com mau contato com a bateria e ao pressionar a plaquinha melhorou a conexão!* Pode ser mais simples que se pensa, testa ae. Dá like para geral ver!

guys this worked! Mine broke and weren’t turning on so I watched millions of videos and this one worked! Thank you so much!❤️

it did help me a lot that you noted the screws at the VMU slot were the same as the ones holding the body together

Not exactly the same problem, but your suggestion led me to the solution. I could see that via camera that my IR constantly was sending signals without pressing any buttons. Somehow there must have been a short circuit. However taking the adhesive off, cleaning it a bit and putting back on already solved my issue. Again thanks for kicking me in the right direction. :)

My whole remote isn't working right now and it's making me feel stressful about it because it keeps changing different colors and it won't stop. It's getting so annoying, I don't know if I should change the wires or the battery

You ever gonna upload again?

WOW you saved me so much of a headache. I have a similar remote. Used an exacto blade to lift up the button panel and press all the buttons up and thats what got it working. I guess they shipped the remote with multiple buttons collapsed/shorting the remote so nothing ever happened because it was also stuck on multiple buttons. TIP make sure all the buttons are popped up like the little buttons on top of a soda from a drive through. These remotes are very cheap and with the film they are shipped with you might have smashed all the buttons thinking it couldnt be that cheap to be rendered broken that quick. That was the case for me, worked once and now i am here. Thanks !

The lights are working but the control isn’t working at all

Hi!

Mine is working when I come deep close to bulp, but it is not working when I am away from it. What should I do?

my whole remote wasnt working so i unplugged cable that connects to the light strip a little and spammed the buttons and prayed to god and somehow it fixed

miss u <3

guys i promise if it’s a remote issue and you know your lights are working you just have to keep clicking the power button over and over and eventually they will turn on

mate, its not that, i cant find any video to get the battery out cos it went to far damn in.........

I had the same problem with a similar remote. I managed to prise it apart and it was the battery contact. I cleaned it and bent it slightly and now it works perfect.

My remote works it's just that if I press the red button then a green.oight shows up but it's gotten worse when green doesn't work or show up at all

stop cussing im just trying to get my remote to work

Thank youuuu I used aluminum foil and it works nowwwww

Your video saved my rgb fan remote controller ,, I almost tore it apart luckily I saw your video literally seconds before I did so, and removed the adhesive and replaced it with another. Thanks alot man.

It worked 🙏🙏🙏