3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@fiveowaf454 2 ай бұрын
For many types of tent loops just a large fender washer on the lag bolt would work, just put the bolt through the loop of the tent. A neoprene washer of similar OD can be used to keep the metal washer in place and as a cushion between the bolt and the ring.
@Rmrfnow 3 ай бұрын
Great video, super technical. But do you know if it is possible to disable the white light(for G4 pro), the one pointing to the ground, via ssh? Thanks.
@mattjenkins8587 3 ай бұрын
This is genius!!! Thank you for this video
@Charles-lane277 6 ай бұрын
I honestly didn't think this would work,but you proved me wrong so good job.
@steinanderson9849 6 ай бұрын
coach screw $1.25 each in a pack of 25, purpose made screw in tent pegs $1.13 in a pack of 15. Think I'll just buy the screw in tent pegs!
@AM93000 7 ай бұрын
3 years later and this video is still helpful. I have the same situation where my leviton media cabinet doesnt meet my need anymore and I looked into the same tripe lite rack. Is it possible to flush mount this vertical rack?
@employee3dotcom 6 ай бұрын
Do you mean install it in the wall? No. First of all it mounts to the wall on the back. Second it's wider than 16" so it would not fit between the studs. 3rd it's over 6 inches deep. Most US walls are only 3.5-4" deep so it would still stick out. This is meant to be mounted to 16" on center stud walls with or without a Leviton-type structured media enclosure behind it.
@AM93000 6 ай бұрын
@employee3dotcom thanks. Yes i mean to install it in the wall. I did some follow up research on this cabinet and also determined that flush mount in the wall will be challenging without modifying the studs, etc
@Vladikokin 8 ай бұрын
Anyone able to enable ssh? (v3.1.16 unvr) (v2.10.10 OS) I cant seem to enable it. Help would be appreciated :)
@hide2dan 8 ай бұрын
What’s the max length of the wav?
@geros9503 9 ай бұрын
Thank you very much! Was able to use this successfully on Protect 2.8.35.
@papo1529 10 ай бұрын
Para interiores no los recomiendas ? En qué precio te salieron suenan bastante bien qué tal el bajo ?
@JAkino266 11 ай бұрын
I am unable to copy my wave file to the doorbell. I am getting this -> sh: /usr/libexec/sftp-server: not found. Please help.
@JAkino266 11 ай бұрын
@christiansakanai9812, I am going to use customize sounds for major holidays and want to revert back to the original sound on the doorbell. What is the easiest way to do this? Should I reboot or factory restore?
@lydiafonseca17 11 ай бұрын
Do I need the amp?
@bjnslc Жыл бұрын
If you're using tent stakes properly, the force to pull it straight out of the ground doesn't matter. You want to angle stakes so that they're in the ground at a right angle to the direction of force. That said, robust screws can be easier to get into and out of the ground, especially if you have an impact drill-driver. Nice DIY hook idea!
@fiveowaf454 2 ай бұрын
Agreed, I was looking at them in terms of them being easier to get into the ground with an impact gun, than a hammer in peg. But how they do when you hit the inevitable stone I always find with a tent peg, is the big question.
@madman432000 Жыл бұрын
how about just a piece of flat bar bent at 90° and a hole drilled in each end.
@channeljoe6764 Жыл бұрын
Great video. Thank you. What part of So Cal are you in?
@marcelopimenta2010 Жыл бұрын
Do you think that it was enough or you thought that was better buy Atrium 5? I am in doubt if I put atrium 4 + subwoofer or only atrium 4 but your test sound very very great
@uber2tuber Жыл бұрын
What a great video!!! Awesome and easy concept. I no longer have a vice, but think I can borrow one. very nice. Thank you! Subbed.
@timthomas9105 Жыл бұрын
My Family's biggest complaint was everything going off when we lost power. I installed an Altronix AL1012ULACM 12vdc 10 amp power supply. This gave me 6-10 12v supplies that would last between 2hrs to 48hrs depending on the load. I ran the antenna amp, still do. A Leviton router and WIFI router and a rf modulator for putting the HDMI camera out of the DVR onto the antenna amp. Now I have a 24port Cisco Switch so I installed a Leviton 42 inch expansion ring to accommodate everything.
@philipds9813 Жыл бұрын
poor neighbours ...
@Miguel-pm2mo Жыл бұрын
I shit myself when when I saw the price !!
@Reedith Жыл бұрын
can you do the same with the smart chime ?
@fasthowto Жыл бұрын
Excellent. Been looking to do this for a while. Thanks for the how-to!
@Shenal303 2 жыл бұрын
how about the bass
@jeffeubanks1072 2 жыл бұрын
A short piece of chain on the lag screw works good
@miktub1555 2 жыл бұрын
Really smart idea
@ClarkyAv 2 жыл бұрын
Protect v2.0 appears to have broken this :-(
@jasonfish4546 2 жыл бұрын
I can’t wait to get these hahahaha
@EdwardHurst2323 2 жыл бұрын
No one’s going camping with a drill
@daryledunn2071 2 жыл бұрын
I do
@stokedonphotos1 2 жыл бұрын
Maybe if you camp in a trailer that's essentially a house. Overlanders take power tools with them all the time.
@fortyoneshades Жыл бұрын
He's not using a drill.
@steinanderson9849 6 ай бұрын
I do, and a blower that reverses as a vacuum to clean out the tent at the end of the camp
@craigjoseph9374 2 жыл бұрын
Appreciate you.
@BoiseG 2 жыл бұрын
Great idea with the lag bolts. Large diameter fender washers are an easy alternative to the S hook.
@AndreViens 2 жыл бұрын
Very nice video and that works perfect for your application.
@enriquefox2230 2 жыл бұрын
Hello! I am from mexico! Excuse me, i want to buy two outdoor speakers, the sonos sound Greate but is a lot money for me… can you tell me please , what do you prefer.. a bose or a polk outdoor speakers??? From this two, can you tell what prefer? Thanks? Excuse my bad english….
@lIo15091 2 жыл бұрын
Cuál compraste siempre?
@ecu8r 2 жыл бұрын
Wow I was not aware they sold this type of rack, definetely works better to stick them on those home closets, nicely done.
@chevyrupleix 2 жыл бұрын
Is this waterproof?
@christiansakanai9812 2 жыл бұрын
Yes! Mine have held up fine with direct exposure to the elements for the past 18 months. No issues from rain, and no signs of fading/cracking from UV.
@ferdinandmunoz861 2 жыл бұрын
why not just write a batch file so we can download and run by changing IP via powershell? great video!!! Very informative... I'll defiantly be doing this for Christmas. :)
@ferdinandmunoz861 2 жыл бұрын
Can you pass off your christmas wav file. It was awesome :). thanks again for this hack.
@DrewCarrollidk 2 жыл бұрын
This was super helpful for this year's Halloween escapades. Thanks!!
@sab6300 2 жыл бұрын
For the past year+ is was just able to SSH into the doorbell, rename "/sounds/chime.wav" to "chime.wav.old", upload my custom sound with the name "chime.wav", and restart the sounds and leds process. And it worked great. But recently that process wasn't working, I am guessing due to an update. When I did these steps today the custom sound would play briefly and then the doorbell would reboot, which sucks because I wanted to have a special Halloween doorbell. After playing around with it, I notice that they now have a "sounds_ring_button" folder in the "sounds" directory that contains "Chime.wav" (big C). Sadly this folder is read only so the same rename trick isn't possible. But I did get it to work. Like in the video I altered the sounds and leds config file, but I pointed it to a wav file that doesn't exist (i.e. ""sounds_ring_button": "../../../../../var/etc/sounds/HauntedMansionDoorbell.wav") AND then I did the usual rename "/sounds/chime.wav" and restart sounds and leds process. AND ITS WORKING! My guess is that the doorbell is pointing to the new "sounds_ring_button" folder, for the config but has a fall back to the original "sounds/chime.wav" if the file is not found. Ubiquiti if you are reading this PLEASE just make this an official process thru Unifi Protect
@MarkPlones 2 жыл бұрын
It looks like this has been patched bij UBNT. Whatever I did it never uses de custom.wav. nevertheless I used your video to get access to the camera's with SSH. a comment below stated that you can just rename te file with the mv (move) command and upload a new chime.wav, this also worked for me.
@skynett81 2 жыл бұрын
i just followed the video and all does work fine for me. and i did this just days ago.
@MarkPlones 2 жыл бұрын
@@skynett81 Good to hear! We have had a few updates since oktober so maybe they changed it back
@yosemitesam9813 2 жыл бұрын
Very nice job. I think I would have used a black fan to obscure it a bit. I have a structured panel and this is exactly why I am not buying a Dream Machine Pro. Ubiquiti should rethink the coffee can DM and offer us something that is port dense and fits structured boxes.
@stupiduser6646 2 жыл бұрын
I followed your great instructions. Learned a lot. But could not get it to use custom.wav. I tried different file paths. I tried changing permissions to match the others in folder. I killed processes and even rebooted doorbell. In the end I used WINSCP to rename chime.wav to chimeold.wav and then uploaded my new file as chime.wav. Works great. I now have a great Halloween sounding ring tone using a snippet of Ghost busters theme song.
@bellyhold 2 жыл бұрын
I ran into the same issue.
@keithcroshaw 2 жыл бұрын
Well it's been a year and now I have this product. Surprised they haven't made it official to compete with Nest's holiday chimes that you have no control over when they appear and disappear. I will be doing this but my doorbell is powered by a GFCI that trips when my holiday lights get too wet... So I can see myself having to do this a couple times throughout the holidays ahead. Thanks for the video!
@therealalphamale4716 2 жыл бұрын
Just remind me to pack my drill and 18v battery pack.
@fortyoneshades Жыл бұрын
You'd be better packing your impact driver like shown in this video. Drill isn't going to cut it.
@Outdoormorefamily 2 жыл бұрын
Awesome ty
@bamhm182 2 жыл бұрын
Unfortunately, it seems like this has been patched out... Messing with this config file doesn't change the sound my doorbell makes and there are references to the various wav files within /bin/ubnt_sounds_leds binary now. I don't know whether these were always there or not... Maybe you could patch the binary, and maybe you'll get lucky and you can fit a longer name in there, but if my understanding of the problem I'm running into is correct, that just sent the difficulty of this fun little tweak through the roof.
@erikzweigle 2 жыл бұрын
Indeed, this is disappointing. The 'Chime.wav' is the only sound mine will play. It cannot play custom WAV sounds or even the alternate default loaded into the config file 'Ding-dong.wav'. This would have been a fun halloween project.
@2zum 2 жыл бұрын
@@erikzweigle I just did this today. I followed the instructions in the video like what was in the video which didn't work. So what I did instead is I just replaced "chime.wav" with my audio file with the same name. This removes the need to do any editing of files or pointing to a new file. Note the "chime.wav" is case sensitive. I replaced the one in the file /var/etc/sounds/
@erikzweigle 2 жыл бұрын
@@2zum I'm glad you got it working on your end. Unfortunately, my var/etc/sounds/chime.wav is read-only and scp will not overwrite it. I need to modify the ubnt_sounds_leds.conf file to back out of the usr/etc/sounds/sounds_ring_buttons directory because my Chime.wav is playing from that location and it is a read-only file as well. I tried your suggestion again in the var/etc/sounds/sounds_ring_button directory but run into the same read-only problem. I can only save to the var/etc/sounds/ directory using a unique name. I've tried elevating permissions with sudo to overwrite but have not had much luck. Any suggestions are welcome.
@2zum 2 жыл бұрын
@@erikzweigle Thats interesting. I know the Chime.wav in /sounds_ring_buttons was read only as well but not in the other folder. I used WinSCP instead of native SCP from say a mac so I wonder if its any different? I copied the chime.wav and Chime.wav from both locations deleted the chime.wav from var/etc/sounds/chime.wav then uploaded my chime.wav. Sounds like I just got lucky some how.
@erikzweigle 2 жыл бұрын
@@2zum Thanks for the additional hints. I was finally able to get it working with your latest suggestion. Since 'scp' could not overwrite the existing read-only file I tried 'rm' removing the original chime.wav first and then placing my new chime.wav that contained the audio file I wanted to play into var/etc/sounds and that was successful. I also went back to the ubnt_sounds_leds.conf file and replaced the "../../../../var/etc/sounds" with just "chime.wave". Just mentioning that again so that anyone else who follows this thread remembers to do it.
@texasfirefighting 2 жыл бұрын
great idea! I’ll be trying to duplicate your lag screw stake idea for my 10x14 kodiak canvas tent. tired of hammering stakes!
@gurgle9849 2 жыл бұрын
This was really good, thanks mate!
@bamhm182 2 жыл бұрын
You have convinced me to get one of these doorbells. Thanks!
@jwillette01 3 жыл бұрын
Awesome video. Thanks for explaining your audio workflow, too!
@herc. 3 жыл бұрын
Great mod thanks for sharing !!!