By chance you know where the fuses are behind the helm? How to know if they are blown
@MrPraniel3 күн бұрын
Thank you for this. I was going nuts trying to figure it out. You saved some cursed words from being released 🤙🏾
@eddeweese5716 күн бұрын
Mine sounds exactly the same, I changed the outer tie rod and that didn't do nothing maybe it is CV joint
@theamaturepro8 күн бұрын
I've done this, but you've gotta make sure you still have tongue weight or it'll wobble all over. Plenty of videos on here of trailers flipping because of it
@gerardcorreale776010 күн бұрын
god i almost lost my shit with that drivers rear seat. dealer went through every friggen option on my 23 f150 supercrew but that and where the jack was. thanks for saveing my shit brother😊
@gijsdehaan312512 күн бұрын
I hear a noise at 100mph , I'm gonna do what you say 😊😊
@wesleyrice886412 күн бұрын
Did this ever bottom out?
@Theninjas314 күн бұрын
I replaced the brakes. I replaced the disc and I’m still getting vibration after going 60 miles an hour hitting the brakes. Please help.
@victorm727420 күн бұрын
I have that same trailer. I just bring the door down on to the trailer bed and let the board hang. I've tied them together with tie down straps as if there one big beam. They don't flex at all. This way I have no fear at all that the door will come lose and come down.
@HappyLummox20 күн бұрын
Very helpful video. Thanks.
@andrewilson295721 күн бұрын
Rear seat behind driver on my 2020 Supercab does not tip forward at all when the bottom seat is lifted. Nothing happens to the seat back. I can almost see a little pin back there, but no way to get a finder onto it, space is to narrow tonget hand down that far. Plus the pin is protected by a kind of angle bracket. Tried to reach a small combo wrench back there to loop around the pin and pull up. I think if managed to snag it a couple times but given the tiny wrench I’m hanging onto I just can’t pull hard enough to spring it. Super irritating!
@dooberoso10 күн бұрын
Same here I have a 2021 seat back does not move at all like in this video. Have you figured it out yet?
@BL_Denni23 күн бұрын
This doesn't happen in my model STX base. There is existing straps that do nothing
@patmfitz24 күн бұрын
Thanks for the video - was helpful, especially the description of the speed nut and other bolts for removing the cover, and the other bolts! I managed to get the cover off completly on mine but mainly because the bolt/nut started spewing rust when I turned it. Oh well, I guess that's another problem to solve!
@19Blackskills9726 күн бұрын
Omg I've been looking all videos to finally find the same noise that's in here in this video!!!!!!! Thank you man!
@mohammedomran891527 күн бұрын
Exactly same noise in my explorer 2022 platinum but a little less, any risks if i leave it without change the CV axial ? Thanks in advance bro
@chasekowalski956727 күн бұрын
Will this also effect the tempature? My cool air doesn’t work
@P-Bizzy29 күн бұрын
Bob and Brad rotator
@cayrick29 күн бұрын
Try a chisel to locally open the crack and insert a pry bar.
@QueteimpАй бұрын
The Best Place to Hide a Car key and such a way give your car away to anyone!
@QueteimpАй бұрын
Tomas! pronounced in spanish
@LarryDickman1Ай бұрын
LOL I have done this same task with a little bigger rock. I laugh when you describe the size of the hole. Except I used that same word to describe the rock as a BFR the whole time I was splitting it into 4 chunks using 20, 3/4 wedges and feathers which only requires a depth a 'little' deeper than the length of the wedge.. I dug out one side of the hole to make a dirt ramp to drag them out.
@jessikita42017Ай бұрын
Which of these noises can you only hear every now n then? Like it’s not a constant growling sound but I hear it sometimes and only when accelerating, but not always
@jesusvillanueva2616Ай бұрын
Did you steering wheel shake since it was a bad wheel bearing
@dankoopman4616Ай бұрын
I think the bottom line is Honda put too small of a battery in this mower. Mine had 1.3 amp hours. I've been jump starting it off a 9 amp hour battery and it works great
@patrickhughes302Ай бұрын
isn't that the drain hole for the cowl missing a tube????
@KatieSweeney.Ай бұрын
Hi! I’m about to buy a used 2021 pilot EXL but the hatchback seems to be collecting water and it floods down and out when open. I’m wondering if this is a sunroof issue or if it is just designed that way like the dealer is trying to tell me?
@aliabdihaj001Ай бұрын
What was name of machine and its model wats
@LarryDickman1Ай бұрын
I use to a Bosch GBH2-28L-RT 8.5 Amp 1-1/8 in. SDS-Plus Bulldog, to drill in boulders that size.
@mrbeanbigpeanus6875Ай бұрын
This video helps me a lot. My car was making scrapping sound because of metal plate touching the rotor. Found out that the inner part of the plate was touching the rotor and it’s super hard to detect.
@ubadahalawani6702Ай бұрын
Can someone tell me how dangerous is it to drive with this issue still present?
@abevilla27Ай бұрын
Your video description is deceiving and unscrupulous. You’re a complete total moron, What’s the point of even bothering wasting everyone’s time with your stupid useless video, Clown
@swolh7406Ай бұрын
Hey, just bought my first car it’s a 03 Honda accord with 190k+ miles it has a bit of a knocking sound under the hood is there somewhere I can send you a video of the noise and you give some input? Thank you I know this video is old but it’s the only one I can find that seems relevant.
@eddiepo6924Ай бұрын
How dangerous is it to drive on the freeway like that?
@efcee4603Ай бұрын
North east people rule! Ty eddie
@tjl9585Ай бұрын
Maybe for Crew Cab but not for Extended (Super) Cab.
@LalaLand-fp5rqАй бұрын
What are the measurements of the box and the weight of the box, thank you!
@Pridecrucified2 ай бұрын
Whats the name of that plate ?
@motorpsycho22 ай бұрын
When you hit reset, what mileage does it default to before oil life reaches zero again. For instance do have drive 5,000 miles before it shows zero again? Also, can you change that to some other mileage setting, such as 6,000?
@michaelburtin34572 ай бұрын
Great video besides the pull do it slightly vibrates threw the steering wheel at high speeds
@jony56742 ай бұрын
after dropping off my son in school ( in a construction zone) . I noticed a loud scrapping sound. Like something was stuck. I checked under the car . Couldnt find a thing. Checked again. Again nothing! Than proceeded to google says maybe a brake assembly or some other problem. Decided to google more and find this video. Turns out yes a small rock was stuck! thank you!
@maggiemcdermott32522 ай бұрын
How do you unclog it?
@brightenupcc2 ай бұрын
Awesome video!!!! Thx
@fahirredzovic9622 ай бұрын
On my Golf Mk7 there is a knock on small bumps, on uneven roads, on speed bumps. It is heard only at low speeds of 5-22 km/h, after that it is almost inaudible. I hear the same sound when I start the engine, there is a knock-clunk, the same sound as when I drive on uneven roads, on speed bumps... I noticed that when I move the half shaft left and right, there is a knock in the cv axle, just like in your video, where are you explained that it can also be heard on speed bumps. I went to 3 service centers and they all say that the suspension is ok. Do you know what could be the problem?
@MultiSskill2 ай бұрын
It just happened to me, why is this happening? my axle crossheads were new
@sanjeevjoshi47882 ай бұрын
Thanks. I have such noise after changing break pads, disc and caliber. IF shield could be an issue like you explained then why it comes randomly only for some time then stops ( Eg if I drive it starts after 5-10 km then for 2 mins only and then stops). If it is bent shield then it should be continuous, right ?
@sanjeevjoshi47882 ай бұрын
Thanks. I have such noise after changing break pads, disc and caliber. IF shield could be an issue like you explained then why it comes randomly only for some time then stops ( Eg if I drive it starts after 5-10 km then for 2 mins only and then stops). If it is bent shield then it should be continuous, right ?
@EddieCarrara12 ай бұрын
Brakes get very hot so the metal expands and contracts a lot. It’s possible it just needs a slight adjustment.
@tacohiker2 ай бұрын
I never had this noise until today when the mechanic changed rear pads and rotors. Horrible scraping noise. We pulled it all out and inspected and found no signs of the backing plate scraping at all. But found the pad and rotors are already grooved deeply and its only been a few miles. The noise is worse during a turn and its still made when the tire turns and the brakes NOT being depressed. Almost like the wheel is doing it and not the rotors/backing plate.
@WhirlOmar2 ай бұрын
I almost clicked away because that sound effects had at the beginning. I thought was a sound they were going to be talking about and that’s not the way my car sounds.
@rjking46582 ай бұрын
Hi I have 2014 Honda accord 2.4 liter front wheel drive It has the same noise What could be the problem? Please help thank u
@colinsmall81702 ай бұрын
In U.K. Fit/Jazz same,so is Mk 6 Fiesta.I used spray aerosol house gutter joint leak stop,two coats,sorted.
@EddieCarrara12 ай бұрын
So all fixed?
@tikochavsd2 ай бұрын
Men but second seat how folde??
@sherryballestero51082 ай бұрын
I have squealing and scraping noise while driving forward. Just had brakes changed two weeks ago with new caliper.
@EddieCarrara12 ай бұрын
Most likely when they did your brakes, they bent the backing plate and it’s too close to the rotor, causing a scraping or squealing noise. Find out which wheel it’s going from and make an adjustment on the plate behind the rotor. You can use a long screwdriver and push on it just to move it away from the rotor a little, it doesn’t take much force to move this plate.