So this is what Jugen Klopp does after retirement from Liverpool
@dansstudioworkshop28 күн бұрын
Fuck I was told to move the steps from on her flowers, Yep another sting on the ankle....YES my fault
@dansstudioworkshop28 күн бұрын
Too funny
@dansstudioworkshopАй бұрын
Also working at The Guitar Repair Shack in Calgary Alberta Canada
@marygauthier8397Ай бұрын
Looking good
@dansstudioworkshop21 күн бұрын
Thanks 👍
@dansstudioworkshopАй бұрын
I forgot, It's one year of Dan's Studio and Workshop. So cool
@scottdahlberg48902 ай бұрын
Why the animal sounds????
@dansstudioworkshop2 ай бұрын
Just how I felt at the time, no rhyme or reason
@scottdahlberg48902 ай бұрын
@@dansstudioworkshop What do you know of fret board fall off. I need to learn this for my own repairs at home.
@dansstudioworkshop2 ай бұрын
KZbin Dan at stewmac he is the guy for guitar repairs tutorials. Cheers
@canadiansteve50392 ай бұрын
Not really Epiphone's fault that P90's don't fit in a guitar designed for humbuckers.
@dansstudioworkshop2 ай бұрын
Did I say it was Epiphone's fault, no LOL
@jmakc35412 ай бұрын
The tonerider rebel 90s are pretty good humbucker-sized p90s for the money. Only come in nickel finish, though.
@dansstudioworkshop2 ай бұрын
That's interesting thanks for the info
@Nothing-gv8mv2 ай бұрын
Guitars are so stupid 😂 sometimes it's a fight to get it right 👍
@dansstudioworkshop2 ай бұрын
My just having fun
@anthonypanneton9232 ай бұрын
Nothing ever "just fits right in." Especially with a Gibson or Epiphone. But it looks like it might make a nice guitar - one of these days... I have two '60s vintage Gibson SGs - they've never been easy to live with. But I will say - both have P90s, and I wouldn't have it any other way. Both left the factory with P90s, but one (a Junior) had been modified by the time I got it, and had a humbucker in it. I used it like that for a long time, but finally had to put a P90 back in. My retrofit is not cosmetically pretty to the trained eye (or any eye that takes a careful look), but it sounds so much better now - to my ears, anyway. So my $0.02 worth ==> it might not be cosmetically perfect, but it will sound better with P90s. My other recommendation would be to use 250K pots with the P90s. But hey, what do I know?
@scottdahlberg48902 ай бұрын
Cant wait to see more, she is really pretty. Just needs lots of TLC and Love and she will pole dance again.
@dansstudioworkshop2 ай бұрын
Thanks Scott
@scottdahlberg48902 ай бұрын
@@dansstudioworkshop no problem. I love your work.
@dansstudioworkshop2 ай бұрын
@@scottdahlberg4890 thanks Scott more to come, sea foam green Strat next week. and can't wait to complete this SG
@dansstudioworkshop2 ай бұрын
I can make a hanger for you'z
@dansstudioworkshop2 ай бұрын
For Sale
@selby162 ай бұрын
just got this guitar the sound is great the neck is great the trem arm fixing is crap , a strat is much better for me
@dansstudioworkshop2 ай бұрын
mmmm the fixing of the term arm, Is it the right term arm? cause this one fit great.
@lucanuneztv3 ай бұрын
Hey Dan! Looking forward to see Molly here featured on your channel 😀
@christopheraaron82993 ай бұрын
My brother just gave me an old 1971 Balladeer that needs a lot of work (he knows I like a project.)
@lucanuneztv3 ай бұрын
Nice setup, Dan. Thanks for sharing!
@TheUlesifah823 ай бұрын
Dan , you’re my new favorite Utube guitar dude !! Kinda remind me of my other favorite Dave’s World of fun stuff !!! Good humored straight up old school stud !!! Love it !!! 😎
@dansstudioworkshop3 ай бұрын
Wow thanks Brad, I also watch Dave's World of fun Stuff. Like I say I'm not all here but I'm here all the time. And I love doing this. Cheers
@dansstudioworkshop3 ай бұрын
Wow the happiest in life I've been it when I'm playing music
@4Sandrix3 ай бұрын
It's called Tarist not Marist
@dansstudioworkshop3 ай бұрын
Lol My fingers, Thanks
@4Sandrix3 ай бұрын
@@dansstudioworkshop happens to all of us <3
@dansstudioworkshop3 ай бұрын
There's a lot of parts that are not original on this guitar
@dansstudioworkshop3 ай бұрын
The back ground music is my creation
@hilariovallesilva13802 ай бұрын
Buena música.
@dansstudioworkshop3 ай бұрын
Sold
@dansstudioworkshop3 ай бұрын
I'm not a good guitar player, LOL
@dansstudioworkshop3 ай бұрын
Loving this Guitar
@dansstudioworkshop3 ай бұрын
My Hip's were so bad I speed up video. Two new hips as of May 2024 and I should be able to a few month to start playing again. Cheers
@dansstudioworkshop3 ай бұрын
I need to check out the glitter sticks ones soon
@user-tz7lq9ei8y3 ай бұрын
hi unkle dan
@dansstudioworkshop3 ай бұрын
Great to see your liking my vid's hope to see you this year. I'm not all here but I'm here all the time. Cheers
@simonrass29614 ай бұрын
Hi, why did you disassemble the whole bass? I think the fret job and polsih could have been done with the neck on. I would even leave the bridge. I have the same bass and the toggle switch made problems, so i reconnected it
@dansstudioworkshop4 ай бұрын
Neck needed to be shimmed.
@Vaari805 ай бұрын
414 is made in Indonesia for what i know. Its written in the label backside of the body behing bridge. I have the red burst coloured one. Like it a lot. Though that orange colour would be more awesome.
@dansstudioworkshop5 ай бұрын
Yah loving the Orange
@Playsinvain5 ай бұрын
I see the shim in my Ovation and just tried to extract it, but it seemed like one side was connected by a small wire? I felt I’d have to force it out, or snap something. Any words of encouragement?
@dansstudioworkshop5 ай бұрын
The one solder to a wire is a pickup.
@Playsinvain5 ай бұрын
@@dansstudioworkshop thanks. Do not remove!
@dansstudioworkshop3 ай бұрын
Yes do not remove
@kerry00995 ай бұрын
Stress test? You need to be stressed first. I havent seen that in a few yrs....😎
@khillsy44895 ай бұрын
Where you at, big guy?
@dansstudioworkshop5 ай бұрын
Calgary Alberta Canada
@dansstudioworkshop5 ай бұрын
loving the modded Star Caster
@dansstudioworkshop5 ай бұрын
Thanks to the guitar geek.
@dansstudioworkshop6 ай бұрын
everything is smaller then you think.
@handsfree10006 ай бұрын
😂 I was not expecting that 🤣
@dansstudioworkshop5 ай бұрын
Haha having fun
@user-dk2pl4hl9n6 ай бұрын
I like eggs
@dansstudioworkshop6 ай бұрын
Nice LOL
@dansstudioworkshop6 ай бұрын
Too much fun LOL
@marygauthier83976 ай бұрын
Dan, nice job with the violin, it was interesting 😊
@dansstudioworkshop6 ай бұрын
Thanks! 😃
@marygauthier83976 ай бұрын
Interesting
@Markleford7 ай бұрын
Ah, yes, the single-action truss rod, the speed bump in my own Starcaster project! I picked up mine from a Goodwill where it was sitting with no strings on it. I eyeballed down the neck to see if there was any twist, which checked out fine, and the relief seemed ALMOST flat to me. I figured, "Even if there's a little backbow, the truss rod will help correct it..." And of course it turns out it's a single-action truss, so there was no help to be had there! To make things worse, not only was it kept without string tension for so long, but also the truss rod was still engaged to help it stay in a slight backbow! Given the girthy dimensions of the neck, my eventual solution was to put heavier gauge strings on, tune it UP +4 semitones ("G# Standard" tuning?) for extra tension, and leave it on top of the cabinet in the bathroom for a month where it could soak up all that lovely steam. Eventually it got the board to at least a flat plane unstrung such that a set of 9's was enough tension to keep a slight bow in it. Plays well, currently! The fret job from the factory was actually pretty good.
@dansstudioworkshop7 ай бұрын
Yes the dreaded STAR-caster, My is working good with 11 on it.
@dansstudioworkshop5 ай бұрын
I'm liking the Star-caster.
@Markleford5 ай бұрын
@@dansstudioworkshop Haha, cool! I put a cheap Amazon pickguard with dual rails on mine to play with some new sounds, with coil split switches and a 7-way mod. Loving the 15" radius fingerboard!
@dansstudioworkshop3 ай бұрын
I have the Mexican pickguard and sounds great cause I rewired it
@Markleford7 ай бұрын
Haha, currently working on a Starcaster myself, so I know the surprises they bring! Mine has a maple fingerboard, but it's a cap -- there's no skunk stripe on the back! Apparently they'd made them with whatever extra parts they had around the factory floor at any given time, so specs would vary wildly between runs.
@dansstudioworkshop7 ай бұрын
I bet, not a good guitar but a great guitar to work on what not to buy.
@paulauksztulewicz48037 ай бұрын
Very cool! Now what if there are no shims and still too high at 16th fret? Ideal at the nut. USA made standard Balladeer shallow bowl with standard sound hole.
@dansstudioworkshop7 ай бұрын
sand the bridge...
@Ro-Bucks7 ай бұрын
I got the arrow head starcaster neck but I stuck it on some cheap fake fender body and it didn't fit that well, I wonder if I can buy any star caster if it will fit right.
@dansstudioworkshop7 ай бұрын
Maybe
@bennettmichaels43097 ай бұрын
Checking "fret BUSS ?"
@dansstudioworkshop7 ай бұрын
more video's on this STAR-caster, one problem after another. LOL
@dansstudioworkshop7 ай бұрын
I turned it into a hardtail
@dansstudioworkshop8 ай бұрын
I guess I don't know the whole story behind this guitar, Told one thing then another, so how knows. Plays nice an the end