I appreciate this video

That is a gypsy or Mexican way to paint the wheels. Take off the wheels at least!

The best fix for the 4l80e is replace with a turbo 400, job a distributior in your engine and toss on intake, carb, and ride trouble free.

I've Bought many items with the Summit brand from them, always been very satisfied. Dart makes the 165 cc head, although it's actually a 170 cc Dart head with the Summit logo. And the Summit flat tappet lifters, made on Mexico,are having no problems with reliability.

THATS your video… THATS your ‘diy instructional video’? ….wrap a string around the car, and if something isn’t meshing good, adjust some things that you can get to adjust. I think a good side note would be a disclaimer stating: do this process everyday until your car and tires are wearing properly, or worn out. I can see a whole series of DIY maintenance videos! *How to change your own oil. Somewhere on the bottom of your car is a ‘plug’. Find it-remove if- change your oil. * How to fix you stuck window. Before you begin, determine if it’s stuck ‘up’ or ‘down’. If it’s in the ‘up’ position: adjust all remaining movable windows to the ‘up’ position. If it’s in the ‘down’ position: adjust the other down. Problem solved. And my favorite: fix that electrical short ! Cars come with too much wire- somethings obviously gonna short out after a while. Remove wires one at a time from the easiest access point until the short is eradicated.

Is the 6.0 in a 2006 3500 express cargo van 3d the same as the one you got

Thank you so much!!!!

Bros the goat I have a transfer case code for the oil change and I’m scared ima break it I need to change it asap

Still doesn't show how to adjust it if it's out

Having issues with mine not shifting into od. No sigh of any issues just stopped shifting into od. I can feel it trying to though. Was thibking my lock up cylanoid may be bad?

Pan bolts are 18 lb-ft

Should have removed the chrome ring

which one is solenoid a&b

Do you have to cut the cam signal tooth for cam sync position angle?

Oh! He first time customer. 😂😅😊

That was so much worse after 🤣🤣🤣🤣🤣🤣 props for staying positive

Could you clean pistons instead of getting new ones

why do we keep hearing gun shots?

Are there any disadvantages to not installing the cover you took off ?

I hate wiring but I’m glad I found your video here! Thanks a ton!

I have a 2001 silveradoo the hole where the transmission line screws n at the top is striped out do thoses can be taken out and replaced

Man you made it work, that’s all that matters, you didn’t pay someone else to do it, you did fine, a lot of folks caint even do what you done, just keep at it, you are working with what you got and making it work, 👍🏻

Why are you rebuilding the motor they usually unless someone ran it with no oil or something the bearings are usually in pristine condition even on a 200 thousand mile junkyard motor the cylinders have the cross hatch still and i understand that the best thing to do is not touch the bottom end at all when you do its not as good as the robots at gm did it for some reason they just torque all the bolts in the right sequence and the right numbers that they last basically forever if it has good oil pressure its a decent amount of money that could be saved w out touching it and if its not broke why fix it right go with this acronym KISS keep it simple stupid .. put that bottom end money towards a cam and timing set and a set of valve springs and from what ive been told thats all thats needed of course headers and whatever else your gonna do but send it just like it is and it will last a very long time posibly even longer than the one someone has been in the bottom end on idk why either.. you would think new bearings would make it better but the one w some miles on it has been broken in and is just loose enough to be rode hard and put away wet and live. A long life lol

This was incredibly helpful got this doggown 87 S10 Blazer a couple weeks back 2.8 been struggling with the healights turn signals and parking lamps theyd all turn on with varying success but I'd blow bulbs and such

My 2002 Chevy 3500 lb7 won’t shift either. I’m praying this is all it is.

- where’s the CRZ!? How’s she doing!?

French fies should go or atleast both them should have them

i got some flashark headers. fit great except one very important detail...they dont clear the brake lines on the passenger side. i rerouted my brake,fuel lines and the parking brake. this is with zero body lift. i took a hammer and beat the firewall in lmao. all this to POSSIBLY have a rear turbo setup

Do I have to take the whole headlight out?

I love GM quality! It’s my bread and butter for my high lifestyle! Raking in the money like crazy with the newer stuff. Damb, I’m going to be a billionaire when I retire in 8 years!

What brand control arm did you use?

Binging this build lol doing a dawned good job can't wait to do mine though ima try and keep ac cruise and all the factory functions

Looks good Thx!

Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless you all in Jesus name

Do shave ur exhaust cam trigger?

Thank you! You just saved us time and money!

I have a 93 Silverado and same problem here it would move go in reverse and forwards but the rpm would just go up. The speedometer would not move at all and the truck won’t shift into gear.

Never got back to it😢life got in the way

If you know how to work a welder, why would you spend 300 on a transmission crossmember..why not just make one

I'd rather not cut the frame...but I'm using a 92 s10 blazer 4x4 but I'm not keeping the front diff for now so that will give me a lot of room..when I go back to 4x4 I'll be solid axle swapping it

Can you post the link for the 3 piece headers I need them asap

thats the nice thing its DIY nobody knows that or cares and it looks better than original - less mess/$$$!!

Bmw sounds like a ricer lol

What’s the part number

Thank you I been having no fuel cutoff occur either in my truck and its not taking. My only theory so far is that since it wants WOT maybe I didn't floor it

Hi I'm going to do a swap in my 1986 S-10 just wondering if this trans clears the floor without mods?

Did you have to use the scan tool in the beginning before draining? I have an X7 and understand the tool opens up a closed compartment to get all the oil out.

Good video buddy

I painted my rims used primer first then paint but they feel a little rough not smooth. Any idea why or what can i do to smooth them out?

I went to video through video on KZbin, and this person made my night because I was trying to get this piece out, and no one mentioned it about taking the bracket out to make the stuck axle out. Thank you so much