Thank you, I'm glad you found it useful! 😊

Greetings! And thank you! 😊

Thank you!

Thank you!! 😊 I'm glad it helped you, and I hope it continues to help people. And I appreciate you sharing the video! I hope you have a wonderful and Happy Holidays, 🎄 and happy trucking! 🚛

In the Moza Pithouse software, go to the wheel options. Then on the right you should see the option for "Engine RPM Indicator Switch Mode." Turn that to "RPM Indicator" and it should work. Hope that helps!

@@DarkWater1123 thanks think my wheel maybe faulty

That's not good! Make sure you have the latest firmware update. If you're able to get it working, you'll most likey need to adjust the % of rpm per rpm light, as the rpms go much lower in ATS & ETS2. If the issue still persists, contact support for the place you purchased it from and explain your issue. They should be good at helping you out! I had a faulty wheel, and both Moza and the dealer I bought the wheel from really helped me out on getting a replacement.

You could also set it up to be the wipers if you wanted as well, you would need to bind the following: config_lines[375]: "mix wipers0 `semantical.wipers0?0`" config_lines[376]: "mix wipers1 `semantical.wipers1?0`" config_lines[377]: "mix wipers2 `semantical.wipers2?0`" config_lines[378]: "mix wipers3 `semantical.wipers3?0`" config_lines[379]: "mix wipers4 `semantical.wipers4?0`"

Thank you for this!! I really appreciate you telling me. I'm going to try to get it to work tonight!

@TheRogue576 I played around in the controls config file, and your suggestion is truly game changing! I also found configs for the cancelation of the turn signals as well as for each level of lights, off, park, and on. config_lines[392]: "mix lblinkerh `semantical.lblinkerh?0`" config_lines[394]: "mix rblinkerh `semantical.rblinkerh?0`" config_lines[387]: "mix lightoff `semantical.lightoff?0`" config_lines[388]: "mix lightpark `semantical.lightpark?0`" config_lines[389]: "mix lighton `semantical.lighton?0`" I tested all of them, and they work flawlessly! That, with the wipers and retarder lines you suggested, the multi-function stalk is issue-free! Thank you so much for telling me about this! I really appreciate it!

@DarkWater1123 Were you able to get the hold buttons working? I suggested the same thing to somebody else but they said it just turns off straight away after you indicate.

I just tested that one again, and I got the button mixed up the first time, so no, unfortunately it doesn't work the way it should. 😕 it was just canceling the turn signal for the brief hold. So that's my bad. If SCS were to enable a turn signal cancel config, that would solve the issue. I just reverted back to using the Moza ETS2/ATS setting just for the turn signals. I kept the wipers, retarder, and lights configured separately, and they function perfectly.

I don't understand your question. If you're wondering what website i bought the whole setup from, It was a mix between simmotion.com and mozaracing.com

Sure thing. The issue is had with the wheel was that anytime I pressed "up" on the left thumbstick, the right thumbstick would activate to go left without being pressed. It would continue to go left, even without me touching the wheel until I pressed the right thumbstick to go a different direction or pressed "down" on the left thumbstick. I first discovered it when I was trying to map camera views/controls to the right thumbstick while the left one for the look up/down/left/right. It became very obvious when I tried using the wheel in Farming Simulator when I tried using the thumbsticks for walking & looking around like a regular controler. In FS, any time I would move forward with the left stick, the camera would spin uncontrollably to the left. I reached out to Moza for help, they helped me troubleshoot it, but ultimately needed repair or replacement due to a faulty motherboard. From what I gathered with my issue with the wheel, it seems pretty rare for that ti happen. And the support team at SimMotion (where I bought it from) worked with Moza and helped me get a replacement wheel. Honestly, it was the best customer service I've ever had.

@@DarkWater1123 Thank you for explaining, sounds like a really rare issue. Good to hear Moza's customer service is top, just like their products.

It depends on where you purchased it from and where you live. I purchased the TSW, shifter, and pedals from SimMotion.com because it was easier and faster to ship with me being in the U.S. and it shipped within a week of my order. I ordered rhe R5 bundle from Moza, and that one took a couple weeks to ship. And I ordered the turn signal stocks from Moza directly over a month ago, it it just now shipped, but I think they were on pre-order for a while yet. I would reach out to whichever vender you ordered yours through and request a status update. Most vendors are usually pretty good about giving you an update.

I see your point and don't blame you one bit for requesting that. I don't own the HORI Truck Control System, but I have a friend that does. I can see if he'd be open to the idea of letting me do a comparison video of it vs. the Moza Truck Sim Wheel. I can't promise it, but I will try.

Pay for tge Moza lol. The hori is a bad design overall. The analog sticks will get bumped when youre turning cause theyre so tall, the buttons are not backlit, the buttons on the shifter are in a bad location. You either have to reach around the shifter or angle your hand weirdly to hit the bottom buttons. Just isnt worth the money. Pay the $550 or whateber for the truck bundle from moza and than add a shifter and clutch pedal if you want for a couple hundred more. Makes more sense.

That's awesome! Thank you!! 😀 I remember watching that stream. I'm glad you were able to win and get the game! I have over 1000 hours in the game and have had many different profiles. It truly is one of my most favorite games to play, and thank you for subscribing! Before the TSW came out, I was looking at the Logitech DD. How is it? I think the TSW should work with the adapter, but I wouldn't know for sure. However, the wheel is kind of heavy, so the force feedback could be a little weak. Even with the R5, it's a little light at some points, but I compensate that by turning up the settings in-game. So far I haven't had any issues since doing that.

@ I hope to also hit 1000 hrs in ATS someday. The Logitech wheel is great so far. It’s too bad they took a while to come out with more accessories, everything is built to last and easy to setup. I just bought the round wheel and the shifter / handbrake. The Round wheel is really nice but still a little small for trucking. Thanks for letting me know that the TSW wheel is a little heavy. I’m still trying to figure out how to set up my rig for both trucking and switching to other racing games.

Being able to switch out the wheel via quick release is a huge plus. As for the weight of the TSW, though, if you have the 11Nm DD wheel, that should be plenty to handle the weight of the TSW. I only have 5Nm, which is where it becomes just slightly too weak. I think the recommended amount is about 9-12Nm, but it can work woth lower. So if you'd be able to get the adapter to fit and work your logitech, you shouldn't have any issues if you chose to go with it.

I played the demo for House Flipper 2 and absolutely loved it. I just bought the full game recently and can't wait to start it up!

I'm glad to hear that! Thank you! 🙂 I've been itching to get back into building in Fallout and try to expirement with different styles. I hope you continue to get more inspiration for building! Let me know how it turns out!

¡Gracias por ver el vídeo y por tus comentarios! Acabo de añadir los enlaces a todos los productos que utilizo para Sim Trucking. El coste puede ser un poco elevado, pero hay opciones más económicas disponibles, si lo deseas. Me llevó mucho tiempo ahorrar para estos y valió la pena la espera. A continuación, se incluyen los enlaces. Volante Moza Racing TSW Trucking: us.sim-motion.com/products/moza-racing-tsw-truck-steering-wheel?_pos=29&_sid=67f1f743c&_ss=r Pedales Moza Racing CRP: us.sim-motion.com/products/moza-racing-crp-pedals?_pos=20&_sid=67f1f743c&_ss=r Palanca de cambios Moza Racing HGP: us.sim-motion.com/products/moza-racing-hgp-shifter?_pos=2&_sid=67f1f743c&_ss=r Paquete Moza R5: us.sim-motion.com/products/moza-racing-r5-sim-racing-bundle?_pos=1&_sid=5f50ba215&_ss=r (O) Paquete Moza R9 (versión más reciente): us.sim-motion.com/products/moza-racing-r9-sim-racing-bundle?_pos=12&_sid=67f1f743c&_ss=r Caja de botones Patriot XL de ATS Accessories: www.atsaccessories.com/product-page/patriot-xl-box Pomo de cambios personalizado de ATS Accessories: www.atsaccessories.com/product-page/custom-style-shifter-pre-order Soporte para volante Next Level Racing 2.0: www.bestbuy.com/site/next-level-racing-wheel-stand-2-0-black/6515268.p?skuId=6515268&ref=212&loc=20510845600&gad_source=1&gclid=CjwKCAiAxKy5BhBbEiwAYiW---6SdjAJ5EMKqDyzHT3mwCs9ZYjmPZuy-9QCGljTcTasXOt8cAjCrxoCjBEQAvD_BwE&gclsrc=aw.ds

You're welcome! More building videos are soon to come!

Thank you! I appreciate you! 🙏

Yuh

Thank you! 😊

Yeah... I've taken a long hiatus from building in Fallout. BUT, I am slowly working my way back. I plan on doing another Fallout build soon, in the next week or so if everything goes according to plans.

Thank you! 😊

?

?

?

Thank you for the feedback! I apologize for how rough it is. I think I know where I went wrong with it, and will do another rebuild of it again, this time trying to be more detailed. If ou don't mind, could you help me and let me know what details I should include when I redo the build?

@DarkWater1123 Step by step would be great if it's a build video. At basic level, at least tell people the exact number foundation tiles across and number walls, ect. Or it can't be followed. If I remember correctly, the last video showed specific steps/trick to get some of the roof pieces to snap and how to get the foundation lowered over that annoying dirt patch in the front. Lol.

Sorry for the late reply, YT is bad with letting me know when a reply is sent. Thank you for the tip! I was just about to record the building process again, and I will definitely use your advice on the structure of it.

I'm glad you enjoyed it! 😊

Thank you!

Thank you! It takes a lot of effort to do, but I'm happy with how it turns out

Wait until the next video when it's all finished!

Thanks

I had that mod installed before the next gen update, but since then I haven't been able to get it to work properly. And, yeah, it was a bit rough. The recording ended up being a couple hours long, so I tried shortening it up to about an hour for viewing sake. My building process is kind of all over the place, and as I build I come up with different ideas to do and end up backtracking A LOT. But thank you for the feedback! I'm going to look into that mod again, and see if there have been any recent updates. And for my next build video, I'll try to edit it better!

@@DarkWater1123 Thank you for the build I actually really do love it, but the Editing made me insane having to keep tracking back and see what changes you made! XD Also you can downgrade FO4 to 1.10.163 using Simple Fallout Downgrader, but it is probably unsafe unless if you start a new save, not sure! Best of luck on future videos! :)

Thank you! And i appreciate your feedback

@Demun1649 What would that one game be?

@@DarkWater1123 First, are you leaping to the defence of the game you featured?

@Demun1649 Medal of Honor isn't my all time favorite. But I did enjoy playing and recording the game and the story behind it. But everyone is entitled to their own opinion. My all time favorite game to play is Fallout New Vegas & Fallout 4, which I also showcase here on the channel, along with some other games I enjoy. 🎮 🙂 So, with that out of the way, what would be your one game that is worth playing? 🤔

@@DarkWater1123 You don't sound old enough to have ever heard of the best strategy game ever written. So, you've clearly never played it. Play online against 7 other players, or against 7 on the PC.I've taken to non-stop 24 hours, and won it many times. I have it on all the time. So, search for an 8-player strategy game, now open source. You'll, sadly, try it, find it satisfies more than any of the FPS games, and become addicted.

I appreciate the suggestion and the best of luck to you! However, don't want to be a driver IRL. My father, my uncle, and my in-law all used to be truckers, and I enjoy trucking virtually, but I don't want to do it as a full-time job. Maybe if my current career path doesn't work out, I'd consider it.

Fake movies take a lot to edit to get "just right" LOL Thanks for watching!

I had to trim it down due to a copyright song being in it. I can re-upload the original as an unlisted video and give you the link to it if you'd like. Otherwise, I'm planning on doing a rebuild video of this one, and a couple others that are on my channel in the next couple weeks

@DarkWater1123 don't worry about it. But thanks for offer. I've built it so many times I think I can do it from the picture alone. I am going to try it tomorrow.

Let me know how it turns out!

@FunAfter52 I just posted a new video, rebuilding this fully and going over every part of the build process, except for the decoration. Here's the link: kzbin.info/www/bejne/i4uQlXp4aLdqp9E

@@DarkWater1123 Thank you so much! That is mighty nice of you! I just redid my mods. I'm going to do a Horizon play through, but still planning on building like I always do lol.

I use a full sim setup with a Moza R5 and the TSW wheel and an ATS Accessories button box

​@@DarkWater1123Then get a webcam/DSLR so we can see your setup while you drive, that wheel is pretty awesome and it's a waste not to show it to your audience 😖

Thanks for the suggestion! I am looking at getting a wheel cam soon, just not quite sure when I'd be able to

I do. I can post it separately, if you'd like. I had to go into all of my old videos and remove the copyrighted songs I used back then, which is why it is just the finished tour now.

​@DarkWater1123 oh gotcha. You don't have to worry about it man. I literally just finished doing your build. It took me hours and some part was confusing. Alot of pausing and back and forth but I copied it exactly how your build is. This is amazing bro.

I wanted to let you know that I'm working on a rebuild of this one, and a couple other builds I did previously that's more in depth on how I built it. The video should be coming out within the next couple weeks.

@DarkWater1123 Oh hells yea bro. Can't wait to see it. By the way, I made the exact replica of your built just by watching the short tour vid. Is amazing bro.

@ElluzhinYT I just posted a new video, rebuilding this fully and going over every part of the build process, except for the decoration. Here's the link for you to check out: kzbin.info/www/bejne/i4uQlXp4aLdqp9E

I really enjoyed building it! It's available on the Creation Club. With my restart of Fallout 4 (you can watch the progress on my Let's Play series) I want to find different ways to incorporate donut shops in them. If you have any suggestions or things you'd like to see me do, let me know!

Thanks!

Hey, thanks! I'm glad you like it

You know what, your absolutely right. I think out of all the times I've played Fallout 4, I only did it once... :( Poor Codsworth.

Thank you! I appreciate that! 😊 Thank you for your feedback, and I agree, the walking parts do get a bit boring 🫤. My next couple videos of this series should be a bit better with that.

Thanks! :D It was a blast to play!

Thanks! :D

Thanks! 🫠

They are mini DLC packs available for purchase in the Creation Club, available on all platforms!

👍

Lol