6 ай бұрын
7 ай бұрын
8 ай бұрын
10 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@dannyboy4893 3 күн бұрын
Hi I got these lights but the problem I have is the reverse lights stay on when i brake how can i remedy that i love these lights i have a 2015 highlander
@squeakycleanair 3 күн бұрын
These lights were purchased from @urc_light_hub in Canada. If you have issues and yours were purchased from them please contact them for assistance.
@dopeyiniraq 11 күн бұрын
What tool would recommend for a good bender
@squeakycleanair 11 күн бұрын
@@dopeyiniraq high quality benders. Ridgid, swaglok don't cheap out because those are weighted for smooth curves
@imranksb 23 күн бұрын
Hi, thanks for the video i have problem with the condensor as well which needs to be changed. I own lexus gs450h 2008 year model. Do you think the procedure will be the same?
@squeakycleanair 23 күн бұрын
I think so.
@213SAPPER Ай бұрын
Nice GS. Got to check out VIPGT 1 of 1
@PatC1 Ай бұрын
Shouldn't you run a recirculating valve vs a BOV due to MAF is downstream?
@BJW3Run Ай бұрын
my rear shock from airlift came fully wound in. my wheels scrapes the car... I have to take it back out and length it. Thank you!
@squeakycleanair Ай бұрын
Ohh man. It shouldn't as they come new pre adjusted from airlift to be put in. New or used?
@BJW3Run Ай бұрын
@@squeakycleanair it was new. To be fair I am on 20” wheels and not the stock 19” wheels 💯
@squeakycleanair Ай бұрын
@@BJW3Run small difference on wheels, tire profile might be tho.
@shawnyelle Ай бұрын
Use adhesion promotor
@squeakycleanair Ай бұрын
On glass lol?
@shawnyelle Ай бұрын
@squeakycleanair worked cleaned the glasses with rubbing alcohol then put a lil adhesion promoter on the glass helped restick it
@Speedycory6 Ай бұрын
Did you use the The cigarette lighter for your ACC source ?
@matthodson588 2 ай бұрын
Can you post a video doing a run on the street?....or closed road?
@squeakycleanair 2 ай бұрын
It's loud.
@MaalyJay 2 ай бұрын
Link to your car Jack?
@squeakycleanair 2 ай бұрын
Google Scissor lift
@havie8 2 ай бұрын
Have you ran into any issues or cel at all since swapping to a bov from diverter
@squeakycleanair 2 ай бұрын
Negative.
@Speedycory6 2 ай бұрын
So you ran the signal wire for the compressor to the Cigarette lighter socket in the trunk ?
@squeakycleanair 2 ай бұрын
To wire up remote wire of the 3p need an acc keyed source.
@mitchell98h12 3 ай бұрын
Wow this man is a life saver! My supplier didn’t know what the problem was, even airlift had no clue. But this makes sense, I’m going to try it tomorrow.💪🏻
@squeakycleanair Ай бұрын
Glad I could help.
@brians7es 3 ай бұрын
I’ve been going crazy for a few months trying to figure out what the noise was after getting new airtekk struts. This video is great and not a lot of shops have this knowledge at all.
@squeakycleanair 3 ай бұрын
Should of bought Squeakycleanair hahaha. Kidding. Your air struts shouldn't be doing that after a few months.
@landon_8888 3 ай бұрын
You can’t even pronounce it properly lol. It’s not a ladder line. It’s a leader line. And to suggest it’s not more durable or reliable to run a leader line is absolutely absurd.
@squeakycleanair 3 ай бұрын
Are you making fun of my accent because I am an immigrant to this country?
@ethanaldrich597 15 күн бұрын
It is more reliable but what he’s saying makes sense that even if you don’t route the leader lines properly they will still fail no need to be rude about the info he’s giving
@vxo- 3 ай бұрын
Could you please answer what kind of bags did you use in the front and in the back? I missed that part. Also I'm curious to hear what are the most important thing I need to remember when bagging W140? I suppose I need heavy duty suspension because of the huge mass of the vehicle and 3/8 airlines? Compressor could be something basic, right? I consider getting 2 smaller air tanks because my trunk has already limited space but the total capacity will be around 5 gallons just like yours. Im just struggling with this topic alot because I dont know much about this. (really like your rims🤩 What are they?)
@squeakycleanair 3 ай бұрын
Read description. Link is in there. Purchase kit here. squeakycleanair.ca/products/mercedes-w140-with-or-without-sls
@vxo- 3 ай бұрын
Does this kit include everything I need to be able to complete my suspension? Including water disposers and stuff like that? I was just curious to know what are the recommended features of each part. Thx for the link.
@squeakycleanair 3 ай бұрын
@@vxo- link is for suspension kit(shocks with our exclusive bags and brackets) without management that's extra and is available on the site as well. Bagging a w140 properly isn't cheap.
@vxo- 3 ай бұрын
@@squeakycleanair So I will be needing air tank, air lines, compressor and water disposer after the kit?
@squeakycleanair 3 ай бұрын
@@vxo- yes :)
@FetucciniAlfredo180 4 ай бұрын
Dude this is awesome. Will this fit on my 2019 Tiguan R Line?
@squeakycleanair 4 ай бұрын
Yes
@stateboy80892 4 ай бұрын
Just replaced my check valves with the SMC check valves but I'm still getting an air leak out of the compressors intake port... Hmmm is there a torque spec for these?!
@garns8878 4 ай бұрын
This is exactly the information I've been looking for about seamless tanks and whether the drain port will need a spacer. Thanks for your help!
@squeakycleanair 4 ай бұрын
Glad I could help
@user-vv8uh5mx3r 4 ай бұрын
Will this work with 07 Jeep grand Cherokee Laredo Or where can I buy a kit from
@user-vv8uh5mx3r 4 ай бұрын
Will this work with 07 Jeep grand Cherokee Laredo 1:42
@user-vv8uh5mx3r 4 ай бұрын
Will this work with 07 Jeep grand Cherokee Laredo
@user-vv8uh5mx3r 4 ай бұрын
Will this work with 07 Jeep grand Cherokee Laredo
@roruphotography 4 ай бұрын
That looks nice man! I was actually thinking of doing the same!
@squeakycleanair 4 ай бұрын
Sweet. Yeah works nice.
@Bacardibombillo 5 ай бұрын
Please do video on "Divorce rear System" ❤
@Bacardibombillo 5 ай бұрын
All other products is a "Yes" but these side skirts are a steal.... no way Ill get those.
@erdemboy1375 5 ай бұрын
yes, safety glasses are very important when working with this, because when you have your head hit by a spring flying at a speed of sound, glasses can save you from getting hurt
@milsgarage 5 ай бұрын
Holy crap. Not low enough? i'm gonna tell them not to get the coilovers.
@squeakycleanair 5 ай бұрын
?
@milsgarage 5 ай бұрын
i won't modify a spring for low @@squeakycleanair
@squeakycleanair 5 ай бұрын
@@milsgarage not the best option for coilovers and many times high end kits need to be modified this way as well.
@QrazyVR30 5 ай бұрын
Show HOW TO DISCONNECT THEM NOT JUST WHICH ONES TO DISCONNECT MY GOD
@tsteele1533 5 ай бұрын
So if I adjust it, I’ll be able to fully air out like before? Cause currently I think I have to much thread on the front and possibly too little on the rear.
@squeakycleanair 5 ай бұрын
It all varies on struts. Not all air suspension is the same. Just gotta play. You don't want the strut to be too long too.
@tsteele1533 5 ай бұрын
I have a 2004 Lexus LS430 on Airforce Struts with airlift 3p, and my car feels static at my ride height is about 66-72psi all around which wasn’t far off on recommended cause they are large bags, and it seems so stiff no matter how much psi I go even if it’s 110 feels the same as the 70. Should I adjust the dampening to the softest or softer in the front and rear? My ride is good at that psi and my air out is perfect at 0.
@squeakycleanair 5 ай бұрын
Hey. Have you contacted air force ?
@tsteele1533 5 ай бұрын
@@squeakycleanair no I have not bought these second hand but good condition. They do have dampening and I believe 32 way adjustable and I found out the fronts were fully stiff, have got to the rear but the rear still is very static probably need to go max soft as well.
@squeakycleanair 5 ай бұрын
@@tsteele1533 sounds like a good idea.
@tsteele1533 5 ай бұрын
@@squeakycleanair update tried adjusting in so many different setting, full soft, hard, middle, conclusion is I think I just bought crappy struts unfortunately.
@squeakycleanair 5 ай бұрын
@@tsteele1533 hey maybe shorten them to allow for more travel. Or if too shortened extend then a little bit and compensate with dampness. If you tried all that then yes perhaps you bought a dud. Sorry to hear man
@nopiatl 5 ай бұрын
I'm not in love with the marketing I'm in love with who sells the best product at the cheapest price
@squeakycleanair 5 ай бұрын
Nice bro. Appreciate it.
@dommiewrx 6 ай бұрын
do you know where i can get a new braided leader line?
@squeakycleanair 6 ай бұрын
Sure bro what bags
@Rewelsworld 4 ай бұрын
I get mine from bagriders
@tokyotoxic3144 6 ай бұрын
The fuse in the back labeled ACC isn’t an ACC signal?
@josh4856 6 ай бұрын
Does this just drill into the metal tub with stitchers? I thought its strange they would make you drill into the tub. Can you give some insight?
@squeakycleanair 6 ай бұрын
Yes I'm afraid it does. Tradeoff unfortunately but I find side steps look too cheezy. Drill small holes that can later be filled if you change the look.
@GaryTaylorvw 6 ай бұрын
Hi where did you get yours from ?
@squeakycleanair 6 ай бұрын
A couple of years back from Amazon.
@kaibintech 6 ай бұрын
❤❤❤
@DjTragik951 6 ай бұрын
That loctite or orange tape will hold on a 150 lbs pressure air tank?
@squeakycleanair 6 ай бұрын
Yes
@tidehunter12 7 ай бұрын
Hello, i’m trying to go with the threaded 3p did it comes with all the fittings?
@squeakycleanair 7 ай бұрын
Comes all part of kit from Airlift
@davidarmendariz8954 7 ай бұрын
So you will recommend to adjust the same length of the factory ones??? Because the come shorter for about 2 inches or maybe more
@squeakycleanair 7 ай бұрын
As close to possible of course. By nature performance air struts come a bit shorter.
@lamivan8857 7 ай бұрын
Thank you !! I just install my first air suspension and i heard a pump pump sound when higher ride height and now i know because of this video🎉🎉
@jdmfreakfb 7 ай бұрын
Hi what site did you find the sedan moldings?
@squeakycleanair 7 ай бұрын
Ebay
@colt5189 7 ай бұрын
I guess Loctite 545 would be the stuff to use to seal fittings on an air compressor like what you get at a hardware store?
@squeakycleanair 7 ай бұрын
That or any yellow or pink seal tape.
@williamroy1095 5 ай бұрын
Would 242 loctite suffice?
@dvsAC 7 ай бұрын
what tune did you end up going with, along with the dp?
@squeakycleanair 7 ай бұрын
Unitronic stage 2 eventually dsg and engine. No longer got the car.
@KingRatDog 7 ай бұрын
Cool idea! But how do you fish it through traditional pegboard against a wall?
@squeakycleanair 7 ай бұрын
Gotta be a space behind it to fit your pegs no? Same way!
@motofish64 7 ай бұрын
That's not a fix it's cutting them off
@sock979 7 ай бұрын
Could this happen in reverse if I have mine threaded too high up because I'm getting a popping sound over bumps even small ones. But I have mine threaded pretty high up (I have 7 in of thread showing and I used to be at 7 and 1/4 but the rear wouldn't go as high as the front so I dropped it a quarter inch to get them more) because I actually want to keep my car at the stock right height and be able to raise and lower it from there. It's a 2023 bronco sport. It's a new kit by universal air It was actually the Maverick one and then I asked them to make it work on my bronco sport because they're basically the same platform and he just had to alter the rear lower bracket as I understand it. So recently everything was finr and then I unscrewed it by just a quarter of an inch. So there was a quarter of an inch less thread showing and then all the sudden I'm hearing this popping noise a lot over bumps and they aren't big bumps.
@squeakycleanair 7 ай бұрын
Shocks not designed for platform perhaps not valved appropriately putting load on suspension where dampness of the shock isn't able to compensate. Is it a separated setup?
@sock979 7 ай бұрын
@@squeakycleanair no in the front. It's just like a strut. It's all together. They're the same platform. The only thing I can think of is because mine is the badlands stock. It comes an inch higher so I had to you know make more threads show so it would be sitting at the stock height normally and then what I wanted was to raise it up and down like two and a half inches each way and it seem to be working fine. But then just this last weekend I took a quarter inch out because the front could raise like an inch higher than the rear to make them sit closer together. And then that way also wouldn't have to put as much PSI in the front bags to get it to the stock height and all the sudden I'm getting this clunking sound. Oh also it seems like it's only on the front right?
@squeakycleanair 7 ай бұрын
@@sock979 ohh sorry front my bad. Rear shouldn't impact front tbh. If you're sure it's from front perhaps another suspension component went bad. Endlink? Something came loose perhaps after install?
@sock979 7 ай бұрын
@@squeakycleanair okay that was my other thought. Was something with the sway bar end links. Or maybe I didn't bolt the top mounting bolts down to the right torque again I guess I'll just have to go through everything. It's just so weird that changing the height a quarter inch caused this. Unless I messed something up while I was down there and didn't realize it. If I figured out, I'll try to remember to post it
@squeakycleanair 7 ай бұрын
@@sock979 check your locking collars on all 4 struts if they employed performance struts. As well as your top mount nuts. That would do it!
@stipem8360 8 ай бұрын
Hello everyone, maybe my question is stupid, does rubber ring in front bag (rings on schock absorber column) can be lubricated with some grease, or they must be dry?
@squeakycleanair 8 ай бұрын
O rings always benefit from lube!
@stipem8360 8 ай бұрын
@@squeakycleanair sure, thank you :)
@svenweller7818 8 ай бұрын
Nice Work 👍. What the rim and wheel size?. CCW LM20?
@Bacardibombillo 8 ай бұрын
Next videos on rear un married bags and shocks please. I wanted to raise my rear 1" from my lowest position. Should that be done with a aluminum spacer?
@squeakycleanair 8 ай бұрын
Another can of worms. Maybe one time in the future. Hahaa