Some heroes don't wear capes! Thank you, bro.

OMG... this video just made my day. I was going NUTS trying to figure out why I was having all that noise. Cheers man... thanks!

solved my problem!

Great video and content is clear and easy to follow. Thank you!

I did not read the comments, but it would have been nice had you set up a entire process of showing us programing a input into companion instead of using ones that you had already done.

Thank you for the video ! I have another problem, I absolutely can’t hear the output from the headphones.... the remote control was on the broadcast only a couple of times and this time I had to control the sound from the source of the stream....

Thank you so much!!!! This solved my problem! I bought new equipment and I really have no idea what I'm doing! I really can't thank you enough!

I just got rid of my Vidiu. The company my church bought it from revealed that Teradek is eliminating their lower level lines. Why? Too many issues with it kicking people offline randomly. I've even had issues just trying to get the thing to start. $600 piece of junk.

I have a situation similar to this, I use the Atem Mini Pro Iso and the streaming bridge, and a network switch. I DO Not have a Hyperdeck. I did use my Rodecaster to connect the audio into the Atem Mini Pro Iso. I am getting whooped by audio walk. I can't seem to offset the delay enough for my live streams to actually remained synced while using the Stream Bridge. Does any one else have a similar experience of starting a stream in sync, and then having an increased amount of audio desync as the stream continues?

Howdy from Dallas! I was driving around when I first found this vid and immediately downloaded it to my phone. This is priceless thank you!!

Can device work ok using just one usb node with telnet sim card ? Or do i need two usb sim gizmos ?

Sounded like you needed some holy water 😂

Excellent. Thank you for this video. I have wired lavs on a long cable and couldn't boost the signal sufficiently (the opposite of the problem featured in this vid) and the setting of Mic rather than the default of Mic + Pwr increased the gain boost and solved my issue [whereas the Mic+Pwr default would overboost a line level input thus causing the distortion experienced in the video, and thus the Line setting solved the overboost issue.] I didn't even know to look for this setting.

Thanks. Very helpful.

We don’t use stream deck or Companion but your video was really valuable to understand what it can do. It may be on the list of upgrades in the future. We do use vMix. Thank you for the behind the scenes look!

Hello, Which streaming encoder would you recommend at the end of 2022? The choice is between LiveU Solo, Teradek Vidiu Go and Teradek Wave. The unit will be used to stream from places where there is no ethernet connection. So bonding multiple mobile networks is a must. Thank you!

Great information...very Handy... 🙂 I'm following...

You saved my life man..thank you very much...🙏🏼🙏🏼🙏🏼😄😄😄

ᴘʀᴏᴍᴏsᴍ 😎

Hello Jerry. Great videos. Can you please explain when you get your signal from streaming bridge via Camlink into a computer, for a zoom meeting for example, how do you get the sound there? Is the sound coming out via Camlink as well, all synced with the video? Thanks

Good arguments for the Blackmagic Design ATEM Mini Extreme ISO

Good job 👍

Your video will be helpful to us newbees. BIG thanks.

Thanks for your help!!

How do you sync audio and video sir please help

Question how do you sync audio and video? Please reply or make a video

Slight misstep on the nodes and international capability. The nodes are regional, so a North American one would not work in countries outside of that region. Otherwise on point. We have been bulletproof with our.m setup on the vidiuGo

Enjoyed this Video. Thank you. What lens are you using with the Fujifilm X-T3 and the GH3.

Excellent video and diagram! why do you need the HyperDeck, streaming Bridge and CamLink? I thought you can do all that directly from the ATEM, especially if using vMix? Is it to be able to use one of the cameras for Zoom calls? Thanks in advance for your assistance!

this is hard to watch.

Hello Jerry, many thanks for the diagram. I got rodecaster pro and atem mini pro for live streaming, I'm having a bit of difficulty in the audio aspect of the livestream. I just want to get what is coming out of the rodecaster to the livestream. Any suggestions, please

Sorry but you can’t even compare teradek with LiveU. Teradek is not even a competitor. Use LiveU solo and you’ll see why. You talk about using an hotspot and having the choice on tereadek? You can do exactly the same on LiveU. I think you’ve never used a LiveU…

Thanks for the video. You show the part with the lowerthirds. In vmix you are able to import an excel sheet for the lowerthirds, right click on LT input, title editor and there data sheet. I was trying to set a button where i jump for- and backwards between the different LT's so i dont need to change it manually in vmix. It should be with the button "vmix: datasource - next row" in companion, also typing in the correct name and table but its still not jumping around. What am i doing wrong? Thanks in advance

you did not explain how to connect vmix to companion. you more explained the use of it

Great video! Thank you very much.

I like your count down timer where can I download it or share it with me please.

Crazy literally what I was looking for. Having issues connecting my X8 daw UA so gunna use my rodecaster till I get support! Probably better anyways to use this for your voice mics!

Atem mini extreme has 2 hdmi outs qnd 2 usb c post And Jonas has the playoutbee software for Pc Mac and raspberry pi which works like a hyper deck for 25.00

keep going bro

I have almost got everything setup (so damn close). I tried to get away without needing a network switch as I know nothing much about networking. I see you have linked a gigabit ethernet switch. Does it matter if it's 'managed' or 'unmanaged', can it be any gigabit ethernet switch, or does it have to have specific requirements? I need to buy it from the shop because amazon takes too long to deliver to New Zealand. The only differences between yours a my setup is that I'm using an Atem television Studio HD Pro video switcher, and I don't have a streaming bridge (nor do I think I need one)

Quick question - when recording from the ATEM, will it also record the sound from the rodecaster? Or do I have to record it off the rodecaster separately?

Many thanks for the diagram. As a newbie, I got thrown a bunch of equipment and asked to set up for a sport Livestream! I was like "say whaaaat?", Now I am getting a lot more understanding.

You did say anything about LiveU Solo

those colour changing lights are too distracting, pick one colour

Does that teradek allow you to stream to vimeolive as an option?

I have heard from friends that when they livestream for more than 4 hours or more teradek vidiu go sucks....

streamdeck has an app for vmix built in it's apps. You can use that and companion together. you can also use streamdeck macros to automate multiple actions.

I use vmix and a streamdeck. Not currently using companion. I have vmix setup to start recording when I do our intro. With companion could I get my DAW (studio one) to start recording at the same time?

Just got my stream deck. How to get my cameras set up in Vimix

You have answered a question I’ve had for months in my frustration to keep a Live Stream from tanking. I was clapping along your statement of testing speeds at areas before guests arrive and then speeds dropping dramatically once I started streaming. My theory is actually truth and you may just have lifted a huge stressor off my brain.