Hey, Nissan and Toyota, stop making cars! I am a mechanic that has become sick and tired of your stupid....
@collinrobinson-theblueprin85583 күн бұрын
Any info on the 3vz-fe swap? I about to do one.
@bitingantz2 күн бұрын
Engine has issues so gonna get rid of it.
@mirror01405 күн бұрын
how did you get your carpets like that?
@bitingantz5 күн бұрын
Pressure washed the carpet and used Meguirs iron remover and a brush to get out the rust spots. Thanks for watching.
@mapstx8 күн бұрын
Where did you source the rear strut mounts? Looked for mine on RA and they didn’t have them. Had to go to Amayama. Also, did you mention in the video if you went with the original springs or did you get new ones?
@bitingantz8 күн бұрын
Hello i used the factory springs and original rear mounts. The rear mounts i beleive are discontinued however there is a new set for sale on ebay .
@eoinmurphy243811 күн бұрын
I did a quick steering rack conversion using the pinion gear out of a mr s . Along with the geometry kit It just fits right into the sw20 power steering rack. Really cheap simple mod and takes the steering raito down by 30ish %. Don't know why more people don't talk about it I'm in the process of doing it to my own car this week. I bought the pinion for 100e Would a nice feature on the channel
@bitingantz11 күн бұрын
@@eoinmurphy2438 i will eventually upgrade one of mr2 as suggested so stay tuned.
@htet91113 күн бұрын
Can I plz ask this. I have not gotten the chance to save the bolts for my timing components when we strip it all down for a full rebuilt. Do you happen to have bolt specs (location, length, size, threat pitch, material etc) ?
@bitingantz13 күн бұрын
Hello. I dont have the specs. Are you saying you lost all the bolts?
@htet91113 күн бұрын
@@bitingantz yeaa. When I was throwing away the scraps, they all must have been in there haha
@legacy2b15 күн бұрын
Would you need to cut the bump stop if on lowering springs?
@sanjayseecharan636915 күн бұрын
Where are you located in FL ?
@bitingantz15 күн бұрын
Miami
@sanjayseecharan636915 күн бұрын
Send me a link with your shop info.
@bitingantz14 күн бұрын
Hello. I dont have a shop. Just a guy who enjoys working on his mr2’s as a hobby. Are you local to Miami?
@sanjayseecharan636913 күн бұрын
@@bitingantz St. Petersburg
@peterstewart380616 күн бұрын
I’ll be borrowing that 90 degree needle nose player to hold the top hat trick next time I have my suspension apart and am torquing the top nut.
@bitingantz15 күн бұрын
Cool, it was the easiest solution I could invent. lol
@larsbrown932217 күн бұрын
Hi, your videos are awsome. What tourque spec did you use for the cam bolts, i cant seem to find the info anywhere
@bitingantz17 күн бұрын
Thank you, 43 ft lbs for the cam Bolt and recommend using blue loctite on bolts.
@matthewbieser824118 күн бұрын
Good video
@bitingantz18 күн бұрын
Thank you for watching
@bowerboy118 күн бұрын
Do you know if this same trick works for all Toyota/Lexus OBD1 Airbag Lights? This would be useful if so.
@bitingantz18 күн бұрын
Dont know. Only can confirm for an mr2
@nazlyhelm426023 күн бұрын
really good video, thank man
@bitingantz23 күн бұрын
@@nazlyhelm4260 awesome appreciate the feedback
@nazlyhelm426022 күн бұрын
@@bitingantz bro, do hv manual doc engine for this 3sgte?
@Raulachu29 күн бұрын
I recommend removing the steering wheel to ease frustration.
@Raulachu29 күн бұрын
Nice radio! Wish I had most of the original stuff in the cabin. Switched the seats to Honda fit Recaros, I should have done more research but its comfortable.
@bitingantz26 күн бұрын
Thanks
@LuisRodriguez-lf3mgАй бұрын
Love the content !!! I'm curious what is that engine lid ? I really like that. I'm looking for something like this
@bitingantzАй бұрын
Thank you. The lid is custom made.
@frankhernandez6524Ай бұрын
Is this a better option than a 2gr?
@bitingantzАй бұрын
Definitely not. Old technology here. 2grfe is a much better option for so many reasons.
@supereffective321Ай бұрын
I did this swap almost 10 years ago. How long does it run before shutting off? Have you checked the oil pressure sensor?
@bitingantzАй бұрын
Will run for about 5-10 secs and shut off if you dont apply throttle
@bitingantzАй бұрын
The new plugs are installed as black from running less than 5 mins which suggests a rich condition. I swapped ecu and same result rough idle and shut off. Huge white cloud of smoke on initial start up between intervals
@supereffective321Ай бұрын
I suspect it might have a few wiring issues with the rich condition being unrelated to the car shutting off. Was the car ever running?
@bitingantzАй бұрын
@@supereffective321not running since we had it and previous owner reported similar issue to whats going on now.
@warrenpeasАй бұрын
you can also jump the FP from the diagnostic port right? really good that hydrolock didnt mess up the engine though i would be thanking God for that near miss.
@bitingantzАй бұрын
Yes but i also wanted to see what was in the tank.
@bitingantzАй бұрын
The car starts but huge misfire which was the issue the previous owner had. Installed new plugs and within minutes they were covered in black sooth, indicating a rich condition.
@daddybear007Ай бұрын
Timing belt check… also teeth on the bottom gear by crank Possibly had a broken/missing tooth on the gear the teeth the sensor read on the back of gear ? Good luck sir.
@warrenpeasАй бұрын
@@bitingantz I had to drop my tank clean it and replace fuel pump. It was like molasses in there after 20 years. But thankfully they left the tank almost completely empty. Not a fun job
@bitingantzАй бұрын
@@daddybear007yes i will check timing next. Appreciate the advise and open to more . Thanks
@frankhernandez6524Ай бұрын
Why does one have to change this alternator?
@bitingantzАй бұрын
The original alternator and bracket from your mr2 are transferred to the new engine.
@bitingantzАй бұрын
I don’t believe the gen4 alternator fits in the mr2 bracket
@frankhernandez6524Ай бұрын
Thanks.
@BTACE1347Ай бұрын
What bumper and grille is this?
@bitingantzАй бұрын
Border bumper with custom made grill
@dorariemАй бұрын
Kindly help me i need engine parts for my gen4 3sgte
@dorariemАй бұрын
Nice video
@bitingantzАй бұрын
What are you looking for?
@kgrspeedАй бұрын
I know the owner will do this MR2 justice.
@AllanDelosReyesАй бұрын
Wow big difference after good clean. Good luck on your new Black MR2 project.
@bitingantzАй бұрын
@@AllanDelosReyes thank you, it needed that clean
@texaslawdawg1902Ай бұрын
Man I hate color changes. Great find Ryan.
@bitingantzАй бұрын
I get you.
@JH-db9jcАй бұрын
nice find, that decklid has to go though lol. look forward to the future videos.
@bitingantzАй бұрын
The decklid is a love/hate relationship between the subscribers.
@JH-db9jcАй бұрын
No love here. Disrespectful to the legend! 😊
@mr2dailydriv3nАй бұрын
Name it the black mamba 😉😉😉 great video Ryan cleaned up well.
@bitingantzАй бұрын
Thanks boss
@musclecars92Ай бұрын
Do they come in stick?
@bitingantzАй бұрын
Yes
@eoinmurphy2438Ай бұрын
Plenty of work to do on this one. Will it end up beeing a full build/ full repaint?
@bitingantzАй бұрын
Full Repaint - doubt it. Will have to see how the engine turns out. Not sure if it will run.
@eoinmurphy2438Ай бұрын
@bitingantz best of luck with it. Always great to see a new project on the channel and another mr2 back on the rd👍 I finally got round to taking the engine out of mine last week. All went relatively smoothly, thanks in part to the hours of knowledge you guys put out there. 👍 4.5 hours on my own, I had it on the floor. Really glad it is out now it has oil leaking out of everywhere. Can't even make out where 80% is coming from at the minute. I'm going back at it Thursday to start cleaning it up
@bitingantzАй бұрын
@@eoinmurphy2438Great news on your project. Appreciate you tuning in and supporting the channel.
@s.u.6198Ай бұрын
the front bumper is ugly anyway... so better change it competely ;-D
@bitingantzАй бұрын
Need to source a bumper. Any leads appreciated.
@J.NOBODY.1Ай бұрын
I thought this car looked familiar as I remember that body kit from a video I had seen few years back. Definitely an interesting body kit. Had the same one on my mr2 and Just got done ripping it off for a full oem kit. Actually ended up finding the video too kzbin.info/www/bejne/qGjSp5qBpMSGidk
@bitingantzАй бұрын
The power of the internet. Engine sounds good.
@bitingantzАй бұрын
Im a huge fan of the oem look
@rootsmotorsports6984Ай бұрын
Looks like your cornering the mr2 market. I would like to see one with a rotary swap. Yuh nuh like ah 13b turbo.
@bitingantzАй бұрын
@@rootsmotorsports6984 haha , need to put a v6 and Kswap under my belt first. Rotary is trouble.
@grimsonАй бұрын
“I know one guy who likes it” yes you do! 🙋🏼♂️
@rootsmotorsports6984Ай бұрын
@@bitingantz 🔥 fi di K business bro. Lol.
@EdwoodCAАй бұрын
That's the kind of CAD I can get into! And if it's okay, I'm going wait for a proper moment to spring it on some people as a dad joke. Not even kidding. It's a perfect dad joke. Bravo, dude! My 91's t-top shades are still good, thankfully. But one of my dad's Z31 t-top shades had warped from the sun and then cracked. Been pondering how to fabricate an affordable working substitute. Thanks for the ideas/tips! Subscribed
@bitingantzАй бұрын
Thanks for the sub.
@EdwoodCAАй бұрын
Great idea on the 2nd one! And nice job on the hood prop! #3: Could run two Velcro™ strips under the carpet threshold and have a way to release with 2 pulls vs trying to grab the smaller elastic bands in an emergency. Also, less side to side play vs the hair ties, I'd guess.
@bitingantzАй бұрын
@@EdwoodCA good feedback. I have since riveted the original extinguisher bracket to the flat plate so its well secured.
@EdwoodCAАй бұрын
Another option was to do the Fred Flintstone mod. You get to use your feet for quick getaways!
@bitingantzАй бұрын
@@EdwoodCA lol
@twotal21Ай бұрын
that molded side skit looks good
@briancorrigan5350Ай бұрын
Nice video. Small point, at 30:25, Hold the hex on the (black)body of the Tie rod end while tightening the jam nut. Otherwise you have the body of the bearing end jammed against the spindle side spacers.
@bitingantzАй бұрын
Great feedback. Thank you for watching the video.
@derekdonnelly4364Ай бұрын
Hi How much is the 91 lowered on the stock suspension
@bitingantzАй бұрын
Hello. Thanks for watching. Please see link to video that details the measurements.kzbin.info/www/bejne/mmHWYpmkrbZ5i6ssi=JgXvLk2KToG-eBbb
What tool did you use to remove the screw in the very back on the heat shield?
@bitingantzАй бұрын
I dont recall the size. But the bolts are all star pattern.
@001dmanАй бұрын
the difference the Geo kit made on the handling of my car was pretty amazing. definitely the first mod any lowered mr2 needs to do before going for more power
@fijiwater3151Ай бұрын
does it need to be lowered for this kit?
@bitingantzАй бұрын
@fijiwater3151 yes, the kit is designed to correct the geometry for lowered cars.
@JayMotivation135Ай бұрын
The black MR2 was built by other KZbinr was amazing what happen to it I remember the engine was front a lexus
@bitingantzАй бұрын
Still trying to get details on the former build. I have a video of the car from 2014 but can’t find the YT Channel that documented the build.
@JayMotivation135Ай бұрын
The channel name is grenade Motorsports
@bitingantzАй бұрын
@@JayMotivation135thank you, much appreciated
@pearlwsz7Ай бұрын
I put a Wilhelm kit on my ‘91 4th Gen turbo and it was one of the best mods I ever did. Totally worth the price
@bitingantzАй бұрын
Do you track your car?
@leonardrobinson5249Ай бұрын
Nice video i may do that next. As of now I'm fighting my AC slider. I have it all connected but the slider is stuck so i can't move forward ,🤦🏿♂️ keep up the good work.
@bitingantzАй бұрын
@@leonardrobinson5249 You can move the slider from the frunk
@bitingantzАй бұрын
@@leonardrobinson5249 And if you remove the entire ac control panel you can pull apart and repair. The slider guide is likely broken and can be glued together or you can 3d print a new one.
@mr2dailydriv3nАй бұрын
Great video Ryan Super detail as always!!!!!! Cant wait to see the introduction and the plans for the new build!!!!!! LETS GO!!!!! Shotout to the wifey i need someone to record me hahahahah 🥹😅😘
@leonardrobinson5249Ай бұрын
Yeah She's the real MVP lol
@bitingantzАй бұрын
For sure , appreciate the shoutout to the wifey who is truly the Magic behind these videos
@mr2dailydriv3nАй бұрын
@@bitingantz 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
@keefjustkeith2 ай бұрын
Swap C30A or C32B from a Honda NA1/2 NSX into an MR2? Possible?
@ChristopherWilson-io8nh2 ай бұрын
What is the exhaust set up ?
@bitingantz2 ай бұрын
Frankenstein Headers with TCS y pipe and single canister dual tip exhaust.
@iamgavindavis2 ай бұрын
Nice job uncle!
@bitingantz2 ай бұрын
Thanks for the feedback
@iamgavindavis2 ай бұрын
Garage looking good Uncle!
@bitingantz2 ай бұрын
Yes man. Comfortable to work when its clean
@eoinmurphy24382 ай бұрын
Beautiful car. So nice to see it out and about 👍
@connoisseuroftigolbitts2 ай бұрын
This engine is in my rav4 and it’s a beast little v6