Thanks for the video, I made a jig just like yours for 3 inch spacing and got screws started in all my balusters. Worked perfectly! Saved me tons of aggravation!
@how-toswithaaron1618 күн бұрын
Awesome!! Love that
@NameThem888822 күн бұрын
Very helpful video, the original tune was rad as well
@shauncombee992728 күн бұрын
Awesome, and you make your own background music too?
@how-toswithaaron1627 күн бұрын
Yup! Thanks!
@oli77baba29 күн бұрын
My Costco 14mm laminates can’t tile can’t slide can’t bend, don’t know what to do at door jambs.
@how-toswithaaron1628 күн бұрын
Same process as seen in video, but if your pieces won’t bend you will most likely have to shave off the entire lip with the chisel, like on the video but all the way across
@darkestgreenmewtwoАй бұрын
other vids say lay from the door first to avoid this and work your way to the back
@how-toswithaaron1628 күн бұрын
Sometimes you can but most rooms will have more than one door, like a closet.
@tad2ikАй бұрын
Can you do whole flat in one continuous stretch of laminate flooring? Doing it across many doorways, some will be perpendicular to the other
@how-toswithaaron16Ай бұрын
Yes, it’s just a little tougher so I usually put a break middle or 3/4
@annaleesummer7710Ай бұрын
Genius
@dvader3000Ай бұрын
Where did you got your screen? Was it expensive?
@how-toswithaaron16Ай бұрын
a.co/d/3Rg6NAT Amazon, $150
@shinnick22Ай бұрын
Turn the camera 90°
@user-ni5rt3bk2nАй бұрын
I’m about to do this myself. What type of screws did you use for the frame?
@user-ni5rt3bk2nАй бұрын
Also is that a 2x4 screwed into the siding along the top? Or what is it and what kind of screw did you use?
@how-toswithaaron16Ай бұрын
Here is a link for screws I get at Lowes. Exterior deck screws. Yep exactly, a treated 2x4 on the top www.lowes.com/pd/Deck-Plus-10-x-3-in-Ceramic-Deck-Screws-5-lb/1000318525
@nukeeldaАй бұрын
I whould use rubber mallet.
@drdarrowАй бұрын
Too fast. Please be a teacher, not a demonstrator.
@how-toswithaaron16Ай бұрын
Here’s another video I made that may be better Hope it helps Solving the Doorway Dilemma: Laminate Flooring Tricks // Doing the impossible #diy #howto #flooring kzbin.info/www/bejne/kJXLi5SPqqyBf8U
@wesleehein28Ай бұрын
Brother… thank you for just getting straight to the point. Short and sweet intro. Total God send. Thank you so much brother! Straight to the point, clear instructions, good clear audio,absolutely fantastic job on the video. Subd for your way of making content 👌👍 Again. Thank you 🙏
@how-toswithaaron16Ай бұрын
Love that and exactly what I some for Glad it helped and thanks
@MarkSmith-lt3ugАй бұрын
Thanks
@NordicReptilesАй бұрын
What license would you need to build this yourself?
@how-toswithaaron16Ай бұрын
Just to screen in like in the video no license. To build the roof structure above it sometimes can require a contractors license, but if it’s your own house you can still do it, even permitted, yourself. But that’s just my experience and in NC so worth looking into yourself as well
@flaking305Ай бұрын
It almost seems to easy
@how-toswithaaron16Ай бұрын
Yep! The main thing to me is to staple top, then a side, and then bottom and then other side, like going around a circle
@jjscustomfabrications82342 ай бұрын
That’s some pretty ‘floppy’ hammer resistant laminate….
@SendinglovetotheworldАй бұрын
Looks like “luxury” vinyl.
@karenhitchens35632 ай бұрын
Excellent job! I’m going to diy my tattered screens and add a few more. Thanks so much for showing us how to do it!
@tmo65172 ай бұрын
Ain’t gonna lie… the original music is quite catchy!😂 I was humming in my kitchen this morning.👍🏽 Makes me very reminiscent.
@how-toswithaaron162 ай бұрын
Love that 😎😁
@davidoconnor32012 ай бұрын
Brilliant video 😊👍🏻 I'm putting laminate flooring around a toilet tomorrow, and I didn't have a clue 😁 thanks mate.
@dollymarcum72582 ай бұрын
Exactly what I needed to know ! Thanks 👍
@jonathandrew7002 ай бұрын
Finally!!!! This should be at the top of the list. Thank you. I’ve done this before years ago with my grandfather. Just needed a refresher. Money saver
@lporter1152 ай бұрын
So genius exactly what I had envisioned in my mind but $10 is even more fabulous! Thank you!
@destinymartinez6093 ай бұрын
this is genius, last year we had to get it done quickly on our old porch, i just stapled screen to the wood and survived the winter wind by re stapling jt as they blew off every now and then- this year i am doing section of my porch at a time to redo it, pulling the staples, staining, and screening this way. i'm so excited because of this video! thank you!
@how-toswithaaron162 ай бұрын
Awesome! Glad it could help!
@James-BB703 ай бұрын
Many thanks! I was attempting a board in exactly the same position around the basin pedestal, your method worked a treat!! 👍
@learnjcbskidsterchickensga75943 ай бұрын
I have a 10 foot skiddy implement shed…hope this might work!
@physiques3 ай бұрын
Super helpful, thank you for sharing 🙏 Could you tell me what size staples you use?
@how-toswithaaron163 ай бұрын
T50
@physiques3 ай бұрын
@@how-toswithaaron16 Thank you 👍
@mattnorth97813 ай бұрын
Someone else may have commented this already. I have made the mistake of not fully undercutting the jamb. I just undercut the door trim and the notch. You clearly cut the entire jamb casing. That's helpful as well and an important first step before even trying to cut it in. I've said more curse words doing this than just about anything. Very helpful.
@Aaron-vj9xq3 ай бұрын
Aaron, I built a porch and couldn’t find a way to screen it properly. This seems like the fix. May I ask, what lumber pieces do you have? It looks like 2x2 pine. Is it treated? Also, the other Issue I ran into is screening materials. I only found screens 3 feet wide and my windows are about the size you have. What size lumber and screen did you get and where did you find it? Thank you, Aaron
@how-toswithaaron163 ай бұрын
Yep you got it right 2x2 treated 8’ screen from Amazon Here’s a link a.co/d/89vgia2
@jdo3333 ай бұрын
Thank you!
@jdo3333 ай бұрын
awesome
@krehbein3 ай бұрын
Honestly this is better and easier than those screen systems you buy (the vinyl and aluminum ones). Speaking from experience. I have the aluminum Screen Tight system, and installing screen is a pain. My screen needs replacing so tearing the track out and just covering stapled screen with 1x material. This is a cleaner look and you don’t have to mess around with cutting and installing the track and the screen with spline. Cheaper too. Also, buying a power or air stapler makes things 10x easier.
@how-toswithaaron163 ай бұрын
Exactly, totally, and 100 Thanks
@distruptivesuburbia20813 ай бұрын
You save me at least 30 minutes of cussing and fussing. I didn’t have a chisel handy but my paint scraper did a nice job. I have always been able to just beat them in place but the laminate I am installing today is made out of salt dust and glue lol. Liked and subscribed
@how-toswithaaron163 ай бұрын
Woohoo!! Love it
@jadedparadise193 ай бұрын
Nice video. I like the blocking under the deck. How far apart can/should the posts be?
@how-toswithaaron163 ай бұрын
Usually between 6 and 8 feet max
@williamhunter6583 ай бұрын
Great video!!! How tall are your handrails ?
@how-toswithaaron163 ай бұрын
The top is at 36”
@psyl3ntkn1ght103 ай бұрын
I'm getting ready to transform my day room into a screened in porch and this is just the video I was looking for! Do you have one of you framing up the porch or was this already built? Either way, awesome video!
@how-toswithaaron163 ай бұрын
Yep it was already built Thanks for the comment!
@tiffanydavid72124 ай бұрын
Did you do a door? If so how?
@how-toswithaaron163 ай бұрын
Same system for above the door, and bought a screen door from Lowes
@MrHabitat0094 ай бұрын
Talk about straight to the point and useful! Thanks
@how-toswithaaron164 ай бұрын
Eeeexactly
@azaan16324 ай бұрын
What size screen did you purchase?
@how-toswithaaron164 ай бұрын
I got 8’
@azaan16324 ай бұрын
How did it turn out???
@how-toswithaaron164 ай бұрын
Wonderfully
@davidhamlin17424 ай бұрын
The wood strip you nailed over top of the staples appears to be a 1x2. Was this item purchased? Or did you rip a 2x2 in half? Great method. I will use it instead of dealing with spline.
@how-toswithaaron164 ай бұрын
Exactly, a 2x2 that was ripped on a table saw
@angelreyesespinoza56864 ай бұрын
Que medida son esos barrotes
@how-toswithaaron164 ай бұрын
1 1/2” Los llamo 2” deck spindle Perro esta 1 1/2”
@angelreyesespinoza56864 ай бұрын
@@how-toswithaaron16 1 1/2 x 1 1/2 ? Gracias 🙏
@Despierto19834 ай бұрын
I’m looking forward to making on my porch myself thank you so much for sharing
@denisealbert70744 ай бұрын
Where did you get the screening?
@how-toswithaaron164 ай бұрын
Amazon Here’s a link a.co/d/51HAa62
@tamarar.46424 ай бұрын
Thanks for this video! I stay in a mobile home park in Louisiana. I’m allergic to mosquitoes! I end up in the doctors office every summer because of mosquito bites. I’m determined to NOT be inside during the summer this year 😂. I’ve got my mosquito machine and solar ceiling fan ready but I needed to screen the porch for more comfort. I bought tinted screen for privacy.
@how-toswithaaron164 ай бұрын
Awesome! Glad the video could help you reach that great goal. And bless you in Jesus name!
@Cocovega7784 ай бұрын
Gracias justo lo que necesitaba saber para hacerlo yo misma Gracias