That was very helpful. Just what I was looking for.

my radio tx rate is currently 25w, how do i change it to 35w?

Hello. Can I plug RH1200 to TS15 and connect CS10?

great video

Hay

So helpful! Thanks

Great tutorial and I note your comments about the installation of the 833039 key to use a TS12 with the CS20. Our problem is that in Australia our Leica wholesaler refuses to sell the key for "commercial reasons" (I read this as - we want you to upgrade your instrument). Can you suggest a solution?

Love the video, we're finding so many glitches and issues with Leica in general that they don't really address with basic videos like this; my biggest issue with the cs20 is their keyboard; we have 10 of these units and almost all of them have keys that have faded completely and the side rubber bumper is detached from the housing

Hello My Leica GPS 1200 date is incorrect to current location. How can I resolve it

Do you have Leica TPS 100-1100 total station calibration software?

Hello Jeff , How can i get the Sheet Report for the Traverse ? i would appreciate your help

Great video Jeff! Thanks, Christian Offenburger

Wow. I didn't know that in scale when setting up to a back sight you should set the scale to current set up.. I'm having issues using a UK os system OSGB36 and was getting errors all the time when checking my distance to my back sight shot.. Should you always use the same coordinate system in the TS as the one the control was shot in with a RTK gnss rover..??

Jeff, YOU ARE A LEGEND! Thank you

Why is there no text file in the job file when you export job. How do you export job folder with asci file.

Great job

Great video. Thanks for posting

Thanks Jeff! I've been trimble for years and recently scored a job with a company that's Lieca based. What's your video recommendations on GPS setup and potential rookie errors for both TS and GPS? I believe they use the latest gear

Thanks for your inspired video, but I have a little of confusion! and I think I am in trouble! pls, help! Are closing point (or misclosure point) and closing station different? I think the traverse app in Leica Captivate and its methods are different from those in Leica Flexfield like TS07. I performed a traverse using TS07 Total Station, I had just two known points (K95 & K96), I wanted to perform a Link Traverse but I thought it is impossible to doing it, because I had just 2 points! but What I did is some way looks like a (closed loop) traverse! Whatever, I started at point K95 and backsight K96 with (known backsight) orientation method outside the traverse app, then I entered the traverse app and I chose (with known backsight) method and did the same as the orientation when 1st setup, then the traverse started and I measured Back and Fore sights till I arrived the other known point (K96-initial backsight!), I setup at (K96), I shot backsight, then I hit the (Close) button before measuring foresight and a window appeared (it included different options, one of them stated "At known Station to Known Closing Point") I chose it and I selected the closing station as (K96) and the closing point as (K95 - the start station). Then it finished the Job and I Adjusted the traverse inside the total station. When results appeared, I noticed that the last distance (K96 To K95) measured, not included in the adjustment, why? and my end station appeared as point K96! Did I perform the traverse in a wrong way or what? or the closing point is just used for close the angle to calculate the angle misclosure? for checking weather I'm wrong or not I processed the raw traverse data with Leica Infinity and achieved the same result with very small discrepancy. You didn't hit the close button and the total station closed in position when you were at point 4 and foresighting point 1!! so I didn't understand your point of misclosure is point 1 or point 6? and the total length of the traverse is 1 to 1 or 1 to 6? also my traverse is true or not, however I got a very accurate result!

Your way of explaining is very good Jeff, showing field data is the best way to understand the benefit of each application.👌✌

Hello, your videos are very good, very well explained, greetings.✌

This is a good set of videos I was looking for ... Thanks for your time and effort explaining traverse.Lets say that our reference control points have 0.99927162125 scale factor. Where we are going to apply that to achieve our target points will have the same scale factor at the end to use so all our control will have the same scale factor when we put all of those control points into a job to use and that job will have that scale factor applied...

I am confused with the scale factor. When you pick the Current setup option, is it calculated from your traverse? at the end?

clear explaining, but how to export traverse field data file from Leica TS07 to be read into Leica infinity??

How do you stop this thing from averaging my points? How do I get it to keep my points in line instead of the order they were shot on the point list? How can I make this thing more like a Carlson? This is absolutely the most frustrating user interface I've ever had the displeasure of using. Help, Jeff. This thing is making a monkey out of me.

Thanks Jeff! Please how do you get a copy of the results for field calibrations. I read somewhere that a .frt file template is required in order to output the field calibration results. Please how do I get this template?

That's a great report sheet, where can I get one?

In your first example you have all point codes for what I have set up as linework. I was just wondering how this works back in the office. Thanks.

Brilliant! Thank you Jeff.

Can we setup the base RTK to transmit via UHF and 3.5G at the same time?

GREAT video and very useful information !!!, please add more other topic videos !! :}

شرح عربي

Hello Jeff. Thank you so much for taking the time to make this video and for making this publicly available. Your channel is a goldmine. Now at 16:07 "make sure it's programmed in the same frequencies". I cannot emphasize this enough. I have used the Pac Crest PDL4535 radios with my Leica GX1230+ Base (it is also 35W radio) and I learned the hard way that the TX radio at the Base needed to be programmed with the exact same frequency table as the RX radio at the Rover. I had to pay for a Pac Crest reseller to send me a frequency table for my radios to fix it. I can say that I am quite comfortable with my Leica 1200+ units but these are getting old. I have a few questions for you: 1- What is the frequency range of the Satel-EasyPro Transmitter radio that you feature in your video? 2- How many channels are usable on it (for comparison my Pac crest PDL4535 has 16 channels)? 3- How did you program the channels on the Satel-EasyPro radio? Does it require any specialized PC software to do it? 4- How did you program the channels on the Satel RX radio on the GS18 rover? Does it require any specialized PC software to do this or can be programmed from the CS20 data collector directly? 5- I could see from the video that your Satel-EasyPro radio has a 12.5kHz channel spacing. Is it reconfigurable to use the 25kHz instead? 6- Last but not least, do you think that it is compatible to use a Satel-EasyPro TX radio at the Base and using my existing PacCrest RX radios at the rover if I make sure that they use the exact same channel frequencies? I am asking this because I saw that you are using quite different Satel models at the base and rover (Satel TR1/HPR3 at the Base, SatelTR4+ at the Rover). It would be nice if Satel is intercompatible with other radio radio brands like Pac Crest if one is using Transparent protocol, while making sure to program every channel frequency the same way. Looking forward to hearing from you. You earned a new subscriber.

Thanks for taking the time to put this out there!

P R O M O S M 😆

You are GREAT!!.

thank you for taking the time to make this video. It helps a lot.

cool

Hi. I also made a copy of the entire DBX folder but I can't find my txt files?Please advise..

Hi…jeff sir

This tutorial is excellent! Greetings from Indonesia

Did anyone have a problem that you couldn't see a job in Data folder, but could access it through Captivate? I made a copy of the entire DBX folder before clearing but cannot find a certain job. The job wasn't in the DBX folder.

It’s Jason Barringer with South Texas Surveying. Love the video.

Thank you Jeff! How does one generate the traverse report file? It sounds like Leica does not provide a "default template" for that report file... why do you suppose that is? Is it just to make us have to buy Infinity? Can I create a traverse report file using NotePad? If I know of other surveyors running a CS20 with Captivate... can their file be used in my collector? thank you again for this demonstration. My dealer was not able to show me the Traverse application in full.

I run a TS15 with my CS20, and a great tip as you mentioned to check instrument firmware compatibility with the new CS20 firmware version.

Can you re enter the original pre adjusted traverse file once its adjusted?

Thanks so much for adding value to the larger surveying community with this video. @ 6:26 did you say can or cannot be edited in Leica Infinity?

Did the topo points 1000 and 1001 change after adjustment?

Thank you for this video

Hermoso video, gracias :D