Not saying its right or wrong but in the army we were specifically taught to put some oil in those 2 holes and lube up most the parts pretty wet. We also cleaned our weapons regularly tho more than most civilian shooters would

Bro getting his A.I Weapon Ready

Regular ammo huh

Did you add a backing plate to the handles? How well has the plastic held up to the handles?

Good ol’ 1911.

funny shit]

I put a good squirt in the gun and manually slide the bcg back and forth until it feels nice 👍🏼😅

You should ALWAYS drop oil in those holes where gas is expelled from your carrier because that is your gas ring run. The AR15 bcg uses an internal piston to operate… And your gas rings function identically to the piston’s rings on your car.. You DEFINITELY want those lubricated. I don’t see a point in putting any oil down your gas key, though. Personally, I lube up the four rails which contact your upper then I put a bead of oil around my gas rings when my bolt is disassembled, then I put it back together and lube up the cam pin/cam track and I’m gtg.

I am telling you now. Even the Navy Seals guy is putting oil in that vent hole. Navy seals and Army SFG, dunno about MarSoc; there are a lot of tons of dummies. They were physically strong enough to pass selection but not smart enough to make it through more than two contracts. There was a guy dumb as fuck barely passed selection. He even caused friendly fire, couldn’t listen to instructions, and couldn’t maintain his weapons, so his MK18 was seized on a mission. So he had a bad reputation, and nobody wanted to team up with him, but we have no choice sometimes, especially in the small team units, right? he was forced to ETS. I saw this MF on some KZbin channel, advising people on how to clean the AR. I was shocked and shook my head. He poured CLP on the vent and bottom of Mag Insert, slid back CH 5 times, and said, “This is how badass clean their weapons. Now you’re good to go for another 1000 rounds.” smh, bruh. seriously smh…. that's what I’ve been telling him for fuckin 3 years not to do and still doing shit bagging and innocent Wanna-be-GI-Joe- civilians were buying him because he was simply a SEAL???? This is a clear example of how nonsense information is flooding the internet. Bout 90% of Infos on the internet is wrong. IMHO

That to me is WTF why would you even think of doing that?

After installing mine, (2010) my mpg’s took at hit. Was avg 19.8 now 16.9 . Not sure if it’s a heavy foot I love with the sound, or more air is engaging the turbo burning more fuel.

Been oiling mine for a minute and running suppressed. A drop or two in both holes while in and out of battery and then work the shit out of it so it spreads around inside. I also do this all after the range.

Lee sporting lower and super safety INCOMING!!!

Really depends on oil type. If you're using quality oil like a CLP or most synthetic gun oil out there then it'll be OK as they break down carbon and helps seal the gas rings. Gun oil is build to withstand high heat and pressure thus they won't gunk up.

That’s crazy, I’m looking to go to an SUV from a WRX and these cars if I’m able to find one seem like the dream besides being available in auto only

Need a pressure pad for that light.

Larry Vickers already disproved this video.

U can put some but not where is dripping oil 💀🤦‍♂️

Loved it. Moms great! Seems a little more rubber might be in order… I had a 98 C5 vet A4 auto. The best things about the car was it was convertible and got 32 mpg on the highway. Fast it wasn’t. So, get rid of .273 gears & pop in 3.42 and add 9 lbs of boost. While not super fast by today’s crazy standards it was then. Supercharged C5 Corvette - smoking tires from a 35 mph roll kzbin.info/www/bejne/jJqpmp19mbyahpo

I’ll use my 70 series Colt with some cast handloads. Lee 255 45 Colt mold (drops at 261 grn) - powder coated - some healthy charges of Alliant Power Pistol. Warning: high pressure loads… don’t blow your face off. kzbin.info/www/bejne/omOwd62qiNp1j8Usi=EW_2qp-xLZgvj0Ju

🔥🔥

My gas rings just blew after 1200 rounds, sending it back to BCM but I'm curious if putting lube on the bolt race could cause this?

wiener

The carcano: 🗿

Was that a carcano?

Anchor trolley would have kept that from happening

Mach Mouth..

Exactly ! So much bad info on KZbin putting oil in them exhaust ports just blow out. Good job 👍🏻🇺🇸

What is the Part Number? Thanks

2 questions what is a ranger band and the purpose of it? And what is that little pouch that you got for 10 dollars?

Beretta all day!

U need Honda data and a muffler and ur set

Hey! Would it be ok to feature your clip in a video we're making? You'll be credited with a on-screen watermark and in the description/pinned comment. - Babatunde

Homie shouldve beat your narc ass before you calked his manager..pxnk asz mayo boy

I pack the entire upper with ngli #9 works very well, pack the trigger group and barrel as well, even in the buffer tube!

For anyone wondering, the TOURNIQUET IS NOT IN SEALED PACKAGING. I STAGE IT LIKE I DO MY OTHERS AND KEEP A PIECE OF PLASTIC OVER THE TOP THAT FALLS OFF WHEN I TAKE THE TOURNIQUET OUT OF THE HOLDER. It's the 2nd most important thing in my belt, so I protect it as much as i can. I actually train with my equipment so it gets wet, muddy, sandy, etc. I also have 2 on the front of my plate carrier for use on myself. The one on my belt is so someone can use it on me or someone else if I'm not able to.

I gotta say I’m not the biggest fan of 5.11 products but I do like their bags and belts quite a bit. The battle belt is really nice and isn’t as stiff as some of the more expensive ones

That's a great hack. Thanks for letting me know. The WRX blow off will fit

I’ll never understand why people are lazy with cleaning their guns. There’s nothing more therapeutic than meticulously cleaning your firearm after a range day

When I got my first ar15 I used to do that and noticed on the bolt tail there was carbon building up(like to the point where the taper towards the rings were getting dimensionaly thicker) which was hard to clean.

Barrette obviously

The china lake!

Just ordered one of the yak attack rod holders after seeing yours. Great video

what size angled steel?

How is the5.11 belt holding up? How secure / tight are the pouches?

That’s my great great uncles work right there 🫡

Could this cause problems with the bolt not picking up the next round? Or is that another issue?

But as you said that's for di how bout standard short stoke?

Watch alot of Garand thumb do ya?

“Filthy 14”