How do get stereo out of it? I thought it was only mono left or right but no way to get stereo?
@akbrakes9412Күн бұрын
thx for the parts link but u didnt show how u installed it..u jump cut the vid too much. I would have been nice to see it step by step.
@MateoSanchez-24 күн бұрын
Nice work
@twistedartisan213123 күн бұрын
Thanks
@MateoSanchez-24 күн бұрын
Hi
@dadorailshotts755Ай бұрын
will it switch on positive and negative ,not using the rem lead and what is rem for?
@killakam99012 ай бұрын
Hey im connected through High level input, This wont power on my amp, at first it did for a sec, then it wouldnt after that? when i use LOC then rca to amp it still doesnt Turn on my amp..? but when i just go back and use m loc then rca to amp, My Amp Turns on? but only Direct from loc?? My last Dsp worked from high input? is thier some SETTING ?? that Turns on AMP ?control Am i missiong SUmthing??
@JacklinSmith-ep9wt2 ай бұрын
Awesome I like that I never do it like that before so thanks for sharing this with ma
@jasonharmon82153 ай бұрын
Great job . Looks awsome . Plus Fav. Color is Blue !
@ORIGINAL__ONE3 ай бұрын
Where are you located i have a Cherokee doing this
@ngangsom29094 ай бұрын
So we pay season passes and we have to pay other ride too.
@twistedartisan21314 ай бұрын
You can also get a day pass. A season pass is not required. It includes all activities except for one zip line. But they do have other zip lines there that's included.
@ngangsom29094 ай бұрын
How much season passes for each person.
@twistedartisan21314 ай бұрын
It’s $150 for adults and a little cheaper for children. This is for a full year past 365 days from the day you purchased. Outside of standard activities. They also offer music and nightlife.
@ngangsom29094 ай бұрын
@@twistedartisan2131 $365 for the family or for $365 for each person. Thank you so much for your help. I have 2 children and 3 adults.
@dazma33904 ай бұрын
OKAY WTF IS THIS CAMERA WORK CMON MAN, IF YOU’RE GONNA RECORD ATLEAST SHOW ME WTF
@twistedartisan21314 ай бұрын
First, thanks for watching. But this is a short. Where they cut my wide down and show you just a small portion of the full video. Here's the link to the full video where you get the full view.kzbin.info/www/bejne/fWeUf6Gdiaioqqs
@joaquinsanchez77234 ай бұрын
Prv 😣….powerbass 😖 ….oh nooo 🫣
@twistedartisan21314 ай бұрын
When properly installed these components work great. The system sounded amazing!!!
@kapilakumarasinghe42814 ай бұрын
Good
@sinisterstitchescustomupho18174 ай бұрын
Awesome
@twistedartisan21314 ай бұрын
Thanks for checking it out.
@IOSALive4 ай бұрын
Twisted Artisan, I really like your videos! Let's be friends!
@twistedartisan21314 ай бұрын
I appreciate you checking out my videos. I’ll look for your KZbin page. Thanks again.
@soldiercoleone4 ай бұрын
What size bearing do you use for your sa im kinda ocd I gotta figure the proper dimensions haha smh
@twistedartisan21314 ай бұрын
Typically for me about 3/8. But I have different size bearings, depending on how you sew. Not saying this trick is for every job. But for like a gym seat, something that you need to be fast and efficient on. This trick is ideal
@um_fu13264 ай бұрын
My first car was a d21 (hardbody) extended cab that had 415k miles and then my brother got it from my uncle it got stolen 4 times crashed a couple looked pretty rough still ran great then I got it and just drove the wheels off of it the worst part was you could open the driver side door with your thumb nail or anything that could turn it (key broke off inside😂)
@um_fu13264 ай бұрын
And now it sits in the field behind my house and it starts every time I charge the battery 😂
@twistedartisan21314 ай бұрын
I had one as well. Loved the four cylinder eight spark plug overdrive set-up.
@Rpmdetailing4 ай бұрын
I’ve seen this same brand with a Bluetooth function for tuning, how do you wire the remote and a headunit to it)
@twistedartisan21314 ай бұрын
I haven't used the Bluetooth unit. Either the head unit has to have Bluetooth sending capabilities. Or it's still wired through rcas to the crossover. But your phone can send signals directly to the crossover to run the full system.
@aereree4 ай бұрын
That's one bad @55 Suburban
@twistedartisan21314 ай бұрын
It's an outstanding build!!! Glad the owner shared some insight. Thanks for watching.
@reallybro16114 ай бұрын
Sweet build! Congrats!
@twistedartisan21314 ай бұрын
Kevin and the team that built the truck did an amazing job. Thanks for watching!!!
@glotrim4 ай бұрын
We used magnets 🧲 to attach the 60 foot GloTrim Bear sign on the underside of the bed cover for “The Bear” 🐻 SEMA truck. Most underrated attachment method I also like using snaps for older vehicle door panels and such
@twistedartisan21314 ай бұрын
There are a lot of build methods I use that I take for granted that other people just don't know. 30 years in the industry and I've picked up a thing or two about a thing or two.
@coursehome5 ай бұрын
Man that is a very nice seat. Mark Tennessee
@twistedartisan21315 ай бұрын
Thanks for checking it out.
@sewforlife57285 ай бұрын
That's a built in walking foot. That is a industrial machine that is built with that foot.
@twistedartisan21315 ай бұрын
Great question. Yes, it is a industrial machine with a walking foot. And it's a weltcord foot for close sewing to the material. Thanks for watching!!!
@1off8515 ай бұрын
Clever
@twistedartisan21315 ай бұрын
Thanks.
@1off8515 ай бұрын
Got my curiosity can't wait to see part 2 what else you got up your sleeve
@twistedartisan21315 ай бұрын
Perfect!!! Stay tuned...
@1off8515 ай бұрын
😂
@jalenjackson98845 ай бұрын
For the bulk of the foam, use a long saw blade, then you'll just have to even out the surface. Otherwise, the dust is unmanageable
@twistedartisan21315 ай бұрын
Yes, most definitely. I was on site at a different location. Going to be doing an updated video a little more in depth. Thanks for watching and leaving some insight.
@preciousdiamond765 ай бұрын
Comfortable bum padding on a good car chair...
@shesintheshop5 ай бұрын
Nice job. Gonna check this product out!
@twistedartisan21315 ай бұрын
Thank for watching!!!
@jimmyfavereau5 ай бұрын
outside the box <3
@twistedartisan21315 ай бұрын
Thank you and thanks for watching!!!
@1off8515 ай бұрын
Is it possible to get similar results with the foam in a can?
@twistedartisan21315 ай бұрын
If you’re referring to The Great Stuff that comes in a can. No, although it looks the same, it will melt under the heat of the fiberglass resin when it kicks.
@1off8515 ай бұрын
We need some more of that finished product after watching it get made
@twistedartisan21315 ай бұрын
Yes, sorry it cut the ending off. I didn't realize that I was going to repost just the reveal tonight.
@1off8515 ай бұрын
Some nice large Car
@twistedartisan21315 ай бұрын
Most definitely. These are big kid toys!!!
@1off8515 ай бұрын
Lol
@redryder88346 ай бұрын
Very cool reflective effect with this piece
@brianbelcon87236 ай бұрын
There is no stereo here
@twistedartisan21316 ай бұрын
Yes, I have heard that the new DPS is mono input and output. The first generation DSP must have had left and right inputs with programmable outputs as that stereo system had left and right balance after install. It was installed multiple years ago but I remember programming each channel left or right and checking it after completion.
@MateoSanchez-6 ай бұрын
Hi, nice show
@twistedartisan21316 ай бұрын
Thanks for watching.
@richardfrance95216 ай бұрын
Difficult to hear her
@twistedartisan21316 ай бұрын
Agreed. I've upgraded my main camera's microphone to a Rode which did an excellent job canceling background noise out. The SEMA show floor is extremely loud. However, my next equipment purchase will be a Rode wireless setup. The video would be that much better if they were both pinned with mics. Thank you for watching!!! I appreciate the feedback. It does help me improve...
@captainskater80476 ай бұрын
Nice job on wrapping the center console
@twistedartisan21316 ай бұрын
Thank you... Appreciate you checking out the video!!!
@heathmooreinteriors66027 ай бұрын
Man thats awesome. Thanks man!
@twistedartisan21317 ай бұрын
Shotgun handles worked perfect!!! Thanks for checking out my review V-log. Hope you enjoyed seeing the product installed from a different perspective. Also, thanks for your support on Upholstery Audio & Tech (Facebook Group)
@dewaynegarrison11037 ай бұрын
Can you help with finding a ship in Houston??🙏🏾
@twistedartisan21317 ай бұрын
Unfortunately, this video was made quite a while ago. I no longer think this repair is a viable option. I would check with your local Upholstery shops and their reviews to see who can remove and recover your dash. I’m not from that area but I know there are capable shops in that area. Sorry I couldn’t help more.
@throttleblip17 ай бұрын
To bad they barely covered the truck..who cares about the gas door!?
@twistedartisan21317 ай бұрын
Sorry you didn't care for the video. Thought I spotlighted the interior assembly and truck reveal pretty well. Not sure what you meant by gas door? If you want more information, C10 Builders Guide just dropped. It has more articles on the truck build!!!
@wfoguy8 ай бұрын
Very nice. Thank you.
@twistedartisan21316 ай бұрын
Thank you for watching!!!
@dannyrivera17038 ай бұрын
I love the commentary and listening to spermbreath in the background. Lol
@peterfromla75058 ай бұрын
Thanks for the video.
@peterfromla75058 ай бұрын
I think It's more than a van to you
@twistedartisan21318 ай бұрын
Thanks for checking it out!!!
@MachineEarth8 ай бұрын
Well we're safe as long as the door plugs dont pop out.
@twistedartisan21318 ай бұрын
🤣😂
@a_tired_wendigo8 ай бұрын
Rad af
@twistedartisan21318 ай бұрын
I thought so as well!!!
@a_tired_wendigo8 ай бұрын
@@twistedartisan2131 thank u for sharing something cool with everyone! I had no clue there was such a big difference between the materials for planes and everything else rlly neat to see in action :)
@twistedartisan21318 ай бұрын
Thanks for checking it out!!!
@1off8519 ай бұрын
Hit like button
@twistedartisan21319 ай бұрын
Yes, thank you!!!
@Submanca9 ай бұрын
If they are the exact same seats it would be up to perseption of which company you liked most.
@twistedartisan21319 ай бұрын
Not really. If two shops put on seat covers. And one of the shop steams the seat covers. Even though the seats are the same, it was the process that made the seat look better. That's what these processes can do for you if properly implemented.
@Submanca9 ай бұрын
@@twistedartisan2131 The thing is they are not the same. One is steamed and one is not. One put more work into their product to make it look better. Lets say you want to buy some vitamins At Walmart in the store but amazon also has them. Same box same everything. Who do you buy them from? Walmart because they are there but how much cheaper would they have to be at amazon to buy them from amazon?