how did you get the RaceFit matched up to the Graves headers? I'm looking into getting a full exhaust and I LOVE the look of racefit, so aiming towards that can but need headers lol.
@HVACOG9 сағат бұрын
@@griffinhimes2698 I had to flare the race fit out a bit to fit it and I cut it half inch shorter. See how yours fits.
@Mikey_5563 күн бұрын
I have the nicks version they are stiff for sure but once broken in should be nice
@HVACOG3 күн бұрын
@@Mikey_556 they’re getting better. But takes a long time for sure
@Mightycaptain7 күн бұрын
Did you ask for the tongue to be fully gusseted? Mine didn't come fully gusseted.
@mw65638 күн бұрын
Thinking of RF for my 40th Edition. Sounds crisp!
@HVACOG8 күн бұрын
@@mw6563 it’s bad ass. Fitting some graves headers to it. Will be nuts. Probably not too much difference but no cat will help and bigger header. Should see some nice flames out of it
@nanitto_1k10 күн бұрын
Best exhaust, have the same one too!
@HVACOG6 күн бұрын
@@nanitto_1k I matched mine with a graves header. Was a pain in the ass
@HuyNguyen-pb8ru11 күн бұрын
what is your cam type?
@ts0322764811 күн бұрын
Is that used 300v color in normal? Why the color look like mixed oil and coolant...Did you checked the coolant level?🤔
@HVACOG11 күн бұрын
@@ts03227648 it’s a new bike. I think it’s break in material. It had 350 miles when I put it in. Coolant level didn’t change.
@muhammadhussein233311 күн бұрын
superb bike...good ridee💯💯
@HVACOG11 күн бұрын
Thank you for stopping by buddy
@Mr.KH4111 күн бұрын
0:15 in case you didn't know, the 300v is not supposed to be used as engine oil for commute. The Motul 300v is supposed to be used for track sessions, and after end of the track day you're supposed to change the oil. The 300v don't even have API ratings coz the oil breaks down fast (shouldn't be kept in engine for weeks/months).
@HVACOG11 күн бұрын
@@Mr.KH41 that’s why I replaced it. My track friends run it in their bikes on the street I only ran it for 800 miles. I’m sticking to 7100.
@Mr.KH4111 күн бұрын
@@HVACOG That's good to hear. A lot of my colleagues have the misconception that the 300v is the top of the range oil for bikes (outweighing the 7100) despite a lot of them not going to the tracks at all. Some even used the 300v for year-round 😅
@HVACOG11 күн бұрын
@@Mr.KH41 yea, I’ve been hearing that. Glad I removed it because it was dirty w break in material. My bike got the tune on the way from 2wdw. Can’t wait to ride. Had to pull the tank and changed the filter to dna, blocked off the pair valve and disabled o2 sensor. Now it’s ready to go.
@mustangw8ford41512 күн бұрын
what a weird place to put the oil filter.
@HVACOG12 күн бұрын
Lmao !! Yeah it’s not the best
@gabrielroussel950220 күн бұрын
stay safe out there
@HVACOG20 күн бұрын
@@gabrielroussel9502 thank you
@gabrielroussel950220 күн бұрын
nice rides man!
@Dorito23022 күн бұрын
She is beautiful.
@rebalicu22 күн бұрын
Can you upload video of oiling your leather boots?
@jilldoesthings24 күн бұрын
I can tell your bird is very loved 🫶
@Mr1i11ard-Streams24 күн бұрын
that guy on the Harley is sooooooo HOT
@HVACOG24 күн бұрын
😂😂
@aen108324 күн бұрын
first, she's so cute!
@Nunurbusynes605125 күн бұрын
❤❤❤ beat boxing !❤❤❤
@HVACOG25 күн бұрын
@@Nunurbusynes6051 hahaha
@sanchezriosbernardoyared908025 күн бұрын
Bro, for crazy daily use, Zx6r or mt 10?
@HVACOG25 күн бұрын
@@sanchezriosbernardoyared9080 for daily daily , I’d probably get something with less racy ergonomics. The zx6r is too racy I think. Everyone is different though. I recommend to try both. To ride the zx6r correctly, you’d have to keep the weight off the steering wheel and use a lot of core and legs muscles. Gets tiring lol
@Akashhebbar25 күн бұрын
KawasakiAirlines - Nice video
@moisesisrael4674Ай бұрын
Can u get me the link for this exahust ? I have the exact same bike
im just getting into bikes so sorry if this a stupid question 😅😅 but do you just put the slip on and thats it? or do i need to get it serviced afterwards?
@HVACOGАй бұрын
@@hernvn9994 you remove servo cables and install a slip on exhaust. No need for service. If you start changing air filters and adding more air, then it will lean out the bike that’s already running lean from factory
@ReddyHHH210Ай бұрын
Ayooo got the same 636 krt .... thinking to get M4GP .... what u sayyyyyy !??
@HVACOGАй бұрын
@@ReddyHHH210 they’re sweet too
@shitfox_fk82292 ай бұрын
Could you drop a link where you got this?
@HVACOGАй бұрын
@@shitfox_fk8229 search “racefit black edition zx6r” in google
I have done many of those mods to my 2025 XC-W Hard Enduro. That plastic front guard only protects you from the mud getting on your brake disc. You need a real guard, if you are going to be doing hard enduro or out in the rocks. That Acerbis light though has to go. That is ugly as fook. Ruby R7 or the Baja Designs XL80, Hydra, XL40, Sport, etc. Looks good though man. Looking GOOD!
@HVACOG2 ай бұрын
@@Impedancenetwork thanks for the suggestion! Sick two stroke too. I would have gotten it but I like the plate. Many rides around me to just drive out of my garage. Maybe one day I’ll get the two stroke. Just bought the ninja zx6r. So no room or wife’s patience for more bikes
@Al-il7wy2 ай бұрын
I have a newer model ultra low nox from same company. Error code E1C. After one month, transducer null error. Measured output of transducer is .681v. The transducer label says null output should be.5VDC. I guess the board requires the null to be within 10%. Where can the transducer be purchased?
@HVACOG2 ай бұрын
@@Al-il7wy usually Goodman distributor or Johnstone supply. Unless you’re in a small town, they may require a contractors license. You can also input the model number into google and perhaps find it that way.
@Al-il7wy2 ай бұрын
@@HVACOG Got one from SuppliesDirect. Do you have any idea why these fail so often?
@TANNAMN2 ай бұрын
Would you still recommend these boots?
@HVACOG2 ай бұрын
@@TANNAMN yes
@TANNAMN2 ай бұрын
@HVACOG I'm a commercial electrician and do anything from running conduit in a ditch to finish install in an office building and im looking for that kind of do it all boot. However im torn between this forefront in bison or the OT in bison with composite toes. I've seen people claiming they have needed a resole as early as 5 months.
@HVACOG2 ай бұрын
@@TANNAMN idk, to me they’re pretty sturdy
@MisogynistNomad2 ай бұрын
Sweet scooter. Thanks for the review.
@HVACOG2 ай бұрын
@@MisogynistNomad fanks
@Kr3ative0thinker3 ай бұрын
Reeds on a 4 stroke? Could you elaborate please
@HVACOG3 ай бұрын
@@Kr3ative0thinker it’s in the intake tract right before throttle body. Remove them if you’re tuning.
@Kr3ative0thinker3 ай бұрын
@@HVACOG I didn't realize they put a reed valve in a 4 stroke
@HVACOG3 ай бұрын
@@Kr3ative0thinker its like an insert
@CsawBoots3 ай бұрын
Those look great! I have the same boot with a different sole. Such a well made boot, Quan is a true craftsman. 👏
@Isabelle087173 ай бұрын
can it talk?
@HVACOG3 ай бұрын
@@Isabelle08717 yes, quite a bit
@control710dabs53 ай бұрын
Im just not a fan of the younger flap thing I'd take it off
@HVACOG3 ай бұрын
@@control710dabs5 the Kiltie?
@Tudorguy-zw1ik4 ай бұрын
What kind of leather is in the boot?
@HVACOG4 ай бұрын
@@Tudorguy-zw1ik Maryam horsebutt
@awesomefish1004 ай бұрын
What is your fuel range? Any issues with the fuel pump or running out?
@HVACOG4 ай бұрын
@@awesomefish100 about 70 miles.
@Kolsch2215 ай бұрын
Has the bike ever bogged down and died then ran off and on?
@HVACOG5 ай бұрын
No. I have 50 hours on it
@HVACOG5 ай бұрын
I just came back from a 75 mile round trip. It did well. I don’t baby it. Always on the throttle
@stevenmarin50975 ай бұрын
does the tune make the bike run cooler. my bike is running hot . i just got the same bike.
@HVACOG5 ай бұрын
100%
@HVACOG5 ай бұрын
The fan never turns on dude.
@gregharris2928Ай бұрын
@@HVACOG I have the same bike, same mods, and my fan never comes on either but I’ve never overheated. I also have a 500 with the same mods and the fan on it never comes on. The tune really solves the lean running and overheating for sure. Happy trails.
@gabrielavrett5 ай бұрын
I ride the same bike man, definitely looking to get similar mods! Great bike i love it dearly
@HVACOG5 ай бұрын
Hell yeah dude, it’s a beast
@Joseph-lt5yz5 ай бұрын
Those aren’t nicks boots they’re garbage
@HVACOG5 ай бұрын
Uhuh 😂😂
@jamesbroderick53115 ай бұрын
Just purchased a pair of White's Perry Select (tobacco stampede color) and waiting for them to arrive. I also bought a pair of FP insoles to replace the stock one. We'll see how it goes when they get here!🤙
@HVACOG5 ай бұрын
Great choice.
@brianmartindale22215 ай бұрын
Nice setup and good review. The 350 is probably my next bike
@HVACOG5 ай бұрын
Good choice!
@jcaaa5w8375 ай бұрын
Looks good with the cap toe
@Xxxxxrrr64645 ай бұрын
Beautiful
@TAGhostman9685 ай бұрын
awesome video
@TommyNitro6 ай бұрын
How is the sizing compared to Red Wing heritage? My IR is half a size smaller than my moc toe.
@HVACOG6 ай бұрын
So these fit like Iron Rangers sizing. Maybe a tiny tiny bit more narrow because of the almond shape. I’m 10.5 IR and I bought these 10.5D
@TommyNitro6 ай бұрын
@@HVACOG Thanks. That helps a lot.
@Tudorguy-zw1ik6 ай бұрын
Hey man nice boots, how much did you pay for these boots? How long did it take to make and ship to you?
@HVACOG6 ай бұрын
800. I think it took a few months
@calebtinsley46756 ай бұрын
Congrats on the new bike, just got the same one. What brand is the exhaust cover and where did you find it?