CRF300 v KTM 890 drag race.
0:12
Жыл бұрын
Civic S type door plate renovation
1:14
First taste of TET by Alan Jackson
4:11
Mazda bongo spare wheel stuck
1:59
4 жыл бұрын
Bongo Sill preventative maintenance.
2:50
BMW (2008)116i serious oil leak fix
1:39
Ural sidecar boxing day run
1:37
4 жыл бұрын
Triumph T120 Bar end mirrors.
4:15
4 жыл бұрын
Lexus key fob battery replacement
0:48
St1300 Pan European coolant leak
4:47
Пікірлер
@tsmgguy
@tsmgguy 18 күн бұрын
Too late now, probably, but the clamp shown at 11:58 would not appear to be correctly installed. The clamp should contact and hug the flared flanges all the way around, with about four threads visible where the tip of your finger is. I see eight threads. For me, these clamps were very fiddly and a bit frustrating to install.
@cruiserbrahuk5411
@cruiserbrahuk5411 Ай бұрын
bought a lemon
@mattsurrey6138
@mattsurrey6138 Ай бұрын
Another tip I found the hard way, Put some thick masking take under that main T55 bolt so it doesn't damage the frame paint when its loose.
@dalemorris8699
@dalemorris8699 3 ай бұрын
The cam bushes have to be moved in or out to get the correct end float. This should be minimal. I can't remember the measurement but only a couple of thou.
@TomiG1975
@TomiG1975 3 ай бұрын
Hi! I planned to buy this crash bars but afrter this video i think its a piece of sh from Poland :(
@chubbybrown4real
@chubbybrown4real 3 ай бұрын
not happened, but thanks for heads up
@garfishahmed
@garfishahmed 6 ай бұрын
You’ve inspired me to pay someone to do this 🙏
@hlpang1075
@hlpang1075 7 ай бұрын
Doggy doesn’t like the X pipes 😂
@smashingturnips5353
@smashingturnips5353 10 ай бұрын
Feels like a pointless video?! Don’t understand
@NickFerns-rp9vx
@NickFerns-rp9vx 11 ай бұрын
I tried that too bro.
@timorridge3390
@timorridge3390 11 ай бұрын
Thanks, how easy does the mirror come off?
@andyh4573
@andyh4573 Жыл бұрын
This freezer was good when i bought it, had to do this many times, had it 17 yrs rust all over the front now, wiĺl not buy hotpoint again
@williamburns2714
@williamburns2714 Жыл бұрын
This video helped me fix my fridge. Thank you very much!
@MrImarcus
@MrImarcus Жыл бұрын
Didn't need any extra oil, put the lot in, and it was spot on. 👌
@RideOnBrother
@RideOnBrother Жыл бұрын
kzbin.info/www/bejne/gKvKY4uJf6yAjZI
@user-pb1mu7yq6r
@user-pb1mu7yq6r Жыл бұрын
Just got the same thing now. Thought it was the weep hole but it’s down the side of it. Taking a look at this video may help as having to change the coolant as service time. Thanks
@Toyorulesitall
@Toyorulesitall Жыл бұрын
Mine is leaking from the same place. Was it an easy fix?
@MrImarcus
@MrImarcus Жыл бұрын
Yes fairly easy and well worth the investigation. You are dealing with steel bolts through machined aluminium parts. If you are confident in cleaning, preparing and not overtightening then I would suggest it's straightforward.
@jimbrown9967
@jimbrown9967 Жыл бұрын
Hi my buttons work but no lights on right hand side and the Centre big button works when you press it but doesn't scroll when you turn it left or right any help??
@MrTeriyakiman
@MrTeriyakiman Жыл бұрын
Will this procedure work with an M&S Orange and Chocolate Mini Bites tub?
@MrImarcus
@MrImarcus Жыл бұрын
There is no denying, to use a tub such as this means you are indeed a cut above the Aldi tub results. Not only would I expect cleaner calipers and improved braking but a grin that only a discerning M&S shopper can enjoy.
@dickjackson25
@dickjackson25 Жыл бұрын
So where is it coming in from..?
@dm-ro4ho
@dm-ro4ho Жыл бұрын
Well done very informative, be great to hear if this is fixed the problem
@MrImarcus
@MrImarcus Жыл бұрын
Thankyou, yes it has, could be a combination of inner wing and roof gutters being sealed. Any case it's still holding.
@Dewi-fe1kq
@Dewi-fe1kq Жыл бұрын
Thanks for your reply that's great news! Have you used seek and seal in the past ,and that has been really helpful for difficult leaks to find. Thanks for taking the time to make the video and reply God bless
@MrImarcus
@MrImarcus Жыл бұрын
@Dewi Hey, welcome. Yes, I've solved a leaky Prius with roof seam cracks, that worked. Hope it solves your issue🙏🙏🙏
@fotospablogil
@fotospablogil Жыл бұрын
Good job! I brought an Africa that was in a crash and I had to got the original support here in Brazil, it was 500 dollars! Will do something like this whit the broken support and keep it as backup.
@MrImarcus
@MrImarcus Жыл бұрын
Thanks Pablo. Also consider the 'Camel Brace', which is money well spent given the tim it takes to construct your own. 👍
@fotospablogil
@fotospablogil Жыл бұрын
@@MrImarcus sounds like a good idea Marcus, thanks, will do!
@anaheimstcruiser2996
@anaheimstcruiser2996 Жыл бұрын
Same problem and I'm not a mechanic so I was taking off the gas tank to get to the leak😂😂😂😩
@MrImarcus
@MrImarcus Жыл бұрын
We've all been there mate. Hope you got it sorted. 👍
@stoneyvill
@stoneyvill Жыл бұрын
I'm having a similar problem with my Honda civic mk8 the water is coming from the cabin filter what could be the reason?
@mohindersembi7647
@mohindersembi7647 Жыл бұрын
Hi very interesting video I have the same Fridge freezer which sencer did you changed is it the one at bottom right hand side one the one it's have white colour? Please kindly let me know thanks Waiting for your reply
@MrImarcus
@MrImarcus Жыл бұрын
I don't remember changing a sensor, sorry pal. It seemed to be a fairly infrequent but consistent issue. Hope that helps.
@juliobarber4206
@juliobarber4206 Жыл бұрын
😴 p̳r̳o̳m̳o̳s̳m̳
@thatguyonanafricatwin
@thatguyonanafricatwin Жыл бұрын
I like your fix for that issue. 👍
@MrImarcus
@MrImarcus Жыл бұрын
Thankyou! Watched your video today, throwing your twin around the trails, very impressive indeed. 👏
@thatguyonanafricatwin
@thatguyonanafricatwin Жыл бұрын
@@MrImarcus You're welcome. Thank you 🙏
@tomthompson7400
@tomthompson7400 Жыл бұрын
looks great.
@MrImarcus
@MrImarcus Жыл бұрын
Thanks Tom, I'm cautiously optimistic.
@stevethomas3406
@stevethomas3406 Жыл бұрын
Excellent vid mate those bloody back clamps are twats lol I ended up buying new graphite seals made it much easier. Tec shocks next and your right about the quality 😍👍
@MrImarcus
@MrImarcus Жыл бұрын
Thanks pal glad it helped. Look forward to that roar under throttle. Nothing like it. 👍
@stevethomas3406
@stevethomas3406 Жыл бұрын
@@MrImarcus my previous bike was a super duke 1290 with too much grunt lol
@eggbanjo7425
@eggbanjo7425 Жыл бұрын
I connected my Camera to the Headlight Fuse and it works switch live - tested off and on with ignition key
@adambooth9630
@adambooth9630 Жыл бұрын
Do you not need to reset the eolys counter after filling this so the ecu knows its been done? Asking as im thinking of doing this myself, thanks
@MrImarcus
@MrImarcus Жыл бұрын
Yes, you do mate, I didn't do mine and suffered the light... otherwise went OK.
@nickaxe771
@nickaxe771 2 жыл бұрын
Can I as were did you get the tank rack from with suckers.....yes indeed its very lovely.
@MrImarcus
@MrImarcus Жыл бұрын
Sorry just seen this mate. Motone custom I believe.
@mcplutt
@mcplutt 2 жыл бұрын
Install the clamps on the x-pipe BEFORE installing it in the bike :-)
@nickaxe771
@nickaxe771 2 жыл бұрын
I wonder has anybody had the fuel injection system re-mapped after fitting an X-Pipe. I ask as I fitted a TEC X-Pipe to mine around a year ago to my 2020 T100. Love the engine sound and feel of the bike now and notice an increase in MPG. But what I have recently noticed and I am not sure if this is normal but took my spark plugs out recently and found the hot end to be quite white.....in me old carb days this would have been looked as as the bike running lean petrol/air wise and would not be good. Unfortunately I didn't check the plug color before fitting the X-Pipe. Of course with euro 4 emission standards it maybe right. Love to hear anybody's comments on plug colors before and after fitting the X-Pipe. Nick from Cheshire.
@MrTeriyakiman
@MrTeriyakiman 2 жыл бұрын
Nice wrist action!
@blakeyboy2
@blakeyboy2 2 жыл бұрын
Is it not possible to fill the hole in at the top to prevent water from getting in?
@mattthomson1689
@mattthomson1689 2 жыл бұрын
Thanks for showing us the corrosion or precipitate found on the water pump cover. Looks not too bad, but suggest obtaining pro-experienced advice, including a possible water / deposits analysis for best practice for internal cleaning and flushing. With radiator passages very small, incorrect cleaning (products) may decrease radiator effectiveness....ouch!
@mattthomson1689
@mattthomson1689 2 жыл бұрын
Q & C: Question, 2-part: A), Would someone share a coolant hose diagram, as viewed from riders position, with main fuel tank, air box, and throttle valves removed, looking at the hose connections to the thermostat housing? B), Two hoses come off the right side of the radiator, a small diameter hose clamped at the neck of the radiator cap, running about 16” to a ‘T’ connector, two lines then disappearing upward toward the fuel tank (Logic would have one of these connect to either the top or bottom of the reservoir; where would the other hose connect?). A middle-sized hose runs from the lower radiator hose ‘Union’ at the water pump cover, upward toward and under the fuel tank. This hose feels hard near the right engine bank and I suspect it is heat-damaged, ripe for replacement. I need to know if it connects to the thermostat housing, hopefully before I dig any deeper...all comments welcome!
@BeavistheLizard
@BeavistheLizard Жыл бұрын
Did you get anywhere with this Matt? I have just removed my failed Alternator... can see lots of crusty issues around all the hoses... I am in deep about to start cleaning up.
@kitesurfuk
@kitesurfuk 2 жыл бұрын
The bearing housing in the cover has completely disintegrated and worn away. I've just found the same issue on the gearbox cover for the same Gtech air ram mk 1. Seems to be a common problem.
@myz06rocks
@myz06rocks 2 жыл бұрын
That’s me! Just found this same issue. Only 40,000 km
@MrImarcus
@MrImarcus 2 жыл бұрын
Good that you spotted it pal. It's an easy fix compared to a breakdown or significant overheat.
@myz06rocks
@myz06rocks 2 жыл бұрын
@@MrImarcus it was easy to spot in the sense that the bike is currently on my lift while I do the valve clearance check. 11 of 16 out of spec and the other 5 right on the tolerance limit. Don’t believe what you read on the internet, do the work. 😀
@DOCTORALX
@DOCTORALX 2 жыл бұрын
Did you find where water was coming in from? I have the same issue
@LickyDischarge
@LickyDischarge 2 жыл бұрын
Going to guess the CRF1100 is very similar. Does that mean I can use those switched power supply wires to run my TomTom? please and thank you
@MrImarcus
@MrImarcus 2 жыл бұрын
Hey James, I'm not sure about 1100... if it is similar you could use them though personally I would go for the accessory wires above the headlights. You can get a dedicated connector for them.
@LickyDischarge
@LickyDischarge 2 жыл бұрын
@@MrImarcus thank you for the reply!. I’m being rather lazy by not wanting to take the front end apart. Will give it a look!
@eggbanjo7425
@eggbanjo7425 Жыл бұрын
@@LickyDischarge did it work buddy? i am trying to install my cameras to switch live, and tips
@LickyDischarge
@LickyDischarge Жыл бұрын
@@eggbanjo7425 no it didn’t unfortunately. I gave up, sorry.
@anisaklaas7285
@anisaklaas7285 2 жыл бұрын
there's easier ways to do this without messing up your entire ceiling.
@YamminHondas
@YamminHondas 2 жыл бұрын
be predictable... always.
@BoxerfanUK
@BoxerfanUK 2 жыл бұрын
Great idea
@bern7775
@bern7775 2 жыл бұрын
I could cry, identical problem. You described the sudden little pools of water, everything BUT as I’m not very handy, I panicked and have already ordered a new fridge/ freezer. Wish I’d found you sooner.
@stevenharris7788
@stevenharris7788 3 жыл бұрын
Thank you
@sparky337
@sparky337 3 жыл бұрын
Great video ! Very informative with the best tips out there 👌 You’ve just swong my dessision to fit one ☝️ more bloody money 💴😂
@zeez9053
@zeez9053 3 жыл бұрын
Thank you for guiding us through it
@zeez9053
@zeez9053 3 жыл бұрын
What a great video for someone who has this job in hand - takes the queswork out 🤘👍🇬🇧❕