LuV2reV

Пікірлер

@DaxOneTouch 7 күн бұрын

Can we have a link to where this kit is available, please

@crownvalleytrans 6 күн бұрын

Hi Don, This was a scratch build using the original plans sourced from the Mystic Seaport Museum . Other options are laser cut frame kits or fiberglass. modellers-workshop.com/category/laser-cut-frames/ www.rcyachts.com/JClass.htm Read first amyajclass.com/building-a-j-class-model

@geunheelee1634 10 күн бұрын

what is the name of the song??

@crownvalleytrans 9 күн бұрын

This is Vanishing Pointe by Richard Meyer.

@geunheelee1634 9 күн бұрын

@@crownvalleytrans thanks!

@domenicogiovannispano2496 10 күн бұрын

Molto bello dove trovare i disegni?

@kennethbradley2222 Ай бұрын

Very nice boat i have a santa barbra hulnumber 175 and a shamrock v as well

@crownvalleytrans Ай бұрын

Thanks, what state are you in?

@pierrevanhalteren5733 2 ай бұрын

Trully mazing work but how did you do to imitate the curved planking of the deck ? I mean how did you trace those lines initially ? using which tool or measurement device ? Also regarding the brass (?) chainplates, did you manufacture those yourself ? If yes were you able to source ready made items that required minimla mofidication or did you need to do it all by yourself from scratch ? I wish I could do the same but am at a loss in finding out how to get that result regarding both issues above.

@crownvalleytrans 2 ай бұрын

Hi, each plank is ripped on a table saw then flexed into position while trimming each end and CA'ed or glued into place one at a time with black construction paper placed between each plank for a caulked look. The chain plates were fabricated. www.onlinemetals.com/ amyajclass.com/building-a-j-class-model

@pierrevanhalteren5733 2 ай бұрын

@@crownvalleytrans thank you very much for that information !

@hallbergrassy352 2 ай бұрын

Great boat, beautiful! I have a similar one, but not sure what type, old and graceful though!

@davidangelo8902 4 ай бұрын

The J boats sure are pretty! Thanks for the video.

@mikeoneill8270 4 ай бұрын

0800 where do I get one

@crownvalleytrans 4 ай бұрын

Hi Mike, I found this one on CL, but took a couple of years of searching. You can buy prebuilt or build yourself. Here's a few links. rcyachts.com/JClass.htm modellers-workshop.com/category/laser-cut-frames/ amyajclass.com/

@alannewman85 6 ай бұрын

That is nothing short of spectacular!

@alannewman85 6 ай бұрын

Magnificent!!

@alannewman85 6 ай бұрын

I'm just blown away by the standard of craftsmanship of the deck. The fittings are truly beautiful, I imagine you boughtbthem, but maybe I'm gonna be corrected?!

@alannewman85 6 ай бұрын

This is a magnificent build and madification, I'm speechless looking at it, and it just really inspires me to want to scratch build. (I would still consider a kit, but not fibreglass)

@alannewman85 6 ай бұрын

I want to build a plank on frame J Boat - could anyone guide me in finding drawings and model building info?

@crownvalleytrans 6 ай бұрын

Hi Alan, Do you want to build from scratch or a kit? Building from scratch is cheaper, but requires a lot more time. -ed

@alannewman85 6 ай бұрын

@@crownvalleytrans Hi, firstly thanks for taking the time to get back to me! I'd consider both, a kit would have to be a timber kit. On balance I'd prefer the scratch route, I don't have so much cash to throw around but I am patient, methodical and good with my hands. Would be super grateful for anything you can suggest!

@crownvalleytrans 6 ай бұрын

Here's the frame kit to get started that I would recommend modellers-workshop.com/modellers-workshop-mw107-j-class-1937-ranger-116-scale-laser-cut-frame-set-total-length-102/ I can share a copy of Weetamoe's plans, but you'll be cutting out every rib individually from door skin material and would require a lot of man hours. Here's a build video of that process: kzbin.info/www/bejne/n2HPpquHmKx2bK8si=sd4g7K72Q-WgO6IB If your serious read this: amyajclass.com/building-a-j-class-model @@alannewman85

@cosmiccolonel 7 ай бұрын

No matter what angle you look at a J class, they just look beautiful, that goes for this one too…… outstanding!

@bradfordthompson8326 9 ай бұрын

Wow Beautiful model ....Did you Scatch build it..? THANK YOU for taking us all to the pond ..... 😂😂😂😂😂❤❤❤❤❤❤

@crownvalleytrans 9 ай бұрын

Yes, scratch build, but not me. kzbin.info/www/bejne/n2HPpquHmKx2bK8si=DTO_sCOSD5FS3Umh

@jonathanwheeler5626 9 ай бұрын

Just beautiful

@geoffreybartlett9293 10 ай бұрын

Worthless video on rear mount removal as far as i can tell

@Juandongduck 11 ай бұрын

What transmission is this?

@crownvalleytrans 11 ай бұрын

3 speed Ford-O-Matic automatic transmission. www.hemmings.com/stories/article/ford-o-matic-transmission

@Juandongduck 11 ай бұрын

@crownvalleytrans thank you. I have a 55 here, the other guys are saying this cant be done, did they all have the same trans?

@crownvalleytrans 11 ай бұрын

@@Juandongduck Hi Jr. Yes, all three years came from the factory with a Ford-O-Matic automatic transmission. I've used this method for thirty years and was taught this method from individuals that were performing the same process in the 60's.

@Juandongduck 11 ай бұрын

Awesome! This is the route I am going to take. Thanks again.

@almonti46 11 ай бұрын

Espetaculo

@pascal5356 11 ай бұрын

Superbe vidéo. Magnifique réalisation. Cdlt.

@johnutting9615 Жыл бұрын

Magestic !!!!!!!!

@desnekke7073 Жыл бұрын

Very very nice model ❤❤❤

@dariocremona5320 Жыл бұрын

Wow, can i have the project?

@minochercowasjee Жыл бұрын

@crownvalleytrans Hi , Where do you sail this J these days ? I would love to see it sail in person. I sail at Mason Lake , Irvine . Thanks Minoo.

@crownvalleytrans Жыл бұрын

Hi, Unfortunately my RC hobbies have been put on hold due to a forced relocation of my business, but I'll be back sailing soon.

@minochercowasjee Жыл бұрын

@@crownvalleytrans Wishing you fair weather and hope to see you sailing again in Mason Park. Really enjoyed seeing your boat sail. Thanks

@brandonrucker8328 Жыл бұрын

Is this a kit, or can I buy instructions to build this?

@crownvalleytrans Жыл бұрын

Hi Brandon, Great question! Options for both are available. This boat was built from scratch using plans from the original boat that was built in the 1930's, but at a reduced scale. kzbin.info/www/bejne/n2HPpquHmKx2bK8 Copies of J class sailboats can be found at maritime museum's. Or there's a laser cut frame kit option which will save a lot of time. modellers-workshop.com/category/laser-cut-frames/

@SCARPENTER290 Жыл бұрын

Absolutely beautiful and an excellent build. Music was awful.

@crownvalleytrans Жыл бұрын

Thank you! As for the music, KZbin's music library definitely leaves something to be desired.

@63grandsport11 Жыл бұрын

I love real J's This one too. What do you think of the Santa Barbara S/B ?

@crownvalleytrans Жыл бұрын

I haven't been able to get my hands on a Santa Barbara yet, but looks like a fun boat to sail and more manageable than a J

@63grandsport11 Жыл бұрын

@@crownvalleytrans Its to bad your in CA. I have teak planked SB that won awards at model shows. Hull #967 with Black sails that I haven't put in the water since 1985. Its on display in my house eversince.

@63grandsport11 Жыл бұрын

I meant rosewood planked deck

@crownvalleytrans Жыл бұрын

@@63grandsport11 Pictures please and nice 63 vette!

@63grandsport11 Жыл бұрын

@@crownvalleytrans You want pics of the SB right. Il have to take some.

@Wilhuff_T Жыл бұрын

Elegante y majestuoso. Buen trabajo.

@crownvalleytrans Жыл бұрын

Gracias

@dickcaspari1421 Жыл бұрын

where can i get a suit of sails

@crownvalleytrans Жыл бұрын

ehsails.com/

@EristiCat 2 жыл бұрын

It's not clear to me if you removed the tailshaft and then the middle part or do you need to remove the middle part before the tailshaft can come out. Or to ask a different way, is it possible to remove only the tailshaft without removing or disassembling any other parts of the transmission?

@crownvalleytrans 2 жыл бұрын

The tail shaft assembly is unbolted and slid back far enough to allow the case (middle part) to be dropped down and out/removed. Once the case is removed then and only then are you able to remove the tail shaft assembly.

@EristiCat 2 жыл бұрын

@@crownvalleytrans Thanks

@1toastandjam1 2 жыл бұрын

Where can you find a set of plans to build one old school plank on frame I’m not interested in a fiberglass shell thank you.

@crownvalleytrans 2 жыл бұрын

Hi Stan, If you're ready to invest 500-600 hours I have plans for this particular boat.

@TailEndCharlie-fi9gd 12 күн бұрын

@@crownvalleytranswould it be possible to get the plans from you?? I really would love to build one!! Please! 🙏

@crownvalleytrans 11 күн бұрын

@@TailEndCharlie-fi9gd Absolutely! Send me your email. Thanks, ed

@SailboatRC 2 жыл бұрын

Looking simply stunning!! :) Very nice craftsmanship. Are there also some IOM class sailboats there as they are also amazing boats and it seems like this pond would be amazing for this kind of activity?

@crownvalleytrans 2 жыл бұрын

Club Schedule www.ocmsc.org/

@alexmirich7343 2 жыл бұрын

Very nice setup, for sure; what’s the Hitec 755 servo for…rudder? Could not get info for the gearbox; is that a 7:1 reduction?

@crownvalleytrans 2 жыл бұрын

Hi Alex, Yes, the 755 is the rudder servo. This Sail Winch is from ServoCity and is Discontinued, specs are 7:1 ratio, 180 degree counter clockwise max rotation with a D950TW 32-Bit, Ultra Torque, Titanium Gear, 486 oz/in torque. ServoCity does offer Sail Winches, but no longer offers the top flange.

@themusicalcorner4086 2 жыл бұрын

Woow

@davidkennedy4845 2 жыл бұрын

There may be faster yachts, but there is no other yacht design which compares with the grace and magnificence of the J class in life size or scale model. Lovely work.

@crownvalleytrans 2 жыл бұрын

Thank you

@TheBrokenMountainBiker 2 жыл бұрын

What a stunning looking yacht!! It just glides across the water.

@rebuildingtogetherfoxvalley 2 жыл бұрын

Where did you source the plans to build Weetamoe?

@crownvalleytrans 2 жыл бұрын

Some J's are fiberglass. rcyachts.com/JClass.htm Others are laser cut kits. modellers-workshop.com/category/laser-cut-frames/ Weetamoe is a scratch build. All originate from the original full size plans which are available from Maritime Museums.

@kevincruz4045 2 жыл бұрын

If this is the Willow Green 57 I think it is it was my fault that trans needs service. When I installed the engine and transmission into the car I only put 4 courts of fluid in the trans then started the engine to break-in the cam. I never added more fluid to the transmission because I forgot. So remember that you need a dedicated person to fill that transmission up quickly.

@romanwisler2879 2 жыл бұрын

What an Nice Boat and great work. How long and tall is this Boat? Thanks for showing us this Beauty.

@crownvalleytrans 2 жыл бұрын

BUILDERS: BOB EGER JOHN HANKS SCALE: 1/16 LENGTH: 94” WIDTH: 16” MAST HEIGHT: 104” OVERALL HIEGHT: 122” REMOVABLE BALLAST: 60LBS HULL: PLANK ON RIB PINE GLASS OVERLAY DECK: PLANKED ALDER & MAHOGANY

@brewmorgan8942 2 жыл бұрын

Beautiful

@hunterbuckley8453 3 жыл бұрын

Hey my dad has a 1956 thunderbird and we are having transmission problems. I was wondering if you could tell me where the shop that did the transmission removal and rebuild? And how exactly did you remove the transmission? It’s hard to tell through the pictures.

@crownvalleytrans 3 жыл бұрын

Southern California @ Crown Valley Transmission

@hunterbuckley8453 3 жыл бұрын

@@crownvalleytrans thank you sir. I don’t think that’s going to do us any good lol. We live in Ohio. But thanks for responding to my comment and trying to help

@hunterbuckley8453 3 жыл бұрын

@@crownvalleytrans is there a way you could send me a step by step like they did in the video? It would be very helpful. I can’t find any other video that take the transmission out in two pieces

@grafwiloff 3 жыл бұрын

Every day a little look! She is sooooo nice ...⛵️⛵️⛵️⛵️⛵️🌊🙋🏼‍♂️🇨🇭

@chrislundgren182 3 жыл бұрын

Do they allow other RC boats on the lake?

@crownvalleytrans 3 жыл бұрын

Unfortunately not. That's how I ended up running sailboats. I do miss my gas and nitro hair-raising go fast boats!

@Hima15593 3 жыл бұрын

Where can I buy the shiny parts

@Hima15593 3 жыл бұрын

How do I get hard ware and those little brass decorations

@crownvalleytrans 3 жыл бұрын

Chain plates and mast plate are fabricated by hand and as for the helm and binnacle (let the search begin) Link for brass stock below. www.mcmaster.com/

@MrModeller 3 жыл бұрын

Wow, nicely done. So this is completely scratch build, then? There is no digital version from what I can see?

@crownvalleytrans 3 жыл бұрын

Yes, trace and cut every part. Approximately five hundred hours. Here's more videos, sorry for the quality. amyajclass.com/construction-videos

@MrModeller 3 жыл бұрын

@@crownvalleytrans The videos are plenty fine, thank you! They are an excellent resource, as well. I had not seen the new J-class website before. That's really great. I will direct people that way because I do have requests for information. I am sure the site will help drive business. I will share it on my Facebook page, as well.

@MrModeller 3 жыл бұрын

It looks like a much older construction. The first video shows the refinishing of the model. It would be nice to see the construction from the frames onward. I do not see a design for Weetamoe among the drawings I have collected over the years.

@crownvalleytrans 3 жыл бұрын

Sorry, my channel is a little convoluted. You are correct in that it is a older build. Here's the construction video you were inquiring about. kzbin.info/www/bejne/n2HPpquHmKx2bK8

@MrModeller 3 жыл бұрын

@@crownvalleytrans So a completely scratch build then? No digital files? Nicely done!

@Lozzie74 3 жыл бұрын

Lovely boat complemented by beautiful music.

@crownvalleytrans 3 жыл бұрын

@user-tv5sm1ms4y 3 жыл бұрын

настоящая модель!)

Ең жақсы KZbin

Пікірлер