ahah yeah you're right :D

Grazie! Ho messo un assetto Nitron R3 e scarico Cargraphic. Come cerchi uso gli originali oppure OZ alleggerita, a dipendenza.. Come pastiglie freni uso Endless ME22 e 20.

@@DenfMotorsports grazie, auto fantastica

The E46M3 has a couple of "weak" spots, but other than that the car is quite solid. Good maintenance is key, and you'll get lots of happy miles out of it just like I did!

@@DenfMotorsports I have replaced my rod bearings, vanoss, and reinforced subframe with bimmerworld expanded plate kit but it still feels wrong I love to take care of the car it just feels wrong to rev the engine too much. Especially with the m clunk from the free play in differential

@@juicewrldclips6523 Well then you are all set if you did all that work! The engine will be fine, just do an oil change every 10k km and it will last no problem.. the head gasket may be due at some point, depending on how many km you already did. There is a way to fix the M clunk from the differential as well actually.. in my car it wasn't as bad, so I never felt the urge to do something about it. Limitedslip.de for sure has a solution. But remember, it's all about enjoying the car you have, otherwise what's the point?

@@DenfMotorsports my car has 120k miles

Yes, it wasn't the usual cooling pipes popping out, instead, here a cooling hose just exploded🤦

The Mezger soundtrack is indeed quite intoxicating. The new car features a full Cargraphic R system, which now spreads the love also to those outside :D

Thanks, the Manthey geometry was a step foward (I run it also on the new car), but it didn't solve the odd oversteer issues I encountered several times with the car, which could have been caused by excessive bump steer (experiencing it in Kesselchen in the fast left corner is not that fun). To counter this I wanted them to install adjustable toe links which give you control over the toe-curve. But because they were not familiar with the Demonspeed toe links I got, they didn't fit them. At the end of the day the most important part would have been to solve the issue, and they could have just fitted the 997 cup toe links instead, but no such effort was made. Now, the new car handels differently (better) even without other toe links, which might indicate that there were other things going on as well but that nobody was able to properly diagnose...

@@DenfMotorsports Was the setup only done once or tried out several settings?

@@GT4-CS They said that there aren't really different setups, and that the only thing that usually changes is the ride height. For GP track lower than for the Nordschleife. To be fair, the geometry seemed to work quite well (I am still using the same specs as in the old car). Of course it would have been better if the underlying oversteer/bumpsteer issue (which span across different setups) would have been adressed, since I specifically asked for that and also brought up a solution (which they dismissed without providing an alternative). What also would have been nice is a correctly filled out spec sheet (the position of the rear anti roll bar was different to what it stated on paper..but these are details). Probably between 21-24 september I'll be at the Nürburgring with the "new" car.. BTW: you are Sven from the M-forum? I seem to recognise the profile picture..

@@DenfMotorsports Oh that's a shame. They are usually very helpful and accommodating to requests. I had a KW Clubsport - 2 WAY in my M3. The first setting wasn't 100 percent either and we had made the compression stage 1 click softer at the front and rear and the rebound stage 1 click harder at the front and rear. The altitude stayed and then it was perfect for me. Maybe you try that. Yes, I'm also registered in the M-Forum as M3_Sven. Are you there too? Oh, das ist schade. Normalerweise sind Sie sehr hilfsbereit und gehen auf die Wüsche ein. Ich hatte in meinem M3 ein KW Clubsport - 2 WEge. Die erste Einstellung war auch nicht 100 Prozent und wir hatten die Druckstufe vorne und hinten 1 klick weicher und die Zugstufe vorne und hinten 1 klick härter gestellt. Die Höhe blieb und dann war es perfekt für mich. Eventuell versuchst du das mal. Ja, bin auch im M-Forum als M3_Sven angemeldet. Bist du auch dort?

​@@GT4-CS They did make some changes to the damper settings, which made the car a little bit more compliant. But now on the new car I changed the springrates and I now have a proper dual spring set up (with tenders, rather than helpers) and the result is very impressive. I am looking forward to trying the new suspension setup on the Nordschleife in september. The first tests I did in Mugello and Tazio Nuvolari were quite promissing. M-Forum yes, since 2011 I think (Denf!)... I had an E46 M3 for about 8 years (what a great car that was). I did quite some trackdays with that car as well, it is featured in a couple of videos on my channel.

Before selling the car I test drove another 996 GT3, and was quite surprised at how different it behaved. I managed to sell this car quite well and since I am very stubborn... I bought another 996.2 GT3 ahah but this time a Clubsport version. I salvaged the Nitron suspension from this car but decided to significally change the springrates. I talked a lot with a Nitron engineer and based on my input and experience with the previous car, we decided to try a custom solution. The new car feels now very different and I am looking forward to bringing it to the ring. The first tests I did (on more forgiving tracks) look very promissing! :)

I found a 996.1 gt3 cup car in Japan. Lot cheaper than a gt3. Thinking to convert to a street car…

@@WKBaker4 I see why this could seem appealing, but be aware of all the differences that there are between a GT3 cup car and a street car. The biggest difference being the engine, which in case of the cup car does not come with Variocam. This means that driving around in normal traffic is going to be a headache, since the car doens't really want to do it in the first place.

@@DenfMotorsports right, not a practical street car at all. Luckily out of my driveway is some of the nicest driving road in Japan and some nearby tracks. Of course the gt3 street car would still be ideal! I’ve rebuilt a air-cooled engine with my dad (videos on my channel) and was surprised to learn that the case halves are basically the same from early 911s to the 996. The 996 gt3 engine is such an awesome design.

@@WKBaker4 Having amazing roads and racetracks just out of the drive way obviously helps! There are a couple of people (UK/USA) who converted the Cup car also for "street" use, so it is definitely doable. I was just trying to cation you not to underestimate the implications. The 996 GT3, GT2 and turbo are built on the Mezger block, which is very different from the, at the time, newly designed Carrera engine. The Mezger block itself still has a 964 part stamp iirc. Anyways I wish you good luck in finding a suitable project car!

Lol the jawline n everything

Thanky, the car was on Michelin Cup 2.

ahah close, I live in the italian speaking part of Switzerland! But this guy was unbelievable, I encountered him already during previous laps where, among other things, he overtook me under yellow. Then he insisted on riding EVERY curb you usually try to avoid on the ring, while sometimes driving through the wilderness (the fog you see is actually him who put 2 wheels on the grass...). Here you can see what happened the lap before ahah kzbin.info/www/bejne/epbOqpxmjdybmLs

Yes, I was running the stock ratio. Personally, if I had to choose, I would go for a 3.91 ratio, as 4.1 would be too much for me.

@@DenfMotorsports If it would be too much for you then maybe I should reconsider! nice driving btw

@@richardflood3058 Well as always the answer is "it depends". Based on your use case it could make sense to put in a 4.1. For me, who wanted to have some comfort also on longer journeys, a 4.1 was off the table. If I had decided to rebuilt my diff, I probably would have considered a 3.91. Furthermore, on smg putting in a 4.1 means you have to adapt the software (fyi). If you are planning on still taking the car on longer road trips I wouldn't go past 3.91. If it's only used on back roads and you are giving it the beans the whole time then maybe. Hope this helps, and thanks for stopping by! Cheers

@@DenfMotorsports Thanks for the great advice. I have a normal manual and it's mostly used for weekend blasts but depending on the weather i'll take it work. I mainly ride a motorcycle. I'm starting to think the 3.9 is the better option since my commute is quite long (25 miles on the motorway). Anyway thanks again :)

Michelin cup 2.

Aah nice car, congrats. Driving around Laguna Seca must be a really cool experience as well!! Happy that you enjoyed the video, take care of you and your S54 :)

Thanks! car had only a modified oem back box. "Trueblue mod" as it is known here. I absolutely loved this exhaust 😎