Жыл бұрын
3 жыл бұрын
Пікірлер
@JuanRamirez-ou1bz 6 күн бұрын
Is it normal for the air release valve to drop water?
@IonianSoldier07 5 күн бұрын
I havent seen that in the case with mine. Just guessing it could be a loose waterhose?
@marklebeau5390 16 күн бұрын
Not sure if you'll be willing to do this, but i've contacted craftsman and they could find it either. Could you scan that owners manual for me and send it to me, would be a great help. mine didnt come wuth one!
@IonianSoldier07 16 күн бұрын
I would recommend using the website, www.manualslib.com/ It has thousands of manuals for different things. In the meantime, I will search for the 3100 PSI specifically.
@marklebeau5390 15 күн бұрын
@@IonianSoldier07 tried that as well not there
@Jrob2786122 Ай бұрын
Water is from the manufacture test for sure!
@user-fo3mm6wu9z Ай бұрын
i loaned mine to my neighbor who couldnt get it to run, he filled the soap container with gasoline, is it ruined?
@IonianSoldier07 Ай бұрын
Im no professional, but. I dont think it would be ruined. The soap container should pop on and off with a hose that mixes the soap with the water.
@user-fo3mm6wu9z Ай бұрын
@@IonianSoldier07 its a craf5tsman 950 model the soap container is seperate attached at the bottom
@patrickromero1068 Ай бұрын
How has it worked so far? I had an issue with mine
@IonianSoldier07 Ай бұрын
The sprayer works fine. I just have to be extra mindful of the hose.
@patrickromero1068 Ай бұрын
What kind of gas do you use?
@IonianSoldier07 Ай бұрын
I used unleaded. The manual said to use a specific unleaded fuel, though. Its like i think no greater than 80% ethanol
@CoolnSerious Ай бұрын
@@IonianSoldier07 no greater than 10% ethanol
@patrickromero1068 Ай бұрын
Awesome thank you. Mine is smoking pretty bad. Not sure what I’m doing wrong
@colestreit1500 2 ай бұрын
Why would you want it turned around? I mean technically you can but I wouldn't
@IonianSoldier07 2 ай бұрын
The outlet hose was directly in line with the part of the motor that gets really hot. Thats how the hose was ruined on the previous sprayer. Also, the manual displays it "turned around", which would keep the hose out of the direct line of the hot part of the motor.
@colestreit1500 2 ай бұрын
@@IonianSoldier07 you're talking about the exhaust 🤣
@xxQuimoxx-bn2lh 3 ай бұрын
God bless u brother, that was big help, thank u, I been riding around with the brights on lol
@djhoisington1350 6 ай бұрын
Thank you so much that help me alot
@yoz1967 Жыл бұрын
Found new headlight assemblies on ebay and got both for a little over $400. On the 2014 model ya have to remove the 2 10mm bumper screws under the hood on the top grill plate and 2 8mm screws in the wheel well above the tire where the 2 body parts meet and ya have to drop the whole bumper down while holding it against you (don't let it flop to the ground) then each assembly will come out. Changing bulbs in the old ones are a waste of time because the reflective surface inside the projector housing disintegrates. The new ones are awesome
@Quadrenaro Жыл бұрын
Oh thank god dude. My mom doesn't drive anymore so her car pretty much became mine, and these headlights are absolutely brutal. I feel like I can see like 20 yards tops with low beams. It's 10 degrees outside so the less I have to have my fingers exposed to that the happier I am. Was worried I'd have to unbolt pop stuff out like on my Grand Marquis.
@timgloeckner9260 Жыл бұрын
Thx I put in high low beams and after I put in the beam is shine very high...
@yoz1967 Жыл бұрын
Did you find your electrical issue? When I look at headlight replacements online I see some that look silver inside the low beam housing and others that look dark in them so I'm hesitant to purchase any and I can't seem to find a place to inquire about this.
@yoz1967 Жыл бұрын
this did not help at all, I put in new $50 bulbs and adjusted the heights and still too dim, wont even light up stops signs etc
@IonianSoldier07 Жыл бұрын
This was a temporary fix. I believe there is an electrical issue in mine. I bought the expensive headlights, still dim, and eventually burnt out (long before they should have). Until you take it to someone looking at for electrical work, you can adjust the high beams downward so you dont blind anyone.
@yoz1967 Жыл бұрын
@@IonianSoldier07 how do I adjust the high beams, I don't see an adjustment screw like the low beams have. I also watched a video- the guy basically says the projector housing inside doesn't have a good reflective surface, I don't even see any chrome type surface in mine.
@FiberOpticTTV Жыл бұрын
Dam. I have this same problem with my 2019 sorento. I can't find a fix to it because it doesn't let you adjust the lights up and down just right to left.
@texasnole8626 2 жыл бұрын
Hey thanks for this! Huge help
@hermannwunder3720 2 жыл бұрын
Doesn't work with xenon.
@ericpullen3717 2 жыл бұрын
Thanks for the tip bro but a little wrench action would've been nice
@joecarter9025 2 жыл бұрын
Thanks bud I really appreciate that I've been dealing with this shenanigans for quite some time now, had no idea it was as simple and easy as that, good look!